SOLICITATION NOTICE
30 -- Connecting Link, AH-64 A/D
- Notice Date
- 9/29/2004
- Notice Type
- Solicitation Notice
- NAICS
- 333613
— Mechanical Power Transmission Equipment Manufacturing
- Contracting Office
- US Army Aviation and Missile Command (Aviation), ATTN: AMSAM-AC, Building 5303, Martin Road, Redstone Arsenal, AL 35898-5280
- ZIP Code
- 35898-5280
- Solicitation Number
- W58RGZ04R0925
- Response Due
- 11/9/2004
- Archive Date
- 1/8/2005
- Small Business Set-Aside
- N/A
- Description
- Output NSN: 3040-01-352-1531, P/N:7-311411155-11 Input P/N: 3040-01-352-1531, PN/: 7-31141155-11 3040-01-147-4772, P/N: 7-311411155 3040-01-432-8240, P/N: 7-311411155-9 The contractor shall furnish all depot level labor, facilities, tools, test equipment and materials to repair / overhaul the Connecting Link, AH-64A/D, INPUT NSN/PART NUMBER: 3040-01-352-1531; P/N: 7-311411155-11; 3040-01-147-4772, P/N: 7-311411155; 3040-0 1-432-8240, P/N: 7-311411155-9 and OUT PUT NSN/PART NUMBER: 3040-01-352-1531, P/N: 7-311411155-11. Contractor furnished parts (CFP) shall be either manufacturers original equipment or from an approved, qualified and /or engineering tested vendor. No su rplus part shall be used or applied. The proposed contractual action will be for a five year, firm fixed price Indefinite Delivery Indefinite Quantity (IDIQ) type contract with a minimum quantity of 300 and the maximum quantity of 1920 each (FMS totals of 384). The Requirement is restricted to Tri Process Co. Inc. formerly known as (Western Methods) cage code: 6K585 and address 7721 Jefferson Street, Paramount, CA 90723 along with Hydro Honing Laboratories Inc. formerly known as (Fenn Manufacturing) cage code 8A961 and address 8 Eastern Park Rd. East Hartford 06108-1105. The reason for restriction is that the DMWR states in WP 00062 00-7 for the Blade Link that re-shot peening shall be accomplished. This only allows Tri-Process, Hydro Honing and CCAD t o shot peen the Link. This requirement is a critical safety item and contains critical characteristics. Overhaul and repair shall be accomplished in accordance with Depot Maintenance Work Requirement (DMWR) 1-1615-312, dated 07 February 2003 containing Nat ional Maintenance Work Request (NMWR) standards 7 Feb 2003 and the applicable AMCOM Engineering Directives (AEDs). This requirement is limited competitive. All responsible sources may submit an offer that may be considered by the agency. Firms that recog nize and perform overhaul and repair on the required item described above are encouraged to identify themselves. Submit documentation in accordance with the Competition Advocate's Shopping List CASLprocedures. These procedures are outlined at the following web site: https://www.redstone.army.mil/cmo/ No telephone or electronic mail request for solicitation will be accepted. Request for solicitation will be by datafax or mailed only. You may datafax your request to (256) 955-9237 or by mail, mail the comp leted proposal to, Commander ATTN: AMSAM-AC-LM-M, U.S. Army Aviation & Missile Command, ATTN: Tiffanie Willis, Contract Specialist, (256) 955 9183, Sparkman Center, Martin Road, Bldg 5303, Maintenance and Overhaul, 2nd Floor, Redstone Arsenal, AL 35898 -5000. This requirement is currently unfunded. Award will be withheld pending receipt of sufficient funds. The closing date annotated is an estimate date and may be adjusted dependent upon the date of release of the solicitation; however, the solicita tion will not close prior to the closing date stated above. See numbered note 22.
- Place of Performance
- Address: US Army Aviation and Missile Command (Aviation) ATTN: AMSAM-AC, Building 5303, Martin Road Redstone Arsenal AL
- Zip Code: 35898-5280
- Country: US
- Zip Code: 35898-5280
- Record
- SN00684385-W 20041001/040929212216 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |