SPECIAL NOTICE
51 -- GAGE, INDICATING, INTERNAL
- Notice Date
- 1/22/2003
- Notice Type
- Special Notice
- Contracting Office
- General Services Administration, Federal Supply Service (FSS), GSA Hardware SuperStore (6FE), 1500 East Bannister Road, Kansas City, MO, 64131
- ZIP Code
- 64131
- Solicitation Number
- MPNB-SF202-3
- Archive Date
- 2/13/2003
- Point of Contact
- Betty Green, Contractor, Phone 816-926-1817, Fax 816-823-2136, - Betty Green, Contractor, Phone 816-926-1817, Fax 816-823-2136,
- E-Mail Address
-
betty.green@gsa.gov, betty.green@gsa.gov
- Description
- 1 PO OF 1 EA FDGM INC. P/N 185000052A01 5210-15-121-4197 UI: EA GAGE, INDICATING, INTERNAL: DESCRIPTION Used on Isotta Fraschini marine diesel ID36 engine. Used as alignment gage. FDGM Inc. part number 185000052A01. ITEM MARKING Mark each item in a permanent and legible manner with manufacturer's part number and name or identifying symbol. PACKAGING Packaging in accordance with standard commercial practice. PACKING The unit packages shall be packed in a close fitting fiberboard box in compliance with the Uniform Freight Classification and the National Motor Freight Classification requirements of Rules, Item 222, Sec. 3., Minimum 200, or ECT 32. MARKING All unit, intermediate, transport packages and unit loads shall be marked for delivery to civilian activities in accordance with the FED-STD-123G, dated June 6, 1997, or marked for delivery to military activities in accordance with MIL-STD-129N, dated 15, May, 1997, as applicable. PALLETIZATION Pallet Configuration: The pallets shall be 48-inch length x 40-inch width, general purpose, four-way entry, flush stringer, double-face non-reversible pallets. Pallet lumber used shall be bark free. Pallet Load Size: The load plus the pallet shall have a maximum height of 53 inches and shall not exceed 2500 pounds in weight. Pallet Load Configuration: The containers or items shall be placed in a suitable pattern to form a stable and balanced load. Palletized loads shall be secured to the pallet to insure that the load arrives intact. Stacking Strength: The pallet plus the load shall be capable of supporting three additional like loads without any product damage and without the load or the pallet collapsing. Vertical, horizontal, or filler reinforcement may be added as necessary to provide strength. Partial Palletized Loads: Less than one-half pallet loads shall not be used for stacking, unless load is balanced on pallet. The partial palletized load shall be used for top loading only. NOTICE OF REQUIREMENTS FOR SHIPMENT TO EUROPEAN UNION COUNTRIES: Per Clause D-FSS-468, non-manufactured wood pallets and other non-manufactured wood package material used in shipments destined for ultimate delivery to or through a European Union (EU) country shall comply with the Emergency Measures (2001/219/EC) adopted by the Commission of the European Communities (CEC). Additionally, shipments delivered to DoD distribution facilities or freight consolidation points for eventual delivery to or through EU countries shall comply with DLA PROCLTR 01-15.
- Record
- SN00244837-W 20030124/030122213743 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |