Loren Data's SAM Daily™

FBO DAILY ISSUE OF OCTOBER 26, 2005 FBO #1430
SOLICITATION NOTICE

49 -- TIRE BEAD BREAKER

Notice Date

10/24/2005
 

Notice Type

Solicitation Notice
 

NAICS

336412 — Aircraft Engine and Engine Parts Manufacturing
 

Contracting Office

General Services Administration, Federal Supply Service (FSS), Southwest Supply Center (7FL), 819 Taylor Street RM 6A06, Fort Worth, TX, 76102
 

ZIP Code

76102
 

Solicitation Number

Reference-Number-7FLA-D9-4940-1
 

Response Due

11/3/2005
 

Archive Date

11/18/2005
 

Small Business Set-Aside

Total Small Business
 

Description

Universal Aircraft Tire Bead Breaker Bead Breaker is specifically designed to break narrow and wide body aircraft tire beads without changing heavy adapter rings. This adjustable design approach removes the need for individual adapters for each wheel that is supported. It also allows the equipment operator to choose the optimum diameter around the outer portion of the wheel halves for any tire size by simply adjusting the four (4) adjustable Spider Segments on each side mounted Pressure Plate to the desired wheel/tire diameter. The four Segments are evenly spaced to provide equal pressure around the entire tire bead diameter. The height of the bead breaker's spindle arms may be adjusted to accommodate nearly any height wheel assembly with a single adjustment to the hydraulic elevation system. The elevating hydraulic cylinders at the base of the unit raise and lower the Spider Segment plates to the appropriate wheel height. There are two of them, one on each side of the unit to ensure a level adjustment of the height of the bead breaking Spiders. The control for this function is conveniently placed on the control box at the operator station in the right, front side of the unit. Standard Features Include: (2) Two Hydraulic Cylinders with 60,000 LB Capacity ?nElectric Powered Pumping Unit ?nFrame Hydraulically Elevates To Wheel Size (No Lifting of Heavy Wheel Assemblies) ?nAdjustable Spider Segments (No Lifting of Heavy Adapter Rings) ?nSpider Segment Adjustment Tool ?nSkydrol Resistant Paint Bead Breaking Pressure Between (2) Hydraulic Cylinders: 60,000 LBS Hydraulic Pump Motor Voltage: 220/440 VAC (customer specified) Phase: 3 PH Frequency: 50/60 HZ (customer specified) Electrical Requirements Voltage: 220/440 VAC (customer specified) Phase: 3 PH Frequency: 50/60 HZ (customer specified)
 

Place of Performance

Address: GSA FSS WDC EXPORT, FOR APPOINTMENTS CALL 209-547-8699, 700 E ROTH RD BLDG 386 RT ST 305H, FRENCH CAMP CA 95231

Zip Code: 95231

Country: U.S.
 

Record

SN00920189-W 20051026/051024212057 (fbodaily.com)
 

Source

FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |