SOLICITATION NOTICE
J -- Rewind of Blakely Mountain Powerhouse Generators
- Notice Date
- 3/1/2006
- Notice Type
- Solicitation Notice
- NAICS
- 811310
— Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
- Contracting Office
- US Army Engineer District, Vicksburg, ATTN: CEMVK-CT, 4155 Clay Street, Vicksburg, MS 39183-3435
- ZIP Code
- 39183-3435
- Solicitation Number
- W912EE-06-R-0013
- Response Due
- 4/17/2006
- Archive Date
- 6/16/2006
- Small Business Set-Aside
- N/A
- Description
- USACE, Vicksburg District, has a requirement to provide labor, materials, and equipment necessary to rewind generators of Units 1 and 2 at Blakely Mountain Powerplant. Work for Unit 2 may or may not be done and therefore is to be considered optional. The work will include, but is not limited to the following: (1) Design, manufacture, shop test, prepare and load for shipment, deliver f.o.b. destination, and unload one complete set of stator coils and all accessories specified herein, (2)Disassemble and remove one generator unit, including the exciter equipment, air housing, upper bracket, and rotor and dispose of pilot exciter, (3) Remove old stator coils and stator core, (4) Design, manufacture, shop test, prepare and load for shipment, deliver f.o.b. destination, and unload one complete set of stator laminations and vent duct spacers and all accessories specified herein, (5) Restack and test one stator core, (6) Install and test one new stator windings and accessories specified herein, (7) Inspect, cle an, and test one generator rotor, (8) (OPTIONAL) Remove, prepare and load for shipment to the factory, clean, re-insulate, re-install and test all rotor poles and all accessories specified herein, (9) Turn and undercut the commutator and slip rings, (10) F urnish spare parts, (11) Reassemble generator, (12) Furnish manufacturers representative on-site services to supervise the installation of the generator stator coils and to perform start-up, commissioning, and testing of one generator, (13) Perform all wo rk required to comply with the site operations, environmental protection, and safety and health provisions as specified herein, (14) Perform all work required for painting, miscellaneous welding, machinist, electrician and other skilled craftsman hire,(15) Perform calculations, design, manufacture, and modify existing joint in rotor spider arms, (16) Perform calculations, design, manufacture, and modify existing and/or install additional dowels between stator frame and stator sole plate, (17) Perform calcul ations and inspections to verify adequacy of existing stator sole plate anchorage and/or bracket, and (18) (OPTIONAL) Design, manufacture, remove existing (if necessary), and install, modify, or repair stator sole plate anchorage and/or bracket. Specificat ions will be available on the Federal Technical Data Solutions (FEDTEDS) Web Page at http://www.fedteds.gov/. Hardcopies will not be available. Offerors should check the FEDTEDS Web Page often for new solicitations and/or changes (AMENDMENTS) to existing ones. Issue date on or about 17 March 2006. Offer due date on or about 17 April 2006, 1645 Hours. THIS PROCUREM ENT IS UNRESTRICTED AND ISSUED UNDER NAICS CODE 811310 FOR A FIRM FIXED PRICE CONTRACT.
- Place of Performance
- Address: US Army Engineer District, Vicksburg ATTN: CEMVK-CT, 4155 Clay Street Vicksburg MS
- Zip Code: 39183-3435
- Country: US
- Zip Code: 39183-3435
- Record
- SN00997127-W 20060303/060301212712 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |