SOLICITATION NOTICE
66 -- Advantage Plus Freeze Dryer El
- Notice Date
- 8/14/2007
- Notice Type
- Solicitation Notice
- NAICS
- 333414
— Heating Equipment (except Warm Air Furnaces) Manufacturing
- Contracting Office
- ACA, Dugway Proving Ground, Division of Contracting, Building 5330 Valdez Circle, Dugway, UT 84022-5000
- ZIP Code
- 84022-5000
- Solicitation Number
- W911S607T0094
- Response Due
- 8/23/2007
- Archive Date
- 10/26/2007
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in subpart 12.6 of the FAR (Federal Acquisition Regulation) as supplemented with additional information included in this notice. U.S. Army Dugway P roving Ground, Directorate of Contracting is contemplating the procurement of: (a) CLIN 0001 one (1) EA Advantage Plus Freeze Dryer El-Comes with 3 production style, fluid-cooled 10 inches x 14 inches heated product shelves with shelf temperature range fr om-70 C degrees to= 60 degrees C, Part Number ADPEL3; (b) CLIN 0002 one (1) EA Leybold 2.5 vacuum pum-65 LPM-2-Stage w/gas ballast, Part Number 65E; CLIN 0003 (c) one (1) EA Oil Mist Eliminator & adaptor for Leybold D2.5E (65 LPM) vacuum pump, Part Number 414203; (d) CLIN 0004 one (1) EA Stoppering Configuration-Unit will use pneumatic top down stoppering platen that compresses the shelves from the top down, for stoppering vials under vacuum. 60 psi air or gas required for operation, Part Number SC; (e) CLI N 0005 one (1) EA Removable bottom stainless steel tray (10 inches x 14 inches) for use with Advantage Freeze Dryer. Allows vials to sit directly on the shelf for better heat transfer, Part Number 351999; (f) CLIN 0006 one (1) EA Wizard Automated Control System: Automatic control system that allows the end user to input different recipes via a numeric keypad. Wizard 2.0 features include: graphic recipe profile, recipe center, alarm center, scrolled messaging, manual and automatic modes, and line printer i nterface. LCD display continuous shelf (and product probe, if applicable) temperature, condenser temperature and vacuum indication. Hardware includes: (2) Type T Product-Termperature Thermocouple Probes, (1) Precision Thermocouple Vacuum Sensing Transduc er. Recipe Center includes: (16) receipes each with (12) Thermal Treatment Steps/Vacuum level Control Steps, (1) Secondary Drying Heat Input Step/Vacuum level Control Step. Alarm Center includes Cycle and Post-Cycle Alarm Messages. Message Center includ es Status Prompt Messages to simplify operation and programming, Part Number WCSA. (g) CLIN 0007 five (5) EA ? inch Port Adapter-Straight Stainless Steel Adapter for connecting 150-2000ml filter seal flasks to ? inch ports, Part Number 177923. (h) CLIN 0 008 two (2) EA 1200ml Wide Mouth Filter Seal Flask-Complete Assembly. Includes, O-Ring, 1 Filter Paper, Widemouth Flask Cover, Flask bottom and Filter Disk, Part Number 118273. (i) CLIN 0009 two (2) EA 2000ml Wide Mouth Filter Seal Flask-Complete Assembl y. Includes 1 Filter Paper, Widemouth Flask Cover, Flask bottom and Filter Disk, Part Number 118307. (j) CLIN 0010 five (5) EA 600ml Wide Mouth filter Seal Flask-Complete Assembly. Includes, O-Ring, 1 Filter Paper, Widemouth Flask Cover, Flask bottom an d filter Disk, Part Number 118232. CLIN 0011 one (1) each Lab Cart/Galvanized Steel w/o Power Strip, Part Number 375481. This is a notice of intent to negotiate on a sole source basis with SP Industries, 815 Route 208, Gardiner, New York, 12525. Pursuant to 10 U.S.C. 2304 (C) (1) and Federal Acquisition Regulation 6.302-1, supplies, services and/or equipment are available from one responsible source and no other type of supplies, services and/or equipment will satisfy agency requirements. This announceme nt constitutes the only solicitation requested and a written solicitation will not be issued. Supporting evidence must be furnished to demonstrate the ability to comply with the governments requirements. The solicitation is issued as a request for quote (RFQ). Submit written offers on RFQ W911S6-07-T-0094. All firms responding must be registered with the Central Contractor Registration (CCR). North American Industrial Classification Standard 333415 (100) size standard in number of employees applies to this procurement. The following provisions and/or clauses apply to this acquisition: FAR 52.212-1, Instructions to Offerors Commercial Items; FAR 52 .212-3 ALT I; Offeror Representations and Certifications -- Commercial Items, applies to this solicitation: FAR 52.212-4 Contract Terms and Conditions Commercial Items. The clause at FAR 52.212-5; Contract Terms and Conditions Required To Implement St atutes or Executive Orders--Commercial Items, applies to this solicitation. Specifically, the following clauses cited are applicable to this solicitation: FAR 52.222-3; FAR 52.222-19; FAR 52.222-21; FAR 52.222-26; FAR 52.222-36; FAR 52.225-13 and FAR 52.23 2-33. The clause at DFARS 252.212-7001 Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items applies to this solicitation. Specifically, the following clauses cited are ap plicable to this solicitation: DFARS 252.211-7003, DFARS 252.225-7035, DFARS 252.226-7036, DFARS 252.232-7010, DFARS 252.227-7015, DFARS 252.227-7037, DFARS 252.232-7003, and DFARS 252.247-7023, ALT III. The following FAR clauses are incorporated by re ference; FAR 52.204-7, Central Contractor Registration; FAR 52.247-34. FOB; Destination, (Accountable Property Officer, Building 5464, Dugway Proving Ground, Dugway Utah, 84022), and DFARS 252.204-7004 Alt A, Central Contractor Registration. The follow ing local clauses apply to this solicitation: Foreign Visitors / Employees; Location of U.S. Army Dugway Proving Ground; Normal Work Hours; Contractor Access to DPG and OSHA Standards. All quotes must be emailed to Miss. Dayna Parkin at dayna.parkin@us.a rmy.mil in either Microsoft Office or Adobe Acrobat PDF format. For any questions or concerns you may email Miss. Dayna Parkin at dayna.parkin@us.army.mil. Quotes are due no later than 10:00 AM (prevailing local time at U.S. Army Dugway Proving Ground, Utah), Thursday, 27 Aug 2007.
- Place of Performance
- Address: ACA, Dugway Proving Ground Division of Contracting, Building 5330 Valdez Circle Dugway UT
- Zip Code: 84022-5000
- Country: US
- Zip Code: 84022-5000
- Record
- SN01372172-W 20070816/070814221540 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |