SOLICITATION NOTICE
66 -- Navigational Instruments
- Notice Date
- 9/12/2006
- Notice Type
- Solicitation Notice
- Contracting Office
- N68936 Naval Air Warfare Center Weapons Division Dept. 3 575 I Ave, Suite 1 Point Mugu, CA
- ZIP Code
- 00000
- Solicitation Number
- N6893606T0355
- Response Due
- 9/18/2006
- Archive Date
- 10/18/2006
- Description
- Ref: PR 10186507. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Federal Acquisition Regulations (FAR) Subpart 12.6, as supplemented with additional informatin included in this notice and using the Simplified Acquisition Procedures in FAR Part 13.5. This announcement constitutes the only solicitation; proposals are being requested, however a separate written solicitation will not be issued. The Contracts Department at Naval Air Warfare Center Weapons Division (NAWCWD), Point Mugu, CA, has a requirement to purchase 25 each, Nano Inertial Measure Units, manufactured by MEMSense LLC, Rapid City, SD, P/N NA02-0300F050C, or equal. The unit is a three-axis magnetometer, accelerometer, and rate gyro with a digital data stream output. Brand name or equal specifications are required because current software and hardware design is engineered to interface specifically with this unit. Any change in the digital data stream, the characteristics of the sensor, or form factor will require additional costs to be incurred to reengineer the target autopilot. Critical specifications are as follows: Measures 3D acceleration, 3D rate of turn and 3D magnetic field data; Output data via I2C or SPI interface; Operating Voltage 5.4VDC to 9VDC; Operating Temperature: -40 to +85C; Angular Rate measurement: 300degrees/second; Angular Offset: +/-1 degree; Angular Cross-Axis Sensitivity +/-1 degree; Acceleration: 2G Acceleration noise: 5 mG; Magnetic Field Dynamic Range: +-1.9 gauss; Magnetic Field Drift: 2700 ppm/C; Magnetic Field Sensitivity: 0.000087 gauss/bit; Power consumption: < 150mA; Accelerometer, Gyro and Magnetometer are temperature compensated and calibrated; Dimensions: L= <1.832 in, W = < 0.9 in, H = < 0.546 in. If offering an "equal" product be sure to include supportive literature/specifications with your offer. Offeror is responsible for completing and including with bid the following FAR fill-in clause: 52.212-3 Alt I Representations and Certifications - Commercial Items. The following additional FAR clauses are applicable, but may not be limited to: Any questions resulting from this solicitation must be emailed and received no later than 1 week prior to the closing date; the closing date is 9/6/06. Offers and completed FAR clauses must be emailed to barbara.contreras@navy.mil. All responsible sources may submit a quotation which will be considered by the agency. NAICS Code =334511 Place of Performance = N/A Set Aside = Total Small Business
- Record
- SN01141211-W 20060914/060912221420 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |