SOURCES SOUGHT
39 -- AMENDMENT
- Notice Date
- 6/3/2002
- Notice Type
- Sources Sought
- Contracting Office
- US Army ARDEC, AMSTA-AR-PC, Picatinny Arsenal, New Jersey 07806-5000
- ZIP Code
- 07806-5000
- Solicitation Number
- DAAE30-02-Q-0843/2
- Response Due
- 6/14/2002
- Point of Contact
- Kathy Hansen
- E-Mail Address
-
Email your questions to Kathy Hansen
(khansen@pica.army.mil)
- Description
- The combined synopsis/solicitation DAAE30-02-Q-0843 is amended as follows: We don't have any pictures or drawings of similar equipment. Pencil thin propellant strands are being conveyed. They have a nominal density of 1.5 g/cm3. The speed range is .05 to 10 in/min. The conveyors are loaded from an extrusion press. The material is not corrosive. Use 304 stainless or equivalent. Use a sanitary foodgrade belt with a center aligning piece for slow running or equivalent. Available voltage is 220 or 440. The equipment will be used weekly. Confirmation of the dimensions: 6" (inch) wide continuous belt and single adjustable stainless steel guide rails. Conveyor length will be 18' (feet). Conveyor height will be adjustable between 37" (inches) and 45" (inches).
- Web Link
-
US ARMY TACOM-ARDEC Procurement Network
(http://procnet.pica.army.mil/cbd/SRCSgt/060320022/060320022.htm)
- Record
- SN00087049-W 20020605/020603213201 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |