SOURCES SOUGHT
99 -- CYLINDRICAL GRINDING SERVICES
- Notice Date
- 2/16/2005
- Notice Type
- Sources Sought
- Contracting Office
- United Space Alliance (USA), 600 Gemini Avenue, Houston, TX 77058
- ZIP Code
- 77058
- Solicitation Number
- RFI-USAFL-LW-2005-02
- Response Due
- 2/25/2005
- Archive Date
- 2/16/2006
- Description
- Purpose of Request for Information (RFI): United Space Alliance (USA), LLC, through its offices located in Cape Canaveral, Florida, is soliciting sources capable of providing the requirements described herein. This acquisition is in support of USA?s prime contract NAS9-20000 - Space Flight Operations Contract (SFOC) with the National Aeronautics and Space Administration (NASA). Technical Requirements Description: Cylindrical grinding services for a lifting fixture. The part to be repaired is a 17-4 PH shaft, length 17.68 inches long. In cross section, it is about 3 inches in diameter for 10 inches of length then drops to 2.5 inches diameter and finally 2 inches. All work needs to be performed on the 3 inch diameter and the wrench flats milled into that diameter. The 3 inch diameter and the flats have been plated with class 2 chrome plate and now needs to be ground back to the drawing. The final diameter s/b 2.9951 +0/-0.0014 with a 63 micro-inch finish, final flat to flat distance s/b 2.500 +/-0.005 with a 32 micro-inch finish. The smaller diameter end of the shaft is bent at a 56 degree angle and its centerline (at the end) offset 5.68 inches from the centerline of the 3 inch diameter. This may create balance/interference issues if the shaft is spun. There is a 4.25 in deep centerline hole in the 3 inch end with 1-12 UNF-3B threads that may be used for fixturing though care must be taken not to damage the threads. Interested vendors/suppliers may obtain a copy of the drawing (73D011005) from the USA buyer (L. Williams) identified herein. Procurement Strategy: USA is responsible for the overall program management and integration of these technical requirements. USA will solicit the participation of qualified sources and sources desiring to participate on a limited basis will also be considered. USA reserves the right to issue a single/sole source subcontract. The period of performance and technical requirements are currently being defined for inclusion into a formal RFP package. USA anticipates the issuance of a formal Request for Proposal (RFP) within 30 days of release of this RFI. This RFI is for information and planning purposes, and the objective is: (1) to invite potential sources to submit information that allows USA to conduct a technical assessment of capabilities and qualifications, and (2) to promote a best value competition. This preliminary information does not constitute an RFP, Invitation for Bid, or Request for Quotation, and it is not to be construed as a commitment by USA to enter into a subcontract. This procurement is subject to review or cancellation at any time. Statement of Capabilities and Qualifications: USA invites potential sources to submit a Statement of Capabilities and Qualifications document that will allow USA to conduct an assessment of capabilities and qualifications. The Statement of Capabilities and Qualifications document shall be no more than five (5) pages (8.5? x 11?) in length. The required information shall include, but not be limited to: (1) A brief description of your company, including its size, major products, and primary customer focus, (2) A discussion of your company?s past experience and performance in developing/performing the requirements described herein, and (3) A brief description of your company?s facilities, assets and any other available resources. This document may be submitted either in hard copy and/or electronically. Past experience will be identified by a listing of all related contracts and subcontracts, along with a description of your company?s performance under these contracts and subcontracts. If any of these contracts and subcontracts are Government related, provide the Contracting Officer?s name and telephone number in order for USA to validate your statements. To be considered as a viable source, USA will evaluate the Statement of Capabilities and Qualifications by considering, but not limited to, the following criteria: (1) Depth and relevance of experience and past performance history, which convey a demonstrated technical, cost, schedule ability; (2) An understanding of the technical requirements and risks associated with this requirement; and (3) The adequacy and availability of necessary facilities and resources for implementing and performing the contractual work. USA reserves the right to request supplemental information in order to clarify your company?s capabilities and qualifications. Only offerors deemed to be best qualified, or have a reasonable chance for award, will receive the RFP. Due to the nature of the technical requirements, firms interested in participating in this procurement are subject to the requirements of the U.S. Department of State International Traffic and Arms Regulation (ITAR) and/or the U.S. Department of Commerce Export Administration Regulations (EAR). Firms interested in this procurement shall submit their Statement of Capabilities and Qualifications document no later than 02/25/2005 to the following address: United Space Alliance, LLC (USA), 8550 Astronaut Boulevard, Cape Canaveral, Florida 32920, Attention: Linda Williams, Mail Code USK-360. Questions regarding this procurement should be referred to Linda Williams as follows (Telephone: (321) 861-1160, Facsimile: (321) 861-5243, E:mail: Linda.c.williams@usa-spaceops.com).
- Web Link
-
Click here for the latest information about this notice
(http://prod.nais.nasa.gov/cgi-bin/eps/bizops.cgi?gr=D&pin=73#114280)
- Record
- SN00753223-W 20050218/050217080727 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |