SOLICITATION NOTICE
99 -- REQUEST FOR EXPRESSION OF INTEREST – 48” x 96” METAL PALLETS
- Notice Date
- 11/11/2004
- Notice Type
- Solicitation Notice
- NAICS
- 532490
— Other Commercial and Industrial Machinery and Equipment Rental and Leasing
- Contracting Office
- Department of Energy, Idaho Nat'l Engineering and Environmental Laboratory (DOE Contractor), Idaho National Engineering & Environmental Laboratory, 2525 Fremont P.O. Box 1625, Idaho Falls, ID, 83415-3920
- ZIP Code
- 83415-3920
- Solicitation Number
- Reference-Number-PROC27
- Response Due
- 11/30/2004
- Archive Date
- 12/15/2004
- Point of Contact
- Sonja Rish, Consulting Office Specialist, Phone 208-526-2290, Fax 208-526-7743, - Sonja Rish, Consulting Office Specialist, Phone 208-526-2290, Fax 208-526-7743,
- E-Mail Address
-
sja@inel.gov, sja@inel.gov
- Description
- REQUEST FOR EXPRESSION OF INTEREST – 48” x 96” METAL PALLETS I. INTRODUCTION Bechtel BWXT Idaho LLC (BBWI), Management & Operating Contractor of the Idaho National Engineering and Environmental Laboratory (INEEL), is requesting an expression of interest from prospective Vendors to provide quantities of 12 guage metal pallets. The pallets are used for storage of 55 gallon drums filled with specific radioactive and/or hazardous waste. This EOI shall serve only as a method of establishing technical capabilities and commercial interest. Qualified candidates may be invited to participate in follow-on technical/business discussions. II. BACKGROUND The INEEL is a U.S. Department of Energy (DOE) National Laboratory located approximately 50 miles from Idaho Falls, Idaho. The INEEL developed the current metal pallet design in November of 1993, has been using pallets fabricated to the design since that time, and desires to continue using the pallet design into the foreseeable future. Previous purchases of the pallets included lots as large as 1200 and as small as 200 each. The current pallet design conforms to a specific siesmic analysis performed by BBWI, and although minor modifications will be considered, the top slat and bottom runner configuration shall be maintained. Designs using flamable materials will not be considered. III. SUBMITTAL REQUIREMENTS Prospective candidates shall provide a written response to address the following: 1) A description of current experience, capabilities and existing fabrication tooling related to supply of the requested pallets. 2) Required lead time (receipt of order to delivery at the INEEL) for various quantities. 3) A sample listing of similar fabrication projects and past clients with a working knowledge of your firm’s capabilities in this area of expertise. 4) The name, phone and e-mail address of a representative of your firm. Please provide your expression of interest to the undersigned by Close-of Business, November 30, 2004. If you have questions, need additional information, or a drawing of the pallet, please contact Derek Flynn at (208)526-1951 or email fln@inel.gov. Technical questions must be submitted in writing (U.S. Mail or email). NOTE: THIS NOTICE WAS NOT POSTED TO WWW.FEDBIZOPPS.GOV ON THE DATE INDICATED IN THE NOTICE ITSELF (11-NOV-2004); HOWEVER, IT DID APPEAR IN THE FEDBIZOPPS FTP FEED ON THIS DATE. PLEASE CONTACT fbo.support@gsa.gov REGARDING THIS ISSUE.
- Web Link
-
Link to FedBizOpps document.
(http://www.eps.gov/spg/DOE/INEEL/ID/Reference-Number-PROC27/listing.html)
- Place of Performance
- Address: Idaho National Engineering and Environmental Laboratory 50 miles from Idaho Falls, ID
- Zip Code: 83415-3975
- Country: USA
- Zip Code: 83415-3975
- Record
- SN00707427-F 20041113/041111212741 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |