MOD | 49 | THIS IS TO CANCEL THE PREVIOUS SOLICITATION FOR PARTS WASHING SERVICE THAT WAS ISSUED IN ERROR.

FBO DAILY ISSUE OF MARCH 08, 2008 FBO #2294
MODIFICATION

49 -- THIS IS TO CANCEL THE PREVIOUS SOLICITATION FOR PARTS WASHING SERVICE THAT WAS ISSUED IN ERROR.

Notice Date: 3/6/2008
Notice Type: Modification
NAICS: 532490 — Other Commercial and Industrial Machinery and Equipment Rental and Leasing
Contracting Office: US Army Contracting Command Korea, Unit #15289, APO, AP 96205-5289
ZIP Code: 96205-5289
Solicitation Number: W91QVNPARTSWASHING
Response Due: 3/14/2008
Archive Date: 5/13/2008
Point of Contact: Tyrone Wescott, 524-3397
E-Mail Address: Email your questions to US Army Contracting Command Korea
(tyrone.wescott@us.army.mil)
Small Business Set-Aside: Total Small Business
Description: This sources sought notice is issued for information and planning purposes only. The Government is soliciting inforamtion to determine the availability of capable contractors that can perform the following requirement. The Army Contracting Command (A CC) at Fort Carson, Colorado plans to issue a solicitation and subsequent contract for parts washing, rental, service and maintenance. PERFORMANCE WORK STATEMENT Parts Washer Rental and Solvent Recycling/Continued Use Services 1. Serv ice Requirements: (a) The Contractor shall provide all parts washers, servicing and maintenance of provided parts washers, and solvent recycling/continued used services as required to Fort Carson. The Contractor shall provide solvents, as requir ed for these services. The following is a list of parts washer specifications required to meet the needs of this contract: Item 1: A small, bench top parts washer, with roll-around cart, that can be placed on a countertop or rolled around on its cart. The solvent in the reservoir below the parts washing sink must pass through a particulate filter and then a 'flow-through' style brush so that all parts may be manually cleaned using the brush. The solvent drains in the sink, back to the reservoir. T he sinks dimensions shall be approximately 30W X 15 D, with a depth of not less than 7. Quantity, 2 each. Item 2 A sink-on-a-drum parts washer with a fusible link cover, flexible metal spigot and lamp. The sinks dimensions shall be approximat ely 36W X 26 D, with a depth of not less than 8. Quantity, 31 each. Item 3: A vat-style parts washer featuring a fusible link safety lid, flexible metal spigot and lamp. The sinks dimensions shall be approximately 33W X 24 D, with a depth of not less than 11. Quantity, 6 each. Item 4: An agitating parts washer for large parts with a platform that lowers for soaking and agitating the soiled parts to enhance cleaning. The agitation speed must be is adjustable by the operator dependin g on the automated cleaning speed required. This equipment shall also have a pump and flow-through brush for manual cleaning on the the internal tray. The vats dimensions shall be approximately 52W X 36 D, with a depth of not less than 14. Quantity, 2 each. (b) For part washer installation quantities, locations and required services frequencies see attachment 1 (c) All Parts washers provided shall be serviced and maintained by the contractor. Services shall include the removal an d replacement of parts washer solvent on a routine basis with all used solvent managed under a continuous use program. Maintenance shall include the inspection, cleaning and repair or replacement of all unsafe, damaged or inoperable machines or components. (d) If the contractor feels the machine has been rendered inoperable due to neglect or abuse, they need to contract the COR immediately to resolve the issue. 2. Personnel. (a) Contractor shall fulfill the management and techn ical requirements of this contract with no supervision from the Government. (b) This is a non-personal services contract and all personnel performing under this contract shall remain employees of the contractor and not employees of the Government. All such persons shall be under the control and supervision of the contractor at all times. The contractor shall provide sufficient personnel who meet all requirements in contract who can perform in strict accordance with the contract. 4. Qualifi cations: The following criteria must be met. (a) Contractor and their facility must meet all Federal, State and Local laws for the handling of Hazardous Materials. (b) Manage used solvents under a continuous use program where our used solvent s will be continuously used for their originally intended purpose (i.e., cleaning) without processing (c) Possess all Federal, State and Local transport ation licenses and endorsements for transport of Hazardous Materials. (d) Have minimum of six months experience managing hazardous materials in a permitted facility. (e) Be ISO 14001 certified. 5. Post Security/Control (General).<B R> (a) Employee Identification. Contract personnel shall wear contractor issued identification at all times while working on Fort Carson. Identification may be a contractor badge, logod shirt or any other commercially acceptable means of visible iden tification (b) Gate Control. The Fort Carson military installation is a limited access post with controlled gate openings and closures. Gate operating times and procedures are published by the Provost Marshal Operations Division. Unscheduled gat e closures by the Military Police may occur at any time, and all personnel entering or exiting the installation may experience a delay in doing so due to vehicle inspections, registrations, seat belt use verification, etc. No price adjustments will be mad e for any delays resulting from gate closures or controls. (a) Contractor Operated Vehicles. Contractor vehicles shall enter through Contractor Gate #3 unless otherwise directed by installation policy. Contractor vehicles shall be clearly marked on both sides, possess all required registration and insurance in accordance with local laws. 6. Performance period. Performance period shall be April 1, 2008 March 31, 2011. Attachment Table of Contents DOCUMENT TYPE DESCRIPTION PAGES DATE Attachment 1 Parts Washer Installation Locations and Services Frequencies 1 2/4/08 Attachment 1 Parts Washer Installation Locations and Services Frequencies CLIN MODEL BLDG UNIT NAME SVC Item 1 8000 DOL 13 Item 1 8000 DOL 13 Item 2 8000 DOL 13 Item 2 8000 DOL 13 Item 2 8000 DOL 13 Item 2 8000 DOL 13 Item 2 8000 DOL 13 Item 2 8000 DOL 13 Item 2 8000 DOL 13 Item 2 8000 DOL 13 Item 2 8000 DOL 13 Item 2 8000 DOL 13 It em 2 8000 DOL 13 Item 2 8000 DOL 13 Item 2 8000 DOL 13 Item 2 8000 DOL 13 Item 2 8000 DOL 13 Item 2 8000 DOL 13 Item 2 8000 DOL 13 Item 3 8000 DOL 13 Item 3 8000 DOL 13 Item 3 8000 DOL 13 Item 3 8000 DOL 13 Item 3 8000 DOL 13 Item 3 8000 DOL 13 Item 4 8000 DOL 13 Item 4 8000 DOL 13 Item 2 8030 3/3 ACR 7 Item 2 8030 3/3 ACR 7 Item 2 8030 3/3 ACR 7 Item 2 8030 3/3 ACR 7 Item 2 8030 52nd ENG 7 Item 2 8030 52nd ENG 7 Item 2 8030 52nd ENG 7 Item 2 8030 64th FSB 7 Item 2 8030 64th FSB 7 Item 2 8030 64th FSB 7 Item 2 8930 ECS 42 USAR 7 Item 2 9277 SEABEES 7 Item 2 9550 DPTM RANGE 7 Item 2 9550 DPTM RANGE 7
Web Link: tyrone.wescott@us.army.mil
(http://www2.fbo.gov/spg/USA/DABP/DABP01/W91QVNPARTSWASHING/tyrone.wescott@us.army.mil)
Place of Performance: Address: US Army Contracting Command 1676 Evans Street, Bldg 1220 3rd Floor Fort Carson CO; Zip Code: 80913-5198; Country: US
Record: SN01525931-W 20080308/080306224505 (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

49 -- THIS IS TO CANCEL THE PREVIOUS SOLICITATION FOR PARTS WASHING SERVICE THAT WAS ISSUED IN ERROR.