SOLICITATION NOTICE
20 -- 20- Open, Inspect, and Report of Propeller Blade Sets
- Notice Date
- 3/23/2005
- Notice Type
- Solicitation Notice
- NAICS
- 811310
— Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
- Contracting Office
- DHS - Direct Reports, United States Coast Guard (USCG), Commanding Officer, USCG Engineering Logistics Center, 2401 Hawkins Point Road Building 31, Mail Stop 26, Baltimore, MD, 21226-5000
- ZIP Code
- 21226-5000
- Solicitation Number
- HSCG40-05-Q-6I002
- Response Due
- 4/22/2005
- Archive Date
- 5/7/2005
- Small Business Set-Aside
- Total Small Business
- Description
- . The U.S. Coast Guard Engineering Logistics Center has a requirement for open, inspect, and report of propeller blade sets in accordance with ELC Propeller Inspection Description dated 2/14/05 on the following: NSN 2010-01-133-7612- LH, P/N 715-WPG-4400-59, Serial Nos. 378BJP-92-LH-401, 402, 403, 404, 378-BJP-92-LH-501,502,503,504, QTY 2 SE and NSN 2010-01-139-1063, RH, P/N 715-WPG-4400-60RH, Serial Nos. 378BJP-92-RH-101, 102,103, 104, 378-BJP-92-RH-501,502,503,504, QTY 2 SE in accordance with USCG Drawing Nos. 378 FRAM W-245-11 REV. C dated 12/22/64 and 378 FRAM-W-245-12 REV. C dated 12/22/64, NSN 2010-12-193-4772, RH, P/N 8344711-00 CW, Serial Nos. 378-RH-96-002-B1,B2,B3,B4, QTY 1 SE in accordance with USCG Drawing No. 378 FRAM-W-245-014, REV. A dated 06/30/92, NSN 2010-01-120-2871-LH, P/N 8-350-255, Serial Nos. 270-LH-94-009,010,011,012, QTY 1 SE and NSN 2010-01-119-3972-RH, P/N 8-350-254, Serial Nos. 270-RH-94-17,18,19,20, 270WMEC-RH-022,023,024,025-89, 7452-85-RH-005,006,007,008, QTY 3 SE in accordance with USCG Drawing No. 901-WMEC-245-004, REV. E dated 08/11/92. The blade sets are to be used on the 270 FT WMEC & 378 FT WHEC Coast Guard Cutters. The blade sets are located at the USCG Engineering Logistics Center, 2401 Hawkins Point Road, Baltimore, MD 21226-5000. To facilitate balancing and dimensional inspection of pitch and track, the following government furnished property will be furnished : ACN 2040-01-F88-0015, Dummy Hub, LH & RH, QTY 1 EA, ACN 2010-01-F84-0006, Dummy Hub, LH & RH, QTY 1 EA and ACN 2010-01-FST-0069, Dummy Hub, LH & RH, QTY 1 EA. The inspection reports shall be delivered to the USCG Engineering Logistics Center, 2401 Hawkins Point Road, Baltimore, MD 21226-5000, M/S 25, Attn: Andrea Brehon. Delivery of the reports shall be required 45 to 180 calendar days after receipt of GFP. The blade sets shall be delivered FOB Destination to the USCG Engineering Logistics Center, Bldg. 88, 2401 Hawkins Point Road, Baltimore, MD 21226-5000. Delivery of the blade sets shall be thirty calendar days after final approval of inspection report. See Numbered Note 1. All responsible sources may submit a quotation, which will be considered by the agency.
- Record
- SN00773822-W 20050325/050323211548 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |