SOLICITATION NOTICE
19 -- Polish Stainless fixtures and fittings for RHIB Boats
- Notice Date
- 9/27/2004
- Notice Type
- Solicitation Notice
- NAICS
- 811310
— Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
- Contracting Office
- Department of the Navy, Naval Facilities Engineering Command, Naval Construction Battalion Center, CBC Code 520 2401 Upper Nixon Road, Gulfport, MS, 39501-5001
- ZIP Code
- 39501-5001
- Solicitation Number
- V55460-4275-1000
- Response Due
- 10/11/2004
- Archive Date
- 10/26/2004
- Description
- This statement of work on behalf of the Construction Equipment Department (CED) is in support of the maintenance and repair of 7 Meter and 24-foot Rigid Hull Inflatable Boat (RHIB) boats assigned to the Southeast Regional Maintenance Center (SERMC) Mayport, FL, fleet operations. Contract services are required for the cleaning and polishing of various fixtures, fittings, flanges and plate surfaces attached to the RHIB. Period of services is from 1 Oct 04 to 30 Sep 05. Services may require accomplishment for approximately nine (9) to twelve (12) times within the FY 05 funding year. The contractor/vendor shall furnish services as listed below to insure that a quality product is provided to the government: 1. All fixtures, fittings, flanges and plate surfaces shall be cleaned of all scale, rust and corrosion. Here is a list of sample of the services needed: ITEM QUANTITY/BOAT PRIORITY BITT 1-EA 1 TOWING EYE 1-EA 1 CLEATS 2-EA 1 CLEAT PADS 2-EA 1 TIE DOWN RING 8-EA 1 BACK-REST 1-EA 1 BACK-REST SUPPORT 2-EA 1 BACK-REST FLOOR SUPPORT 2-EA 1 BACK-REST SUPPORT PLATE 2-EA 1 AFT TIE DOWN 2-EA 1 AFT LIFTING EYE 2-EA 1 BACKING PLATE 4-EA 1 SCUFFER RING 2-EA 1 BOW STRAP U-BOLT 1-EA 1 HINGE PIANO 4-EA 1 HINGE HALF 8-EA 1 HING PIN 8-EA 1 AFT SPONSON RETAINER 4-EA 1 COMPASS GUARD 1-EA 1 REAR LOUVER 1-EA 1 TRANSOM SUPPORT 2-EA 1 REAR TRANSOM SUPPORT 2-EA 2 REAR LIGHT MAST 1-EA 2 LIFE RING HANGER 2-EA 2 WINDSHILD FRAME 1-EA 2 HAND RAIL 2-EA 2 CANOPY RING 1-EA 2 INTAKE GRILL 2-EA 2 BUE LIGHT ARCH 1-EA 2 DECK SOCKETS 2-EA 2 LIGHT ARCH SUPPORT 2-EA 2 TILLER ARM 1-EA 2 TILLARM EXT. 1-EA 2 LEXAN RETAINER 1-EA 2 HATCH PLATE 1-EA 2 2. All fixtures, fittings, flanges and plates shall be polished to a matt (non-reflective) finish. 3. All fixtures, fittings, flanges and plates to be cleaned and polished shall be at 1053.5 liner inches. 4. All fixtures, fittings, flanges and plates shall be sprayed or wiped with a protecting spray then wrapped for shipment. 5. The contractor/vendor shall provide transportation for the pick up and delivery of the materials to and from CBC Gulfport. Recommend the contractor/vendor be within the local commuting area to support on-site inspections(at vendors location) by CED personnel if necessary. 6. Contractor/vendor shall complete required services within a specific timeframe not to exceed a twelve calendar day turnaround from the date materials are picked up to delivery of the completed product. A two phase pick up and delivery of materials may be required. The items listed as priority one on the attached shall be picked up within 5 days from CED disassembly of the RHIB and returned within the 12 day criteria. When the contractor delivers priority one items back to CED, then the priority two items shall be picked up for services and returned back to CED within the same 12 day criteria as the priority one items. 7. The US Government reserves the right to inspect all materials for compliance and to accept or reject any or all materials for non-compliance to contract as stated.
- Place of Performance
- Address: NCBC Commanding Officer, 2401 Upper Nixon Road, Gulfport, MS
- Zip Code: 39501
- Country: USA
- Zip Code: 39501
- Record
- SN00682757-W 20040929/040927212217 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |