Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY ISSUE OF AUGUST 12, 2005 FBO #1355
SOLICITATION NOTICE

66 -- ELECTROCHEMICAL WORKSTATION WITH COMPONENTS

Notice Date
8/10/2005
 
Notice Type
Solicitation Notice
 
NAICS
335999 — All Other Miscellaneous Electrical Equipment and Component Manufacturing
 
Contracting Office
NASA/George C. Marshall Space Flight Center, Procurement Office, Marshall Space Flight Center, AL 35812
 
ZIP Code
35812
 
Solicitation Number
NNM05118737Q
 
Response Due
8/25/2005
 
Archive Date
8/10/2006
 
Description
NASA/MSFC has a requirement for Electrochemical Workstation with Components with the following minimum requirements: Electrochemical Workstation with Components Line Item 1: Electrochemical Workstation Extended consisting of a built-in, research grade potentiostat/galvanostat; 1nA to 2A FS, 2 channel FRA frequency response analyzer, frequency range of 10uHz to 3MHz, 4 slot mainframe expansion chassis. Includes Thales electrochemical software for DC and EIS techniques, input cables, manual, dummy cell, buffer amp. USB interface. Specification for an Impedance / Voltammetry Measurement System: The System shall be a tightly integrated, single instrument approach containing a digital correlation analyzer (generator and dual channel analyzer) and potentiostat/galvanostat. Software shall be included to perform a wide range of experiments such as: EIS acquisition, EIS fitting and modeling, Capacity v. Potential, Cyclic voltammetry, Linear Polarization, EC Noise, Time Domain Data Acquisition, and Automatic series measurements. Impedance data shall be able to be plotted vs. Frequency and other variables such as time, temperature, and voltage. The instrument shall have the option for measurements of external voltage and temperature inputs. A high impedance probe set for measuring GigaOhm impedances may be part of the system. An option shall exist via plug-in card or cable for external Potentiostat to provide high current operation to 100A should this be needed. Hardware Specifications: AC Generator and Analyzer: Frequency Range: 10uHz to 3MHz Resolution: 5000 steps/decade Sweeps: Logarithmic/linear, up/down Amplitude: 1mV to 1V full scale Generator Phase accuracy: +-0.2deg. @ 10uHz to 100KHz +-1.0deg. @ 100KHz to 2MHz +-3.0deg. @ 2MHz to 8MHz Analyzer input channels: 2 Potentiostat / Galvanostat General: Input configuration: 4 terminal, true differential voltage inputs Electrometer: Internal, driven shield IR Compensation: Positive Feedback, range: 0-10Mohms, resol: 0.012% Potentiostat Operation Compliance Voltage: +-14V standard, (+-120V option ) Output Current: 2A Potential Ranges: +-1V, +-2V, +-4V, +-10V Resolution: 16000 steps / range Galvanostat Operation: Current ranges: 100nA to 2 A in 24 steps Min. resolution: 0.025% Accuracy: 0.1% @ >2uA to 200mA 1.0% @ <2uA or > 200mA Time Domain Measurements ( optional ) Voltage Channels: 2 Temperature Channels: 2 Physical: General: Single instrument Option slots: 1 Dimensions: 16 x 36 x 38 cm. ( H, W, D ) Weight: 12 kg Line Item 2: Control Module for up to 4 external potentiostats or loads, 1 Slot plug-in Line Item 3: High Impedance Probe Set; Current Range: 1A to 1nA, Current Resolution: +-125fA; Input Impedance: 10^15ohhm, Freq. Range: DC to 1MHz. Line Item 4: Low Impedance Cable Set Line Item 5: Temperature and Voltage Data Acquisition Module, 1 slot plug-in. 2 voltage inputs: +-4V(std), +-10V, +-2V, 2 Type K thermocouple inputs with switch selectable cold junction compensation. Line Item 6: Power Potentiostat, +-10V, +-20A, 10uHz to 100KHz, 200W output power. This notice is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation, which is issued as a Request for Quotation (RFQ); quotes are being requested and a written solicitation will not be issued. Offerors are required to use the On-Line RFQ system to submit their quote. The On-line RFQ system is linked above or it may be accessed at http://prod.nais.nasa.gov/cgi-bin/eps/bizops.cgi?gr=C&pin= . The information required by FAR Subpart 12.6 is included in the on-line RFQ. The Government intends to acquire a commercial item using FAR Part 12 and the Simplified Acquisition Procedures set forth in FAR Part 13. Questions regarding this acquisition must be submitted in writing (e-mail is preferred) no later than 08/18/05, 5 pm CST. It is the quoter's responsibility to monitor this site for the release of amendments (if any). Potential quoters will be responsible for downloading their own copy of this notice, the on-line RFQ and amendments (if any). An ombudsman has been appointed - See NASA Specific Note "B". Any referenced notes may be viewed at the following URLs link below.
 
Web Link
Click here for the latest information about this notice
(http://prod.nais.nasa.gov/cgi-bin/eps/bizops.cgi?gr=D&pin=62#116958)
 
Record
SN00867635-W 20050812/050810213038 (fbodaily.com)
 
Source
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.