SOLICITATION NOTICE
80 -- Paints MIL-Spec Testing
- Notice Date
- 8/22/2005
- Notice Type
- Solicitation Notice
- NAICS
- 541380
— Testing Laboratories
- Contracting Office
- Department of the Navy, Naval Supply Systems Command, Fleet and Industrial Supply Center Jacksonville, 110 Yorktown Ave 3rd Floor, Code 200, Jacksonville, FL, 32212-0097
- ZIP Code
- 32212-0097
- Solicitation Number
- N68836-05-R-0035
- Response Due
- 9/13/2005
- Archive Date
- 9/28/2005
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6 FAR Part 13.5 and supplemented with additional information included in this notice. This announcement constitutes the only solicitation; a Request for Proposal is hereby issue and a written solicitation will not be issued. The Solicitation/RFQ Number is N68838-05-R-0035 and closes on 13 September 2005. This procurement is Set-Aside for Small Business. The RFP and incorporated clauses and provisions are those in full affect through FAC 2005-04 and class deviation DFAR Change Notice 2005-0621. The North American Industry Classification System (NAICS) Code is 541380 and business size standard is 10.0 Million. The Fleet Industrial Supply Center- Jacksonville, FL is announcing the requirement for the following per the attached schedule. All test to be performed at the contractor facility. CLIN DESCRIPTION QTY UNIT COST TOTAL COST 0001 BASE YEAR - LABORATORY ANALYSIS (RECEIPT INSPECTION REQUIREMENTS) TO ENSURE PAINT MEETS THE MIL-SPEC REQUIREMENTS AND PARAMETER VALUES OF THE MANUFACTURER?S PRODUCT DATA SHEETS (ASTM F718) FOR TEST SPECIFIED IN NOTE 9 OF TABLE 631-11-1 OF NSTM CHAPTER 631) 0001AA DURA PLATE UHS PRIMER, GOLD PART A & B (B62H210 & B62V210) MIL PRF 23236 5 0001AB DURA PLATE UHS TOP COAT, WHITE, PART A & B (B62H210 & B62V210) MIL PRF 23236 5 0001AC DURA PLATE UHS STRIPE COAT PART A & B (B62W210 & B62V210 TINTED GRAY) MIL PRF 23236 5 0001AD NOVA PLATE PRIMER, BUFF, PART A & B (B62W220 & B62V220) MIL PRF 23236 5 0001AE NOVA PLATE STRIPE COAT LT GREY, PART A & B (B62A220 & B62V220) MIL PRF 23236 5 0001AF NOVA PLATE TOP COAT WHITE, PART A & B (B62W220 & B62V220) MIL PRF 23236 5 0001AG FAST CLAD ER HIGH SOLIDS BASE AND CATALYST 1 TO 1 RATIO (BASE WHITE B62W230, CATALYST GREEN B62G230, GREY B62A230, CLEAR B62V230) MIL PRF 23236 5 0001AH FAST CLAD ER HIGH SOLIDS BRUSH GRADE BASE AND CATALYST 1 TO 1 RATIO (BASE WHITE B62W240, CATALYST GREEN B62G240, GREY B62A240 & CLEAR B62V240) MIL PRF 23236 5 0001AJ PAINT ABLATIVE COATING RED P30RQ10 1 PART 5 0001AK PAINT ABLATIVE COATING BLACK P30AP1085 (P30BQ12) 1 PART MIL PRF 24647 5 0001AL ANTICORROSIVE EPOXY RED PART A & B (P23RQ82 & P23VQ80) MIL PRF 24647 5 0001AM ANTICORROSIVE EPOXY LT GREY PART A & B (P23AQ81 & P23VQ80) MIL PRF 24647 5 0001AN 20A EPOXY GREEN F150 TYP III (PART A N10G350 PART B N10V350) 21A EPOXY HAZE GREY FORMULA 151 TYP III (PART A 10A351 PART B N10V351) MIL DTL 24441/20A &21A 9 0001AP 22A EPOXY WHITE F152 TYP III (PART A N10W352 PART B N10V351) 23A EPOXY DRK GREY FORMULA 153 TYP III (PART A N10A353 PART B N10V351) MIL DTL 24441/22A & 23A 9 0001AQ 29A EPOXY GREEN F150 TYP IV (PART A N10G450 PART B N10V451) 30A EPOXY HAZE GREY F 151 TYP IV (PART A N10A451, PART B N10V451) MIL DTL 24441/29A & 30A 9 0001AR 31A EPOXY WHITE F 152 TYP IV (PART A N10W452 PART B N10V451) 32 A EPOXY DARK GREY F153 TYP IV (PART A N10A453, PART B N10V451) MIL DTL 24441/31A & 32A 9 0001AS 26A EPOXY RED F156 TYP III (PART A N10R356 PART B N10V356) MIL DTL 24441/26A 5 0002 OPTION YEAR ONE - LABORATORY ANALYSIS (RECEIPT INSPECTION REQUIREMENTS) TO ENSURE PAINT MEETS THE MIL-SPEC REQUIREMENTS AND PARAMETER VALUES OF THE MANUFACTURER?S PRODUCT DATA SHEETS (ASTM F718) FOR TEST SPECIFIED IN NOTE 9 OF TABLE 631-11-1 OF NSTM CHAPTER 631) 0002AA DURA PLATE UHS PRIMER, GOLD PART A & B (B62H210 & B62V210) MIL PRF 23236 5 0002AB DURA PLATE UHS TOP COAT, WHITE, PART A & B (B62H210 & B62V210) MIL PRF 23236 5 0002AC DURA PLATE UHS STRIPE COAT PART A & B (B62W210 & B62V210 TINTED GRAY) MIL PRF 23236 5 0002AD NOVA PLATE PRIMER, BUFF, PART A & B (B62W220 & B62V220) MIL PRF 23236 5 0002AE NOVA PLATE STRIPE COAT LT GREY, PART A & B (B62A220 & B62V220) MIL PRF 23236 5 0002AF NOVA PLATE TOP COAT WHITE, PART A & B (B62W220 & B62V220) MIL PRF 23236 5 0002AG FAST CLAD ER HIGH SOLIDS BASE AND CATALYST 1 TO 1 RATIO (BASE WHITE B62W230, CATALYST GREEN B62G230, GREY B62A230, CLEAR B62V230) MIL PRF 23236 5 0002AH FAST CLAD ER HIGH SOLIDS BRUSH GRADE BASE AND CATALYST 1 TO 1 RATIO (BASE WHITE B62W240, CATALYST GREEN B62G240, GREY B62A240 & CLEAR B62V240) MIL PRF 23236 5 0002AJ PAINT ABLATIVE COATING RED P30RQ10 1 PART 5 0002AK PAINT ABLATIVE COATING BLACK P30AP1085 (P30BQ12) 1 PART MIL PRF 24647 5 0002AL ANTICORROSIVE EPOXY RED PART A & B (P23RQ82 & P23VQ80) MIL PRF 24647 5 0002AM ANTICORROSIVE EPOXY LT GREY PART A & B (P23AQ81 & P23VQ80) MIL PRF 24647 5 0002AN 20A EPOXY GREEN F150 TYP III (PART A N10G350 PART B N10V350) 21A EPOXY HAZE GREY FORMULA 151 TYP III (PART A 10A351 PART B N10V351) MIL DTL 24441/20A &21A 9 0002AP 22A EPOXY WHITE F152 TYP III (PART A N10W352 PART B N10V351) 23A EPOXY DRK GREY FORMULA 153 TYP III (PART A N10A353 PART B N10V351) MIL DTL 24441/22A & 23A 9 0002AQ 29A EPOXY GREEN F150 TYP IV (PART A N10G450 PART B N10V451) 30A EPOXY HAZE GREY F 151 TYP IV (PART A N10A451, PART B N10V451) MIL DTL 24441/29A & 30A 9 0002AR 31A EPOXY WHITE F 152 TYP IV (PART A N10W452 PART B N10V451) 32 A EPOXY DARK GREY F153 TYP IV (PART A N10A453, PART B N10V451) MIL DTL 24441/31A & 32A 9 0002AS 26A EPOXY RED F156 TYP III (PART A N10R356 PART B N10V356) MIL DTL 24441/26A 5 0003 OPTION YEAR TWO - LABORATORY ANALYSIS (RECEIPT INSPECTION REQUIREMENTS) TO ENSURE PAINT MEETS THE MIL-SPEC REQUIREMENTS AND PARAMETER VALUES OF THE MANUFACTURER?S PRODUCT DATA SHEETS (ASTM F718) FOR TEST SPECIFIED IN NOTE 9 OF TABLE 631-11-1 OF NSTM CHAPTER 631) 0003AA DURA PLATE UHS PRIMER, GOLD PART A & B (B62H210 & B62V210) MIL PRF 23236 5 0003AB DURA PLATE UHS TOP COAT, WHITE, PART A & B (B62H210 & B62V210) MIL PRF 23236 5 0003AC DURA PLATE UHS STRIPE COAT PART A & B (B62W210 & B62V210 TINTED GRAY) MIL PRF 23236 5 0003AD NOVA PLATE PRIMER, BUFF, PART A & B (B62W220 & B62V220) MIL PRF 23236 5 0003AE NOVA PLATE STRIPE COAT LT GREY, PART A & B (B62A220 & B62V220) MIL PRF 23236 5 0003AF NOVA PLATE TOP COAT WHITE, PART A & B (B62W220 & B62V220) MIL PRF 23236 5 0003AG FAST CLAD ER HIGH SOLIDS BASE AND CATALYST 1 TO 1 RATIO (BASE WHITE B62W230, CATALYST GREEN B62G230, GREY B62A230, CLEAR B62V230) MIL PRF 23236 5 0003AH FAST CLAD ER HIGH SOLIDS BRUSH GRADE BASE AND CATALYST 1 TO 1 RATIO (BASE WHITE B62W240, CATALYST GREEN B62G240, GREY B62A240 & CLEAR B62V240) MIL PRF 23236 5 0003AJ PAINT ABLATIVE COATING RED P30RQ10 1 PART 5 0003AK PAINT ABLATIVE COATING BLACK P30AP1085 (P30BQ12) 1 PART MIL PRF 24647 5 0003AL ANTICORROSIVE EPOXY RED PART A & B (P23RQ82 & P23VQ80) MIL PRF 24647 5 0003AM ANTICORROSIVE EPOXY LT GREY PART A & B (P23AQ81 & P23VQ80) MIL PRF 24647 5 0003AN 20A EPOXY GREEN F150 TYP III (PART A N10G350 PART B N10V350) 21A EPOXY HAZE GREY FORMULA 151 TYP III (PART A 10A351 PART B N10V351) MIL DTL 24441/20A &21A 9 0003AP 22A EPOXY WHITE F152 TYP III (PART A N10W352 PART B N10V351) 23A EPOXY DRK GREY FORMULA 153 TYP III (PART A N10A353 PART B N10V351) MIL DTL 24441/22A & 23A 9 0003AQ 29A EPOXY GREEN F150 TYP IV (PART A N10G450 PART B N10V451) 30A EPOXY HAZE GREY F 151 TYP IV (PART A N10A451, PART B N10V451) MIL DTL 24441/29A & 30A 9 0003AR 31A EPOXY WHITE F 152 TYP IV (PART A N10W452 PART B N10V451) 32 A EPOXY DARK GREY F153 TYP IV (PART A N10A453, PART B N10V451) MIL DTL 24441/31A & 32A 9 0003AS 26A EPOXY RED F156 TYP III (PART A N10R356 PART B N10V356) MIL DTL 24441/26A 5 0004 OPTION YEAR THREE - LABORATORY ANALYSIS (RECEIPT INSPECTION REQUIREMENTS) TO ENSURE PAINT MEETS THE MIL-SPEC REQUIREMENTS AND PARAMETER VALUES OF THE MANUFACTURER?S PRODUCT DATA SHEETS (ASTM F718) FOR TEST SPECIFIED IN NOTE 9 OF TABLE 631-11-1 OF NSTM CHAPTER 631) 0004AA DURA PLATE UHS PRIMER, GOLD PART A & B (B62H210 & B62V210) MIL PRF 23236 5 0004AB DURA PLATE UHS TOP COAT, WHITE, PART A & B (B62H210 & B62V210) MIL PRF 23236 5 0004AC DURA PLATE UHS STRIPE COAT PART A & B (B62W210 & B62V210 TINTED GRAY) MIL PRF 23236 5 0004AD NOVA PLATE PRIMER, BUFF, PART A & B (B62W220 & B62V220) MIL PRF 23236 5 0004AE NOVA PLATE STRIPE COAT LT GREY, PART A & B (B62A220 & B62V220) MIL PRF 23236 5 0004AF NOVA PLATE TOP COAT WHITE, PART A & B (B62W220 & B62V220) MIL PRF 23236 5 0004AG FAST CLAD ER HIGH SOLIDS BASE AND CATALYST 1 TO 1 RATIO (BASE WHITE B62W230, CATALYST GREEN B62G230, GREY B62A230, CLEAR B62V230) MIL PRF 23236 5 0004AH FAST CLAD ER HIGH SOLIDS BRUSH GRADE BASE AND CATALYST 1 TO 1 RATIO (BASE WHITE B62W240, CATALYST GREEN B62G240, GREY B62A240 & CLEAR B62V240) MIL PRF 23236 5 0004AJ PAINT ABLATIVE COATING RED P30RQ10 1 PART 5 0004AK PAINT ABLATIVE COATING BLACK P30AP1085 (P30BQ12) 1 PART MIL PRF 24647 5 0004AL ANTICORROSIVE EPOXY RED PART A & B (P23RQ82 & P23VQ80) MIL PRF 24647 5 0004AM ANTICORROSIVE EPOXY LT GREY PART A & B (P23AQ81 & P23VQ80) MIL PRF 24647 5 0004AN 20A EPOXY GREEN F150 TYP III (PART A N10G350 PART B N10V350) 21A EPOXY HAZE GREY FORMULA 151 TYP III (PART A 10A351 PART B N10V351) MIL DTL 24441/20A &21A 9 0004AP 22A EPOXY WHITE F152 TYP III (PART A N10W352 PART B N10V351) 23A EPOXY DRK GREY FORMULA 153 TYP III (PART A N10A353 PART B N10V351) MIL DTL 24441/22A & 23A 9 0004AQ 29A EPOXY GREEN F150 TYP IV (PART A N10G450 PART B N10V451) 30A EPOXY HAZE GREY F 151 TYP IV (PART A N10A451, PART B N10V451) MIL DTL 24441/29A & 30A 9 0004AR 31A EPOXY WHITE F 152 TYP IV (PART A N10W452 PART B N10V451) 32 A EPOXY DARK GREY F153 TYP IV (PART A N10A453, PART B N10V451) MIL DTL 24441/31A & 32A 9 STATEMENT OF WORK Conduct laboratory analysis (Receipt Inspection Requirements) to ensure paint meets the Mil-Spec requirements and parameter values of the manufacture's product data sheets (ASTM F718) for the test specified in note 9 to Table 631-11-1 of NSTM Chapter 631. Receipt inspection requirements shall include Test and Inspection Record and Inspection of Storage and Receipt Inspection Facilities. The Quality Control Parameters shall include as follows: *Density (weight per gallon) *Consistency (viscosity) *Dry hard time (73 degrees) *Sag resistance *Fineness of grind *Appearance of dry file *Color of dry film *Condition in container Paint to be picked up and delivered by Sherwin Williams Company. Forward certified copies of all lab analysis to the following 1. TRIDENT Refit Facility Code 413 Attn Ernest Schwach 990 USS Thomas Jefferson Drive Kings Bay Ga 31547 Email: Ernest_Schwach@trfkb.navy.mil Phone: 912-573-9863 Fax: 912-573-2394 2. The Sherwin Williams Company 461 Charlie Smith SR Highway St. Marys Ga 31558 3. One copy of the report shall be included with the paint shipment 4. Turn around time for paint testing must be within 5 to 7 days. IMPORTANT NOTICE: DFARS 252-204-7004 Alt A Central Contractor Registration (CCR) is required and applies to all solicitations issued on/after 6-1-98. Lack of registration in the CCR database will make an offeror ineligible for award of a contract/purchase order. Please ensure compliance with this regulation when submitting your quote. Utilize the CCR website at http://www.ccr.gov and/or call the CCR Assistance Center at 888-227-2423 for more information. THE FOLLOWING PROVISIONS AND CLAUSES ARE APPLICABLE AND ARE HEREBY INCORPORATED INTO THE SOLICITATION BY REFERENCE AND BY FULL TEXT. THE FULL TEXT OF THE CLAUSES /PROVISIONS FROM THE FAR AND DFARS CAN BE ACCESSED VIA THE INTERNET USING THE FOLLOWING WEBSITE ADDRESS: http://www.arnet.gov/far/ or http://farsite.hill.af.mil/vffar1.htm FAR 52.212-1, Instructions to Offeror Commercial Items, NOTE: This provision must be reviewed completely. It contains the guidelines for submission of your quotation. Addendum to FAR 52.212-1: FAR 52.212-5 Facsimile Proposals, ? Fax: 904-542-1098, FAR 52.212-2 Evaluation of Commercial Items; (a) The Government will award a Firm-Fixed Price purchase order resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous and considered the Best Value to the Government. Price and Past Performance factors will be considered in evaluating the quotation with pricing being the most important. Ability to meet the requirements set forth in this RFQ shall be demonstrated by the contractor?s submission of a signed quotation, which hasn?t taken exception to the schedule. Quotations that take exception and do not meet the Government?s requirements, may be determined to be unacceptable and not considered for award. Offer shall, therefore, contain the contractor?s best terms from a technical, delivery, and pricing standpoint. FAR 52.212-3, Offeror Representation and Certifications-Commercial Items- (JAN2005); Incorporated by full text; NOTE: This provision is considered a fill-in. All applicable field must be completed. Submit this provision with your quotation. FAR 52.212-4 Contract Terms and Conditions Commercial Items; Addendum to FAR 52.212-4 are herby incorporated by reference or full text as applicable, FAR 52.212-5 Contract Terms and Conditions Required to Implement Statues or Executive Orders-Commercial Items (Deviation) applies with following applicable clauses for paragraph (b): FAR 219-14 Limitations on Subcontracting; FAR 222-21 Prohibition on Segregated Facilities, FAR 52.222-26 Equal Opportunity, FAR 52.222-35 Affirmative Action for Special Disabled and Vietnam Era Veterans, FAR 52.222-36 Affirmative Action for Handicapped Workers, FAR 52.222-37, Employment Reports on Special Disabled Veterans and Veterans of the Vietnam Era, 52.232-33 Payment by Electronic Funds Transfer-Central Contractor Registration; DFAR 252.212-7001 Contract Terms and conditions required to implement statutes or executive orders applicable to defense acquisitions of commercial items-May 2002, 252.204-7004 ALT A Required Central Contractor Registration; DFAR 225-7007 Trade Agreements-Balance of Payments Program, DFARS 252.225-7012 Preference for Certain Domestic Commodities, End of Clauses/Provisions. PROPOSALS SHALL INCLUDE: (1) letter signed by an individual authorized to bind the organization, with a schedule of offered items per the scheduled included in this synopsis. Offerors who do not submit clear specification will be eliminated from competition. (2) Completed Representations and Certifications, and (3) acknowledgement of any amendments that may be issued. Any amendments that may be issued will be published in the FedBizOps, the same as the combined synopsis/solicitation. Proposal information may be submitted electronically via e-mail or fax. Submit quotations to: Fleet and Industrial Supply Center, Jacksonville, ATT: Reggie Taylor, Code 240RT Phone 904-542-1246 or fax 904-542-1098. Address all questions or inquires to the Contracting Officer at 904-542-1246 or email: Reginald.d.taylor@navy.mil. Solicitation number: RFP N68836-05-R-0035 on all documents and requests for information. Proposals must be received no later than 4:00 p.m. (EST) on 13 September 2005.
- Place of Performance
- Address: Trident Refit Facility, 990 USS Thomas Jefferson Drive, Kings Bay, GA
- Zip Code: 31547
- Zip Code: 31547
- Record
- SN00876326-W 20050824/050822212533 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |