SOURCES SOUGHT
10 -- 81mm Cylindrical Container
- Notice Date
- 5/25/2007
- Notice Type
- Sources Sought
- Contracting Office
- US Army ARDEC, AMSTA-AR-PC, Picatinny Arsenal, New Jersey 07806-5000
- ZIP Code
- 07806-5000
- Solicitation Number
- W15QKN-07-X-0335
- Response Due
- 6/25/2007
- Archive Date
- 7/25/2007
- Description
- The U.S. Army, TACOM- Picatinny Arsenal, N.J. is conducting a market survey to identify sources that are capable of supplying a lightweight molded cylindrical container. Container approximate dimensions are: 4??? OD (max), 3.24??? ID (min), 27.0625??? outside length (max) and 26.5??? inside length (min). Total estimated weight of container is 3 lbs. Container must be of two parts (one cap and one tube) with a latch closure system securing the cap to the tube. Cap shall be approximately 6??? of overall container length. Material(s) need to have the ability to be molded by common processes, particularly injection molding, with a cured state having a low overall weight and high impact strength. It is desired that the material(s) identified be of lowest raw material and manufacturing cost while meeting requirements. Cured containers shall not creep, exhibit low toxicity, resist UV and be resistant to such chemicals as hydraulic fluid, gasoline, ethylene glycol, lubricating oil and diesel fuel. Low smoke (less than 200 when tested IAW ASTM-E662) and flame spread indexes (less than 25 when tested IAW ASTM-E162) are desirable. Both containers must meet performance requirements of both 3 ft. and 7 ft. drop testing, and vibrational (secured and loose cargo) testing at -60??F, ambient, and +145??F temperature extremes in accordance with MIL-STD-1904A while holding contents weighing approximately 10 lbs. Container must maintain a 3psig seal after rough handling tests. One or more materials and/or manufacturing processes may be presented by interested sources. Manufacturing and disposal processes need to be environmentally friendly, with ability to dispose in common landfills necessary. All responding sources shall provide a summary of their company's capabilities including organizations, name/address/point of contact identification, a description of facilities/equipment, manufacturing process, inspection capability, personnel, past experience, proven monthly production capacity, possible partnering/teaming arrangements; and whether the company is a small or large business. Responses shall also provide info on experience with the government on similar products. The market survey is for planning purposes only and shall not be construed as a request for proposal or as an obligation on the part of the government. The Government will utilize the information provided for planning purposes only. All information submitted will be provided at no cost to the government and will be held in a confidential status. The contractor shall provide all information requested in this notification within 30 days of this publication by electronic mail to wilson.au@pica.army.mil.
- Web Link
-
US ARMY TACOM-Picatinny Procurement Network
(http://procnet.pica.army.mil/dbi/Download/GoGetSourcesSought.cfm?SolNum=W15QKN-07-X-0335)
- Record
- SN01303553-W 20070527/070525221348 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |