Loren Data's SAM Daily™

FBO DAILY ISSUE OF APRIL 22, 2007 FBO #1973
SOLICITATION NOTICE

65 -- SYNTHES IMPLANTS

Notice Date

4/20/2007
 

Notice Type

Solicitation Notice
 

NAICS

339113 — Surgical Appliance and Supplies Manufacturing
 

Contracting Office

Department of the Navy, Bureau of Medicine and Surgery, NH Okinawa, U. S. Naval Hospital Okinawa, Material Mgmt Dept PSC 482, Box 248, FPO, AP, 96362, UNITED STATES
 

ZIP Code

00000
 

Solicitation Number

Reference-Number-N684707110DFBA01
 

Response Due

5/2/2007
 

Archive Date

5/17/2007
 

Description

This is a combined synopsis/solicitation prepared in accordance with FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are not being requested and a written solicitation will not be issued. The following provisions and clauses apply plus any addenda: FAR 52.212-1 Instructions to Offerors - Commercial Items; 52.212-2 Evaluation - Commercial Items; 52.212-3 Offeror Representations and Certifications --Commercial Items; 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders- Commercial Items and 52.212-4 Contract Terms and Conditions - Commercial Items. NAICS Code for this requirement is 339113. The U.S. Naval Hospital, Okinawa, Japan intends to negotiate a sole-source contract with SYNTHES for various surgical implants. However, any firm that believes it can meet the requirements may give written notification to the Point of Contact (POC). Offerors responding to this notice must be FDA approved for the manufacture, sale and distribution of these Synthes products. Offerors must be authorized distributors of Synthes products. Contractor must be registered in Central Contractor Registration. [Note: Lack of registration in the Central Contractor Registration will make a Contractor ineligible for award] Registration is available via the Internet at www.ccr.gov. Shipping shall be direct to U.S. Naval Hospital, Okinawa, Japan. The requirements includes: 'SCREW SELF-TAPING TI 4.0 X 14M, SYNTHES, 487.044, 12EA; 'RODS TI LOW PROFILE TRANSCONNE, SYNTHES, 497.799, 2EA; 'TI LOW P TRANSCONNECTOR 42MM, SYNTHES, 497.798, 2EA; 'CORTEX BONE SCREW / SMALL-TITA, SYNTHES, 404.010, 5EA; 'CORTEX BONE SCREW / SMALL-TITA, SYNTHES, 404.016, 5EA; 'CORTEX BONE SCREW / SMALL-TITA, SYNTHES, 404.022, 5EA; 'SCREW CANCELLOUS 6.5MM HEX HEA, SYNTHES, 217.095, 5EA; 'SCREW CANCELLOUS 6.5MM HEX HEA, SYNTHES, 217.080, 5EA; 'SCREW CANCELLOUS 6.5MM HEX HEA, SYNTHES, 217.065, 5EA; 'DRILL BIT 2.0MM QUICK COUPLING, SYNTHES, '310.19, 2EA; 'WASHER 13MM, SYNTHES, '219.99, 10EA; 'SCREW BONE CANCELLOUS 6.5MM X, SYNTHES, '217.045, 5EA; 'SCREW BONE CANCELLOUS 6.5MM X, SYNTHES, '217.085, 5EA; 'SCREW BONE CANCELLOUS 6.5MM X, SYNTHES, '217.110, 5EA; 'SCREW BONE CANCELLOUS 6.5MM X, SYNTHES, '218.030, 5EA; 'CANCELLOUS SCREW 6.5MM 50MM, SYNTHES, '217.050, 5EA; 'CANCELLOUS SCREW 6.5MM 55MM, SYNTHES, '217.055, 5EA; 'CANCELLOUS SCREW 6.5MM 60MM, SYNTHES, '217.060, 5EA; 'CANCELLOUS SCREW 6.5MM 105MM, SYNTHES, '217.105, 5EA; 'CANCELLOUS SCREW 6.5MM 40MM F/, SYNTHES, '218.040, 5EA; '4.5MM/3.2MM DOUBLE DRILL SLEEV, SYNTHES, '312.46, 1EA; '6.5MM CANCELLOUS SCREW, 70MM, SYNTHES, '217.070, 5EA; '3.5MM CORTEX SCREW 14MM SELF-T, SYNTHES, '204.814, 4EA; '3.5MM CORTEX SCREW 16MM SELF-T, SYNTHES, '204.816, 4EA; 'CORTEX SCREW 2.7M 26M SELF TAP, SYNTHES,'202.826, 6EA; '3.5MM LOCK SCREW SLF-TPNG 22MM, SYNTHES, '212.107, 7EA; '3.5MM LOCK SCREW SLF-TPNG 32MM, SYNTHES, '212.112, 5EA; '3.5MM LOCK SCREW SLF-TPNG 34MM, SYNTHES, '212.113, 6EA; '3.5MM LOCK SCREW SLF-TPNG 36MM, SYNTHES, '212.115, 5EA; '3.5MM LOCK SCREW SLF-TPNG 38MM, SYNTHES', 212.116, 6EA; '3.5MM LOCK SCREW SLF-TPNG 16MM, SYNTHES, '212.104, 4EA; 3.5MM LOCK SCREW SLF-TPNG 20MM, SYNTHES, '212.106, 7EA; '3.5MM LOCK SCREW SLF-TPNG 24MM, SYNTHES, '212.108, 6EA; '3.5MM LOCK SCREW SLF-TPNG 28MM, SYNTHES, '212.110, 5EA; 3.5MM LCP PLATE 8 HOLES 111MM, SYNTHES, '223.581, 3EA; '3.5MM LCP PLATE 12 HOLES 163MM, SYNTHES, '223.621, 3EA; '3.5MM LOCK SCREW SLF-TPNG 40MM, SYNTHES, '212.117, 5EA; '3.5MM LOCK SCREW SLF-TPNG 45MM, SYNTHES, '212.119, 6EA; '4.0MM TI CANC SCREW S-TAP 12MM, SYNTHES, '450.134, 12EA; '6.0MM TI SOFT ROD 100MM ST, SYNTHES, '498.152, 2EA; '7.0MM CLICKX S-TAP SCREW 40MM, SYNTHES, '498.503, 6EA; '7.0MM CLICKX S-TAP SCREW 45MM, SYNTHES, '498.504, 4EA; 'TI 3-D HEAD FOR CLICKX SCREWS, SYNTHES, '498.571, 24EA; 'TI LOCKING CAP FOR TI 3-D HEAD, SYNTHES, '498.570, 24EA; '4.0MM TI CANC SCREW S-TAP 14MM, SYNTHES, '450.135, 12EA; '7.0MM CLICKX S-TAP SCREW 50MM, SYNTHES, '498.505, 6EA; '3.2MM DRILL BIT/QC/145M LC-DCP, SYNTHES, '310.31, 2EA; '2.7MM CORTEX SCREW SELF-TAPPING 10MM, SYNTHES, '202.810, 6EA; '2.7MM CORTEX SCREW SELF-TAPPING 12MM, SYNTHES, '202.812, 6EA; '2.7MM CORTEX SCREW SELF-TAPPING 14MM, SYNTHES, '202.814, 6EA; '2.7MM CORTEX SCREW SELF-TAPPING 16MM, SYNTHES, '202.816, 6EA; '2.7MM CORTEX SCREW SELF-TAPPING 18MM, SYNTHES, 202.818,6EA; 'CORTEX SCREW 2.7M 20M SELF TAP, SYNTHES, '202.820, 6EA; 'CORTEX SCREW 2.7M 28M SELF TAP, SYNTHES, '202.828, 6EA; 'CORTEX SCREW 2.7M 30MM SELF TAP, SYNTHES, '202.830, 6EA; 'CORTEX SCREW 2.7M 32MM SELF TAP, SYNTHES, '202.832, 6EA; 'CORTEX SCREW 2.7M 34MM SELF TAP, SYNTHES, '202.834, 6EA; 'CORTEX SCREW 2.7M 45MM SELF TAP, SYNTHES, '202.845, 6EA; 'CORTEX SCREW 2.7M 55MM SELF TAP, SYNTHES, '202.855, 6EA; '1.1MM NON-THREADED GUIDE WIRE 150MM, SYNTHES, '292.623, 10EA; '6.5MM CANCELLOUS SCREW 32MM THREAD/115MM, SYNTHES, '217.115, 5EA; '6.5MM CANCELLOUS SCREW 32MM THREAD/120MM, SYNTHES, '217.120, 5EA; '6.5MM CANCELLOUS SCREW 16MM THREAD/120MM, SYNTHES, '216.120, 5EA; '6.5MM CANCELLOUS SCREW 16MM THREAD/115MM, SYNTHES, '216.115, 5EA; '4.5MM DRILL BIT/QC/145MM, SYNTHES, '310.44, 2EA; '6.0MM TI SOFT ROD 75MM CVD, SYNTHES, '498.142, 3EA; '6.0MM TI SOFT ROD 65MM CVD, SYNTHES, '498.141, 4EA; '6.0MM TI SOFT ROD 75MM STRAIGHT, SYNTHES, '498.151, 2EA;The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. 1) Past performance 2) Technical capability 3) Price 4) Delivery. Past performance and technical capability when combined has more importance than price. Responses must be submitted to the POC no later than May 2, 2007; 12 PM; Japan Standard Time. Responses shall be submitted via e-mail in Word, Excel, or PDF format to the POC, Hiro Oshiro, at hiro.oshiro@med.navy.mil or faxed to 011-81-989-93-5754. Responses received will be evaluated; however, a determination by the Government not to compete the proposed procurement based upon responses to this notice is solely within the discretion of the Government. If no responses are received, U.S. Naval Hospital, Okinawa, Japan will proceed with the sole source procurement.
 

Place of Performance

Address: PSC 482 BOX 248, FPO AP

Zip Code: 96362-1695

Country: JAPAN
 

Record

SN01278208-W 20070422/070420221450 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |