SOLICITATION NOTICE
71 -- Electronic Cabinets and Power Distribution Panels
- Notice Date
- 5/10/2007
- Notice Type
- Solicitation Notice
- Contracting Office
- N61331 110 Vernon Ave Panama City, FL
- ZIP Code
- 00000
- Solicitation Number
- N6133107T0028
- Response Due
- 5/15/2007
- Archive Date
- 6/14/2007
- Description
- The Naval Surface Warfare Center Panama City (NSWC PC) intends to solicit A & J Manufacturing Company, Inc., 14831 Franklin Avenue, Tustin, CA 92780-7006 on a sole source basis for the following items: CLIN 0001: Four (4) each EMI shielded, shock qualified equipment cabinets meeting the following minimum mandatory physical and performance requirements: Size: 23? W x 26? D x 72? H, not including lifting rings; Weight: 130 pounds, empty; Cooling: two independent 235 CFM cooling fans, mounted in the top rear of the cabinet with the intake in the bottom. EMI filters on the intake and outflow; Certified to MIL-STD-461E, shipboard interior spaces and MIL-STD-810, Grade A shock without resilient shock mounts; Configuration: EIA Retma rails; Door must open >100 degrees and have positive locking mechanism; Removable rear connector panel; Cabinets must break down completely to facilitate shipboard installation, PN: B758-1000; CLIN 0002: Two (2) each Power Distribution Panels meeting the following minimum physical and performance requirements: Size: fit into a standard rack no more than 2U high; Circuits: 8 each 10A circuits with fuses, SPST switches, and status lights; Surge suppressor; Terminal block; Anti-trip switch bar; Meets MIL-STD-461E, MIL-STD-1399-300, and MIL-STD-810 Grade A shock requirements, PN: 150-274. CLINs 0003 through 0006 are for mounting hardware for the cabinets and panels and must meet the requirements of MIL-STD-461E shipboard interior spaces. CLIN 0003: Twenty (20) each Cable Retractor, PN: 150-080-2; CLIN 0004: Twenty (20) each Fixed Shelf, PN: 150-005; CLIN 0005: Eight (8) each 2 inch Slide Mount Plate, PN: 150-195; CLIN 0006: Three (3) each 4 inch Slide Mount Plate, PN: 150-309. This purchase is sole source for the following reasons. A&J is the only manufacturer of ship-qualified racks that meet the minimum requirements and that will fit into the designated space available on the LCS-1 class ships. A&J is the only manufacturer providing an off-the-shelf cabinet meeting the minimum requirements. NAICS code is 337215, SBA size standard is 750 employees. FSC Code is 7195.
- Record
- SN01292022-W 20070512/070510221531 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |