SOURCES SOUGHT
66 -- Angle position indicators
- Notice Date
- 4/25/2007
- Notice Type
- Sources Sought
- NAICS
- 334516
— Analytical Laboratory Instrument Manufacturing
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, 562 CBSSS GBKA (AFMETCAL), 813 Irving Wick Dr. W., Heath, OH, 43056-6116, UNITED STATES
- ZIP Code
- 00000
- Solicitation Number
- Reference-Number-08S301ADC
- Response Due
- 5/10/2007
- Archive Date
- 3/30/2008
- Description
- Angle Position Indicators This request for information/sources sought announcement is issued to identify potential sources and gather information on current capabilities within the market. The Air Force Metrology and Calibration Program is considering a purchase of Angle Position Indicators This Sources Sought Synopsis describes an Angle Position Indicator. This item shall be a component of a PATEC used as a working standard to measure synchro and resolver angle positions. The signal input line to line voltage range shall include from 10 to 100 Vrms, and signal input frequency range shall include from 360 Hz to 1200 Hz. The signal lines input impedance shall not be less than 1 Megohm. The reference input level range shall include from 10 to 115 Vrms, and reference input frequency range shall include from 360 Hz to 1200 Hz. The angular measurement error shall not exceed +/-0.005. The angular measurement range shall be 0.000 to 359.999 degrees in 0.001 degree steps in unipolar mode and 0.000 degrees through +/-179.999 degrees in 0.001 degree steps in bipolar mode. All functions of the item shall be capable of being remotely accessed via an IEEE- 488 General Purpose Interface Bus and an external controller. The total estimated quantity is 78 Unit(s). Surplus or used material is not acceptable for this item. Offerors responding to this sources sought market research must (1) state whether they are a small or large business and indicate if your company is a small disadvantage or woman-owned business, 8(a) firm, or a historically black college or university or minority institution (HBCU/MI), or a historically underutilized business zone (HUBZone) small business; place of manufacture(2) advise what the longest period of time is that you can hold the quoted price; (3) advise if you have the item on a GSA schedule or other Government contract; (4) provide information concerning the technical capabilities of the product you are interested in offering, including commercial literature/brochures; (5) advise if you accept the Government purchase card; (6) any other pertinent information which would enable the government to assess your firm?s capabilities; (7) provide point of contact and assigned Commercial and Government Entity (CAGE) Code; (9) advise how much time you would need to submit a technical proposal once the solicitation is issued; (10) provide an estimated price for one each of the unit you would be offering. This synopsis is for planning purposes only and is NOT to be construed as a commitment by the Government nor will the Government pay for information solicited hereunder. At this time, no solicitation exists. Submit all responses to this notice to the point of contact listed below. All responses should be submitted to Glenna Pound, Contracting Officer, via e-mail at mlk@afmetcal.af.mil or by Fax at 740-788-5157 or mail to 813 Irving-Wick Dr W,Bldg 2, Heath Oh 43056-1199, if e-mail response is not possible. Use reference number 08S-301A-DC in your response. Responses are due by 05-10-2007 Glenna Pound, Contracting Officer glenna.pound@afmetcal.af.mil
- Record
- SN01280998-W 20070427/070425220826 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |