SPECIAL NOTICE
99 -- Lockheed Martin Space Systems Company, Michoud Operations is offering for sale by sealed bid a wide variety of Federal personal property stored at the Michoud Assembly Facility, New Orleans, La. 70l29
- Notice Date
- 4/22/2003
- Notice Type
- Special Notice
- Contracting Office
- Defense Contract Management Agency, Defense Contract Management Agency, DCMA Louisiana/East Texas, c/o Michoud Assembly Facility 13800 Old Gentilly Road, Building 350, New Orleans, LA, 70189-0283
- ZIP Code
- 70189-0283
- Solicitation Number
- S1903A0123
- Archive Date
- 5/27/2003
- Point of Contact
- Rosie Narcisse, Plant Clearance Officer, Phone 504 257-3802, Fax 504 257-0092,
- E-Mail Address
-
rnarcisse@dcmdw.dcma.mil
- Description
- This is your invitation for Bid. It contains descriptions of the property by lot number, sale terms, and a bid form. Bid amount is required by single lots which will include all items within that lot. You may bid on any one lot or all lots individually. Minimum of $50.00 required per lot. --------------------------------------------------------------- PROPERTY CAN BE INSPECTED FROM 8:00 AM TO 3:00 PM April 23-30, 2003, May 1 & 2, 2003 and May 5-8, 2003 -------------------------------------------------------------- DEFENSE FEDERAL ACQUISITION REGULATIONS Mandatory terms and conditions clauses 245.7309 - 245.7309.7 AND 245.7309.10 - 245.7309.14 apply. Standard Form 114C clause 24 prescribed by GSA FPMR (41CFR)101-45-3) applies. Results will be available after 5 business days following bid closing. They can be accessed via the internet at the Lockheed Martin Michoud Operations External web page or by contacting the Property Disposal Representative listed above. http://www.lockheedmartin.com/michoud/products/surplus.pdf REMOVAL OF PROPERTY MUST BE ACCOMPLISHED WITHIN TEN (10) DAYS FROM ASSIGNED REMOVAL DATE SPECIFIED IN THE NOTIFICATION OF SUCCESSFUL BID AWARD DOCUMENT. Property purchased in this sale cannot be brought back into the NASA Michoud Assembly Facility. --------------------------------------------------------------- Lot # 01 Large group of welding related items. Includes items such as head assemblies, torches, couplings, hose assemblies by manufacturers such as Bimco, Airco, Louisiana Welding and Idelec Inc. Also includes Air Pump (P/N 41-4062), (1 ea.) (for Binks 150 & 250 gal. pressure pot system) UNUSED -------------------------------------------------------------- Lot # 02 Assorted Machinery Support Items including Coupling (1ea.) (Waldron Coupling & Bore-Model # 3HSW10BSE), Steam Chest (1ea.) Murray Turbine-Model # W03140, Top Housing (1ea.) (Murray Turbine Chiller-Model # unknown), Monitors (2ea) (MicroTouch Systems Inc.-Model 00-MAM-8888, Gear Reducer (4ea) (Marley Manufacturing Co.-Model # R60LP, Shaft (1ea.) (Marley Fisher Engineering-Model 108-102), Rope (2ea.) (5/16" dia. Plow steel wire 306' overall length) Elm Supply), Controller (2ea.)(Lakewood Blow Down-Series # 412), Valve (2ea.)(2 ?" gate-Stockham) UNUSED Also included in this lot---Bundle Heat Exchanger (1ea.) (American Standard tube bundle sheet 316 S.S.- tube rolled & seal weld ends to tube sheet - w/gasket Type C-300) UNUSED ---------------------------------------------------------------- Lot # 03 Misc. Maintenance and Repair Items including assorted clamps, washers, gaskets, seals, rings, belts, bearings, hoses, switches, springs, packing kits, and others. Items support equipment makers such as Hobart, Tugit, Sunstrand, Kinney, Cybotech, Quackenbush, Oster and others. UNUSED ----------------------------------------------------------------- Lot # 04 Assorted Machinery Support Items including Hydraulic Power Steering Pump (variable) (1ea.) Skipper Hydraulic Inc.-Model PFC 2326DB, Universal Joint (Chrysler) (4ea.) (Mfg. # 4186892), Clutch Unit (1ea.) (Case Farm Tractor-Model 202825), Starter (2ea.) (Massey Ferguson-Model 3-436-716 M91), Flexible Coupling Assembly (2ea.) (Bush Hog-Model 6486), Drive Shaft (front) (3ea.) (Model 1663), Crankshaft (2ea.) (Kohler-Model 277624), Gear Box (3ea.) (Bush Hog-Model 685), Drive Shaft (2 ea.) (Bush Hog-Model 65227), Brake Assembly (2ea.) (Simon Krause-Model 01-18500, Motor (1ea.) (Simon Krause-Model 01-016700), and others. UNUSED -------------------------------------------------------------- Lot # 05 Assorted Electrical and Electronic Items including displays (assorted), printed circuit boards (assorted), cards (assorted), breakers (assorted), electric actuator (1ea.) (Breard Gardner-Model U27959), armatures (assorted), and transformers (assorted). UNUSED --------------------------------------------------------------- Lot # 06 Misc. Electrical Items including a large lot of relays, contactors, heater elements, lamps, fuse holders, detectors, coils, transformers and resistors. Also includes pressure transducers (1ea.) (5000 PSI, Verson Corp-Model L246107-153), Motor (1ea.) (Ridge Pipe Thread Machine Co.-Model 535), Meters (assorted by American Analog & Leeds & Northrup), Encoder (1ea.), (fits Scialky Fusion Tig Welder/Dynamics Research-Model 29-1b13-1270, and other items. UNUSED ---------------------------------------------------------------- Lot # 07 Misc. Vehicular Components. Includes wheel/master cylinders, oil filters, gaskets, connectors, springs, end rods and packing kits. Also includes an assortment of valves and bearings. UNUSED -------------------------------------------------------------- Lot # 08 Assorted Machinery Support Items including Heating Element (1ea.)(Air Dreco Inc.-Model 3-29-93-1-9115), Repair Kit (1ea.)(Parson & Sanderson-Model 476-0631-644), Transformer (1ea.)(John Carter-Model 546S), Impeller (2ea.)(McCurnin & Swan Inc.), Pressure Transmitter (1ea.)(W.C.Brandt Instruments-Model PI-DPT-0.50"-PCTT), Electroid Clutch Coil (1ea)(United Test Systems-Model 14BEC 56CC 20 12 90, K-Tron Reducer (1ea.)(K-Tron-Model 0233-00019), Centrifugal Pump Shaft (2ea.)(Parson & Sanderson-Model 7287082), Output Transmitter (2ea.)(John Carter Co.-Model 1151DP4E22M2B315), Controller (1ea.)(John Carter-Model 9396929) and others. UNUSED -------------------------------------------------------------- Lot # 09 Assorted Valves, Pumps and Regulators including Check Valves (3ea.)(Johnson Controls-Model CKV-1LFS-800-C1B2), Pioneer Coolant Pump (1ea.)(Monarch Machine Tool Co.-Model HR12S91E), Pilot Valves (3ea.)(LA Steam Equip. Co.-Model A-70 PILOT), Trap (6ea.)(1" Steam-LA Steam Equipment-Model 215-1), Check Valve (6")(1ea.)(Powell-Model "Check 6") and others. UNUSED --------------------------------------------------------------- Lot # 10 Machinery Support Items including Welding Support Items such as Dampeners (6ea.)(Air & Hydraulics-Model 805029), Differential Pressure Controller (1ea.)(Foxboro-Model 43AP-PA42C/PC), Motor (for Hobart Plasma Arc)(1ea.)(H.K. Porter Inc.-Model 183-1807570), Plasma Transformer (2ea.)(Hobart-Model 404960-31) and others. UNUSED ---------------------------------------------------------------- Lot # 11 Assorted Machinery Support Items including motors, springs, and power supplys. Also includes Seats (2ea.)(Fisher Controls-Model 20A4467X012), Pulse Rate Detector (3ea.)(Gulton Industries-Model 662902/201), 3-Pen Recorder (1ea.)(Deselle Maggard-Model 7713255CABA3), Impeller (2ea.)(Seco Service Engineering Co.-Model 959367), Sleeve Shaft (2ea.)(Ingersol Rand-Model 8B), Gear Shaft (1ea)(Ford Gelatt & Assoc.-Model 25-S60-111), Chiller Bearing (1ea.)(Carrier Machinery & Service-Model 19DH-171), Worthington Shaft (1ea.)(Premiere Equipment Co.-Model 97772405-Item 6) and others. UNUSED -------------------------------------------------------------- Lot # 12 Machinery Support Items including group of electrical components such as switches, resistors, potentiometers, overload heaters, relays and regulators. Also includes Voltage Controller (1ea.)(Linde Co.-Model ACV-3), Cable (pendent box-75' length w/plugs) (1ea.)(Louisiana Welding-Model 035375FT), Frequency Detector (1ea.)(Church Dialing Inc.-Model 79U8D5), Push Button Station (for Spanmaster Crane)(2ea.)(Spanmaster-Model PBC12BSMX1), Board (RAM)(1ea.)(Metlsaw-Model 100-0012) and others. UNUSED --------------------------------------------------------------- Lot # 13 Assorted Machinery Support Items including gasket kits, pistons, seal kits, springs (misc.), bearings (misc.), and others. UNUSED --------------------------------------------------------------- Lot # 14 Misc. Machinery Support Items including Collet (1/16"-1 3/8") for Monarch Lathe (1 ea.)(Monarch-Model 09005), Thermal Print Head Replacement Kit (2ea.)(Taylor Instrument Co.-Model 155S726), and assorted other items by such manufacturers as Deutsch, McCurnin, Vic Manufacturing and American Standard. UNUSED --------------------------------------------------------------- Lot # 15 Assorted Commercial Hardware Items including impellers, diaphragms, shim kits, nipples, seals, belts, packing, screens, webbing, O-Rings, gauges, switches, filters, meters, bolts, transmitters, gaskets and others. UNUSED ---------------------------------------------------------------- Lot # 16 Misc. Machinery Support Items by such manufacturers as Hobart, Williams, Jay Go, and others. UNUSED ---------------------------------------------------------------- Lot # 17 Assorted Office Support Supplies. Includes Paper (66 reams) (A-Z Paper Co.-3R3155), Paper (96 reams)(A-Z Paper Co.-Canary Index 2-Ply), Paper (44 cartons)(A-Z Paper Co.-White Index 2-ply), Paper (84 reams)(Office Depot-Red Index 2-Ply). Also includes Reels(10 cases)(Kodak-1442193), Tape (50 boxes)(Wang-725-1197-10) and other items. UNUSED ---------------------------------------------------------------- Lot # 18 One lot of Misc. Maintenance and Repair Items including gauges, hoses, plugs, cores, buoy lights, electric starter motors (assorted) and fans. UNUSED ------------------------------------------------------------------ Surplus Sales of Personal Property Bid Input BID(S) WILL NOT BE CONSIDERED FOR AWARD WITHOUT A SIGNATURE AND DATE Sealed Bid Sale No. S1903A0043 Bids must be received by Bid Security Office by Date/Time May 12,2003- 2:00 PM ------------------------------------------------------------------ Property can be inspected between 8:00 AM and 3:00 PM April 28-30, 2003, May 1 & 2, 2003 and May 5-8, 2003. ------------------------------------------------------------------ How to Bid: Enter the lot number and the amount you bid for each lot. If you need more space, you may reproduce this sheet. All responses are due at Lockheed Martin Michoud Operations, P. O. Box 29514, New Orleans. Louisiana, 70189-0514. ALL ITEMS OFFERED "AS THEY ARE, WHERE THEY ARE" Responses must be mailed in sufficient time to be received at the above location prior to the above date! Air shipments and hand carried responses shall be delivered to the lobby, Michoud Assembly Facility, Bldg. 350, 13800 Old Gentilly Road, New Orleans, LA 70129 and DEPOSITED IN THE LOCKHEED MARTIN BID BOX. No other telefax, verbal e mail or electronic responses will be considered. All responses shall be addressed to the specific attention of Bid Security Officer. SEND NO OTHER INDIVIDUAL A COPY OF YOUR RESPONSE. ( LOCKHEED EMPLOYEES ONLY MAY DEPOSIT SEALED BIDS IN BID BOX LOCATED IN THE CENTER CROSSOVER BLDG. 101 INSIDE OF ZONE 2) Responses shall be submitted in an inner sealed envelope and an outer sealed envelope. The words "SEALED BID" must be clearly visible on the inner and outer sealed envelopes along with the DUE DATE. Your envelope must show the sale number and the bid closing date and time. Results will be available after 5 business days following bid closing. They can be accessed via the internet at the Lockheed Martin Michoud Operations External web page or by contacting the Property Disposal Representative W. Wilson at 504-257-1708 or 504-257-1709. http://www.lockheedmartin.com/michoud/products/surplus.pdf ------------------------------------------------------------------ CAUTION: Check lot numbers and bids. Mistakes can be costly. MINIMUM BID $50.00 PER LOT NUMBER - Certified/Cashier Checks or Money Orders only to be presented at bidder pickup. REMOVAL of property must be accomplished by the purchaser within 10 days from assigned removal date specified in the notification of successful bid award document. Property purchased on this sale cannot be brought back into the NASA Michoud Facility. List lots in numerical order - Use additional sheet if necessary LOT # BID PRICE LOT # BID PRICE ------------------------------------------------------------------ ------------------------------------------------------------------ ------------------------------------------------------------------ ------------------------------------------------------------------ ------------------------------------------------------------------ BIDS MUST BE SIGNED TO BE ACCEPTABLE I agree to pay for and remove the property in accordance with the Terms & Conditions specified in this solicitation. Payment must be made with Certified/Cashier check or Money Order. __________________________________________________________________ PRINT -Bidder First Name Middle Initial Last Name __________________________________________________________________ Business Name(To appear on sale document) Please Print __________________________________________________________________ Number and Street City State Zip LOCKHEED MARTIN EMPLOYEE SIGNATURE BELOW CERTIFIES THAT THEY HAVE READ AND MEET THE PROVISIONS OF THE LM BIDDER ELIGIBILITY STATEMENT) ALL BIDDERS: MY SIGNATURE BELOW CERTIFIES THAT I WILL COMPLY WITH ALL APPLICABLE TERMS AND CONDITIONS SPECIFIED IN THE BID SOLICITATION. __________________________DATE____________________________________BIDDER SIGNATURE AND DATE (MANDATORY) Telephone:(Day) (Evening) ------------------------------------------------------------------ DEFENSE FEDERAL ACQUISITION REGULATIONS 245.7309 Mandatory terms and conditions-formal invitations. Sale by formal invitation shall include, as a minimum, the terms and conditions in this section. 245.7309-1 Inspection. The Bidder is invited to inspect the property prior to submitting a bid. Property will be available for inspection at the places and times specified in the Invitation. Failure to inspect property does not constitute grounds for the withdrawal of a bid after opening. 245.7309-2 Condition and location of property. (a) Unless otherwise specifically provided in the Invitation, all property is offered for sale "as is" and "where is." If the Invitation provides that the Contractor will load, then "where is" means f.o.b. conveyance at the point specified in the Invitation. (b) The description is based on the best available information. However, the Contractor makes no warranty, express or implied, as to quantity, kind, character, quality, weight, size, or description of the property or its fitness for any use or purpose. (c) Except as provided in Conditions 245.7306-8, Variations in Quantity or Weight, and 245.7306-10, Risk of Loss, no request for adjustment in price or for rescission of the sale will be considered. This is not a sale by sample. 245.7309-3 Consideration of bids. (a) Bidder agrees that this bid is firm and irrevocable within the acceptance period specified in the Invitation (or, if not specified, not less than ten or more than 60 days). (b) The right is reserved to reject any or all bids, to waive any technical defects in bids, and, unless otherwise specified in the offering or by the Bidder, to accept any one item or group of items in the bid. Unless the invitation provides otherwise, bids- (1) May be on any or all items; (2) Must be submitted on the unit basis specified for that item; (3) Must cover the total number of units designated for that item; and (4) Unit prices govern. 245.7309-4 Payment. (a) Purchaser agrees to pay the full purchase price for awarded property at the prices quoted in the bid. Unless an adjustment is required pursuant to Condition 245.7306-8, Variations in Quantity or Weight, payment must be made within the time specified for removal and prior to delivery of any of the property. In the event that any adjustment is made, payment must be made immediately after such adjustment. (b) The full purchase price, or balance if a bid deposit was required, shall be paid to the Contractor in cash or by certified check, cashier's check, traveler's check, bank draft, or postal or express money order. The Contractor is not required to extend credit to any purchaser. (c) The Contractor reserves the right to apply any bid deposits made under this Invitation by a bidder against any amounts due under a contract awarded by the Contractor under this Invitation. If the total sum due to the contractor is less than the amount deposited with the bid, the difference shall be promptly refunded. Deposits accompanying bids which are not accepted shall be promptly returned. 245.7309-5 Title. (a) Unless otherwise specified in the Invitation, title to property sold under this Invitation shall vest in the Purchaser when full payment is made. If the Invitation provides for loading by the Contractor, title shall not vest until payment and loading are completed. (b) A Standard Form 97, Certificate of Release of a Motor Vehicle, (or a State certificate of title) shall be furnished for motor vehicles and motor-propelled or motor-drawn equipment requiring licensing. 245.7309-6 Delivery and removal of property. (a) Unless otherwise specified in the Invitation, the Purchaser shall be entitled to obtain the property upon vesting of title in the Purchaser. Delivery shall be made at the designated location, and removal will be at the Purchaser's expense within ten (10) days of notification of bid award, or any additional time allowed by the Contractor. (b) The Purchaser shall reimburse the Contractor for any damage to the Contractor's property caused by Purchaser's removal operations. If additional time is required to remove the property, the Contractor, without limiting any other rights, may require the Purchaser to pay reasonable storage charges. 245.7309-7 Default. If the successful Bidder fails to make full payment, remove property by the specified date, or comply with any other terms and conditions of sale, the Contractor reserves the right to sell or otherwise dispose of any or all such property and to charge losses and incidental expenses to the defaulting Bidder. Bid deposits received (if required in the Invitation) shall be applied against such losses and expenses. 245.7309-10 Risk of loss. The Contractor is responsible for reasonable care and protection of the property until the date specified for removal. All risk of loss, damage, or destruction from any cause whatsoever shall be borne by the Purchaser after passage of title. 245.7309-11 Liability. Contractor and Government liability, when liability has been established, shall not exceed the refund of any portion of the purchase price already received by the Contractor. 245.7309-12 Oral statements. Any oral statement by the Contractor changing or supplementing the contract or any condition thereof is unauthorized. 245.7309-13 Eligibility of bidders. The Bidder certifies that he/she is not : (a) A Lockheed Martin employee whose duties include any functional or supervisory responsibility such as but not limited to signing in any manner on a Lockheed Martin Declaration of Excess Material/Facilities Equipment Excess Document, or holding the position of Declaration of Excess Material Coordinator/Facilities and Environmental Operations (Equipment Management) for the disposal of Lockheed Martin contractor acquired government property; (b) A civilian employee of the Department of Defense or the United States Coast Guard whose duties include any functional or supervisory responsibility for disposal of Lockheed Martin contractor acquired government property ; (c) A member of the Armed Forces of the United States, including the United States Coast Guard, whose duties include any functional or supervisory responsibility for disposal of Lockheed Martin acquired government property ; (d) an agent, employee, or immediate member of the household of personnel in (a), (b) and (c) above. .245.7309-14 Claims liability. The Purchaser or Bidder agrees to save the Contractor and Government harmless from any and all claims, demands, actions, debts, liabilities, judgments, costs, and attorney's fees arising out of, claimed on account of, or in any manner predicated upon loss of or damage to property of, and injuries to or the death of any and all persons whatsoever, in any manner caused or contributed to by the Purchaser or Bidder, their agents, servants or employees, while in, upon, or about the sale site on which the property sold or offered for sale is located, or while going to or departing from such areas; and to save the Contractor and Government harmless from and on account of damages of any kind which the Contractor may suffer as the result of the acts of any of the Purchaser's agents, servants, or employees while in or about the said sites. SALE OF GOVERNMENT PROPERTY GENERAL SALE TERMS AND CONDITIONS STANDARD FORM 114C 24. REQUIREMENTS TO COMPLY WITH APPLICABLE LAWS AND REGULATIONS It is the bidder's responsibility to ascertain and comply with all applicable Federal, State, local and multi-jurisdictional laws, ordinances, and regulations pertaining to the registration, licensing, handling, possession, transportation, transfer, export, processing, manufacture, sale, use or disposal of the property listed in the invitation. Purchasers or users of this property are not excused from any violation of such laws or regulations either because the United States is a party to this sale or has had any interest in the property at any time.
- Place of Performance
- Address: Lockheed Martin Michoud Operations, 13800 Old Gentilly Road, New Orleans, La. 70l29, , Point of Contact: Warren Wilson Property Disposal Representative, 504-257-1708 or 257-1709, e mail Warren.E.Wilson@maf.nasa.gov, ,
- Zip Code: 70189
- Country: USA
- Zip Code: 70189
- Record
- SN00309022-W 20030424/030422213114 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |