MODIFICATION
66 -- 66-IN-GROUND TRUCK SCALE
- Notice Date
- 8/12/2003
- Notice Type
- Modification
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, WR-ALC, WR-ALC/PK Acquisition Opportunities 235 Byron St,, Warner Robins, GA, 31098-1611
- ZIP Code
- 31098-1611
- Solicitation Number
- F09650-03-Q-0081
- Response Due
- 7/11/2003
- Point of Contact
- Jackie Kittrell, Contract Specialist, Phone (478)926-4511, Fax (478) 926-7549,
- E-Mail Address
-
Jackie.Kittrell@robins.af.mil
- Description
- A. The time and date for the receipt of offers is hereby extended from: 24 Jul 2003 to: 19 Aug 2003. B. Additonally, the revised purchase description is hereby added and is incorporated as follows: REVISED PURCHASE DESCRIPTION FOR MOTOR TRUCK SCALE FOR 78 LRS/LGRR 1. Design: The motor truck scale shall have a capacity of around 30 tons (60,000 lb) as requested for Air Cargo and Passenger facility. ? One (1) Heavy Duty Megabar Rodan Motor Truck Scale, 60 ton (120,000 lb) dual tandem axle capacity, three (3) section, arranged for a 40? x 11? factory poured 10,000 psi concrete platform. One complete bill of three (3) factory poured modules, six (6) stainless steel hermetically sealed load cells with mounting assemblies, approach ramp coping, pit coping, foundation hardware, grounding rods, and surge voltage protection for load cell isolation. ? Standard prep and paint process for this unit has all steel cleaned to an SSPC finish and coated with one (1) minimum 3 mil coat of Robinson Coatings 14-R-50 Epoxy Modified Primer and one (1) minimum 3 mil coat of Robinson Coatings 12-G-428 Rodan Grey Epoxy Modified Alkyd Enamel for a minimum total thickness of 6 mils. ? Digital Weight Indicator with INTALOGIX technology, self-diagnostics and modem support for calibration assistance, scale analysis and basic maintenance. Unit is housed in NEMA 12 enclosure for environmental protection, and surge protection is enhanced via optical isolation. Instrument includes In/Out and Full Length Axlematic software for automatic (attended) printing of individual axle weights and total. Additionally, instrument is modified to accept, print and store a 17-character TCN number. ? One (1) Document Printer with Accessory 16157 Interconnecting Cable to record time, date, TCN, Aircraft Number, individual axle weights and total weight on a scale ticket/shipping document. ? One (1) Form Printer for generating reports of TCN and Aircraft numbers from scale instruments Transaction Record Files. ? One (1) Traffic Control Signal to alert driver when to reposition vehicle on scale for recording the next in a series of axle weights. Control Light will include one (1) Automatic Control Relay Box to signal light change from unattended station. ? One (1) Keyboard for entering 17 character TCN to be recorded on scale ticket and stored in the instrument Transaction Files. 2. Construction and Installation Services: ?Supplier shall provide all labor (non-union) materials and equipment necessary to saw cut and demolish up to 5? of existing concrete for foundation construction, and haul spoils off property. ?Supplier shall excavate (in free soil only), form and pour a 40?x11? reinforced shallow pit concrete foundation using surrounding concrete for approach and exit from the scale. ?Scale foundation will include a sump hole and discharge sleeve for water drainage to storm sewer system on either side of intended site location. ?Construction services includes trenching, and placing up to 10 feet of conduit from platform to building and patch back. Up to 20 feet of additional conduit will be installed on the inside of the building from the point of entry to intended location of the instrument, printers and traffic relay control box. ?Supplier will install the mounting assemblies, load cells, and megabar concrete deck modules. ?Supplier will install the instrument/printers in an existing climate controlled cargo/security building provide by others. ?Supplier will install the traffic control relay and mount the traffic control light on the outside wall of the cargo/passenger facility. ?Certified technicians will test, adjust and calibrate the scale to specified Georgia Department of Weights and Measures criteria. ?Supplier will train WR-ALC/LGRR personnel on proper use, care and operation of equipment. 3. Warranty: ?All parts are warranted for one (1) year from date of installation against defects in materials or workmanship, to include damage from surge currents. ?All on-site labor costs are included during the warranty period with customer invoiced for truck and travel charges only after the first 30 days in service. ?Quoted price shall include a warranty of five (5) years from date of installation. C. The additional technical reqirements referenced under Special Notice number F8AWA831400100 are still applicable to this solcitation. NOTE: THIS NOTICE WAS NOT POSTED TO FEDBIZOPPS.GOV ON THE DATE INDICATED IN THE NOTICE ITSELF (12-AUG-2003). IT ACTUALLY FIRST APPEARED ON THE FEDBIZOPPS SYSTEM ON 13-AUG-2003. PLEASE CONTACT fbo.support@gsa.gov REGARDING THIS ISSUE.
- Place of Performance
- Address: Robins Air Force Base Georgia
- Zip Code: 31098
- Zip Code: 31098
- Record
- SN00400097-W 20030815/030813214550 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |