SOURCES SOUGHT
93 -- Gloves for Gloveports
- Notice Date
- 2/18/2003
- Notice Type
- Sources Sought
- Contracting Office
- Department of Energy, Duke Cogema Stone & Webster (DOE Contractor), Duke Cogema, 128 S. Tryon St. Suite FC12, Charlotte, NC, 28202
- ZIP Code
- 28202
- Solicitation Number
- 10888-R-0120
- Archive Date
- 3/18/2003
- Point of Contact
- Andy Grodzicki, Buyer, Phone 803-644-6796 ext 3007, Fax 803-644-6799,
- E-Mail Address
-
ajgrodzicki@duke-energy.com
- Description
- This acquisition is for the design, fabrication, inspection, testing, and delivery of gloves to be used in the Process Gloveboxes of the Mixed Oxide (MOX) Fuel Fabrication Facility (MFFF). The glove Supplier/Subcontractor shall design, fabricate, inspect and deliver gloves in accordance with the requirements delineated in this specification and comply with all applicable codes, standards and regulations. Glove material for gloves used in the MOX Process area shall be Neoprene Rubber. Glove material for gloves used in the Aqueous Process area shall be Hypalon.(Hypalon is is a registered tradmark of EI Dupont). Gloves are required in 30-inch, 32-inch, and 35-inch nominal lengths with a hand size of 9.75. Left hand, right hand, and ambidextrous styles are required. Gloves are required for the following types and sizes of gloveports: 1. 6" Clamp-in gloveports 2. 6? Weld-in gloveports 3. 8" Clamp ?in gloveports 4. 8" Weld-in gloveports Vendors are requested to visit the DCS MOX website to download the required forms. Potential Suppliers will need to download and send to DCS the following forms: Proprietary Agreement, Appendix I and Appendix II. The DCS website is www.dcsmox.com.
- Place of Performance
- Address: Various locations
- Record
- SN00260807-W 20030220/030218213156 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |