SOLICITATION NOTICE
10 -- Various parts for use on M252, 81mm Mortar
- Notice Date
- 8/25/2004
- Notice Type
- Solicitation Notice
- NAICS
- 332995
— Other Ordnance and Accessories Manufacturing
- Contracting Office
- TACOM - Rock Island, ATTN: AMSTA-AQ-AR, Rock Island Arsenal, Rock Island, IL 61299-7630
- ZIP Code
- 61299-7630
- Solicitation Number
- W52H09-04-R-0430
- Response Due
- 10/13/2004
- Archive Date
- 12/12/2004
- Point of Contact
- Cindy Ahrens, (309) 782-4372
- E-Mail Address
-
Email your questions to TACOM - Rock Island
(ahrensc@ria.army.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- NSN: 5310-01-441-4149 (PN 11580039); NSN 1015-01-441-4162 (PN 11580038; NSN 3460-01-442-0159 (PN 11580041); NSN: 1015-01-441-4160 (PN 11580037); NSN 1015-01-441-5502 (PN 11580045; NSN 3120-01-442-2307 (PN 11580044) and NSN 1015-01-211-4045 (PN 936265 3). The items being procured on this solicitation are a Nut, Self Locking; Ring, Locking; Collett, Machine; Pin, Firing; Plug, Breech; Washer and Adapter, Dovetail. The end use is the M252 81mm Mortar. Proposed contract is 100% small business set-aside. Any award resulting from this solicitation will be an Indefinite Delivery Indefinite Quantity Contract with three pricing periods. The guaranteed minimum quantities are as follows: 19 each PN 11580039; 150 each PN 11580038; 30 each PN 11580041; 1,200 ea ch PN 11580037; 58 each PN 11580045; 607 each PN 11580044 and 200 each PN 9362653. The maximum quantities per ordering period are as follows: 24 each PN 11580039; 200 each PN 11580038; 75 each PN 11580041; 1,200 each PN 11580037; 70 each PN 11580045; 700 each PN 11580044 and 200 each PN 9362653. Descriptions: (1) Nut, Self Locking (PN 11580039) Mat'l: .27-.48 AISI steel with electroless nickel plate on internal surfaces applied to thickness. Outside diameter is 4.50 inches with 96DP-Diamond knurling; height is 3.100 in 43125-12UN-2B internal threads. (2) Ring, Locking (PN 11580038) Mat'l: CR Steel 4.199 dia x 1.00 high x .027 thk. (3) Collett, Machine (PN 11580041) Mat'l: .27-.48 AISI steel with electroless nickel plate applied to .0030 thickness. Outside diameter is 4.00 inches; inside diameter is 3.420 inches; height is 1.800 inches. (4) Pin, Firing (PN 11580037) is made from .27-.46C AIS Alloy Steel per FED-STD-66. Approximate size is 2.06 inches x 0.75 inches outside diameter. (5) Plug, Breec h (PN 11580045) Mat'l: Steel bar per AMS 6484, AMS 6417, AMS 6415, or AMS 6414. Overall length approximately 4.5 inches. Overall width 2.29 inches. 1.750-12UNRS-2A OD threads on left end. 1.38 inch bored hole on right end. (6) Washer (PN 11580044) man ufactured from copper, size is .100 inches thick x 1.38 inches outside diameter x 1.25 inches inside diameter. (7) Adapter, Dovetail (PN9362653) used to facilitate mounting of sight unit to acceptable weapon bipod c/o dovetail adapter, 11829206; material is steel casting; composition 15-410, condition annealed; set screw, MS-18066-68. FOB is Destination. All or a part of this action is an unfunded FY04 requirement. Estimated issue date is 13 Sep 04. This solicitation will be issued electronically in acc ordance with FAR 4.502 and 5.102, therefore, hardcopies will not be provided. Vendors wishing an electronic copy may download it on or after the issue date by accessing the following address via the internet: https://aais.ria.army.mil/aais/SOLINFO/index.h tm. CAUTION: This solicitation will be issued electronically as will any amendments thereto. Because of this, the Government is under no obligation and is in fact unable to maintain a bidders mailing list. It is therefore incumbent upon any interested p arties to periodically access the above internet address in order to obtain any amendments which may be issued. Failure to obtain any said amendments and to respond to them prior to the date and time set for bid opening/receipt of proposals may render you r bid or proposal nonresponsive and result in the rejection of same. This solicitation incorporates a Technical Data Package (TDP) that cannot be provided via the internet. Vendors who need this TDP in order to prepare a bid or proposal are instructed to request same by submission of an email request to: tacom-ri-tdp@ria.army.mil. Any said requests should contain the following information; CAGE Code (if available), Company Name, Point of Contact (optional), Street Address, City, State, Zip Code, Telepho ne Number. A TDP will be provided by normal mail after the solicitation has been released to the internet.
- Record
- SN00653880-W 20040827/040826075428 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |