SOLICITATION NOTICE
Z -- USDA-ARS-SAA-CMAVE Bldg. 6 Roof
- Notice Date
- 8/10/2007
- Notice Type
- Solicitation Notice
- NAICS
- 238160
— Roofing Contractors
- Contracting Office
- Department of Agriculture, Agricultural Research Service, South Atlantic Area/Gainesville, FL, 1700 SW 23rd Drive, Gainesville, FL, 32608, UNITED STATES
- ZIP Code
- 00000
- Solicitation Number
- RFQ7-0022
- Response Due
- 9/3/2007
- Description
- Description/Specifications/Work Statement The Contractor shall provide all materials, equipment, and labor, for the complete replacement of the roof on building 6, with a modified bitumen roofing system. The Contractor shall replace the existing roof on building 6 by installing a two-ply, fiberglass, built-up roof system, with cap. The existing roof is approximately 3500 square feet. The system shall provide resistance to ultra-violet rays, caustic chemicals and acids, tears and punctures, and heat and cold. The roof must meet all applicable roofing codes. The Contractor shall protect all work and facilities, including all paving and faces of building walls. The Contractor shall provide special protection of the face of the building wall adjacent to the hoist. The Contractor shall complete the entire roofing section or any portion of the roof in a single day and take any other measures necessary to avoid exposure of the inside of the facility to rain, dew, or moisture of any kind. The Contractor shall clean and repair surfaces damaged or soiled as a result of his operations under this contract and return the surfaces to the same or better condition than before work commenced. This shall include, but is not limited to, damaged decking and insulation, and other equipment that penetrate the roof. The Contractor is responsible for the repairs to damaged decking caused by existing water leaks and/or any other source. The Contractor shall replace all flashing around the building with stainless or aluminum material. The Contractor shall match existing materials as closely as possible Deliver materials to the job in manufacturer's original unopened containers with brand name marked thereon. All materials used on this project must be fully compatible. All new material used in this roofing project shall be asbestos-free. The Contractor is responsible for removal of all foreign matter, rubbish, and scrap material from the roof. The surface shall be cleaned with cleaners identified by the manufacturer as suitable for the purpose used. The roof shall be clean, smooth, and dry before beginning the application the new roofing material. All debris shall be disposed of offsite. The Contractor shall provide a 20 year manufacturer's warranty and a 2 year material and labor warranty. The roofing manufacturer's technical representative and roofing Contractor shall inspect the roof prior to completion of the contract. After an authorized manufacturer's technical representative has inspected the roof to determine acceptability for warranty issuance, any deficiencies on the final inspection report shall be corrected by the Contractor and made ready for final inspection. Coordinate this inspection with the Contracting Officer's Representative, providing at least five days advance notice. The Contractor shall perform an analysis to determine presence of hazardous material and provide two copies of the findings to the Contracting Officer. The assessment shall be in compliance with the National Emission Standards for Hazardous Air Pollutants (NESHAP) regulations (Title 40 of the Code of Federal Regulations). The primary focus is to verifY the existence or absence of Regulated Asbestos Containing Materials (RACM), or Lead in any portion of the roofing system at or above the action levels that may be impacted as a result of this work. Should any products be identified, the Contractor shall notifY the Contracting Officer and shall submit a proposal to cover removal and disposal of the product in compliance with Federal, State and/or Local regulations. The removal and disposal of RACM will be added as a separate line item of this contract, if findings warrant the work.
- Place of Performance
- Address: USDA-ARS-SAA-CMAVE-Bldg#6, 1700 SW 23rd Drive, Gainesville, Florida
- Zip Code: 32608
- Country: UNITED STATES
- Zip Code: 32608
- Record
- SN01368608-W 20070812/070810220515 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |