Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY ISSUE OF JUNE 27, 2008 FBO #2405
SOURCES SOUGHT

13 -- M903

Notice Date
6/25/2008
 
Notice Type
Sources Sought
 
Contracting Office
Department of the Army, U. S. Army Materiel Command, JM&L LCMC Acquisition Center, Picatinny, US Army ARDEC, AMSTA-AR-PC, Picatinny Arsenal, New Jersey 07806-5000
 
ZIP Code
07806-5000
 
Solicitation Number
W15QKN-08-X-0697
 
Response Due
7/10/2008
 
Archive Date
8/9/2008
 
Point of Contact
Margaret Heyrich, Contract Specialist, (973)724-3871
 
Small Business Set-Aside
N/A
 
Description
Purpose The Joint Munitions and Lethality Life Cycle Management Command (JM&L LCMC) is seeking sources for Caliber.50, M903 Saboted Light Armor Piercing (SLAP) and M962 Saboted Light Armor Piercing Tracer (SLAP-T) cartridges, as required by the Project Manager for Maneuver Ammunition System (PM-MAS). These cartridges use a hard tungsten core to permit penetration of lightly armored targets at ranges up to 1500 Yards and for unlinked Caliber.50 M962 SLAP-T to be used in a sub-caliber Tank Training Device. The primary configuration for these cartridges shall be linked in a ratio of 4 ball (M903) to 1 Tracer (M962), using M9 metallic links, in belts of 100 cartridges, packed 100 cartridges per M2A1 container, 2 - M2A1 containers per Wire Bound Box. A secondary packaging configuration consisting of only SLAPT M962 cartridges, packed 120 rounds bulk configuration per M2A1 container, 2 M2A1 container per Wire Bound Box is also contemplated. Operational Requirements - Packaging shall be capable of providing weather resistance to the ammunition and be capable of OCONUS shipment (Land, SEA and Air) without disruption or damage to any portion of the procured ammunition. Specific areas of interest include high performance and reliability through extreme operating temperatures (-65F to +125F), fully acceptable functional safety and long term storage stability (at up to +160F) and a commercial off-the-shelf supplier with a demonstrated manufacturing process. Tracer performance shall be out to a range of minimum 1500 yards. The Caliber.50 Sabot Light Armor Penetrator and Sabot Light Armor Penetrator Tracer Cartridges shall operate in outdoor ranges with an effective range out to a minimum of 1500 yards, within the permissible exposure limits established by the Occupational Safety and Health Administration (OSHA) and the Environmental Protection Agency (EPA), and, when fired, will not generate a hazardous waste as listed under 40 CFR. All potential sources must meet the performance requirements currently required for the M903 and M962 cartridges, including but not limited to, all interior and exterior ballistic qualities of the current military specification (MIL-C-70663B), penetration requirements at 1500 yards as well as 275 yards. Must function normally in all Caliber.50 M2HB family of military weapons across all operational temperature and environmental extremes, without altering such weapons, must not damage such weapons, and shall not expose the shooter to toxic materials listed by the American Conference of Government Industrial Hygienists (ACGIH) threshold limit values or OSHA as listed in 29 CFR 1910. Production Requirements - The production rate shall be a minimum of 100,000 cartridges per month of sustained production, with capability to increase production rate to 200,000 per month on demand for extended periods. The design and manufacture of this item shall be in conformance with MIL-C-70633B, Drawing # 12902957 for 4 M903 Linked to 1 M962 and Drawing #12902958 for M962 Cartridge Bulk Pack. The secondary packaging configuration shall be procured for a minimum of 100,000 Cartridges. Tungsten penetrators shall be required to be procured from two sources. Contracting Information - The anticipated period of performance shall be from FY10-FY14 and utilize an Indefinite Delivery/Indefinite Quantity (IDIQ) Type contract over the five (5) years. For Further Information - All interested parties should submit a description of their capabilities along with sketches, drawings, specifications, brochures, current estimated unit cost per million, monthly production capability, and/or test results within 15 days of this notice to: US Army JM&L LCMC, AMSML-AQ-MA, Margaret Heyrich, Phipps Rd., Bldg 10, Picatinny Arsenal, NJ 07806-5000 or by email to: Margaret.heyrich@us.army.mil. This is a market survey, not a pre-solicitation notice. If a formal solicitation is generated at a later date, a solicitation notice will be published. All information is to be submitted at no cost or obligation to the Government. The Government reserves the right to reject, in whole or in part any private sector input as a result of this market survey. SEE NOTE 25.
 
Web Link
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=9358c86e440ea5d81b36a953f9fe84ed&tab=core&_cview=1)
 
Record
SN01600851-W 20080627/080625220251-9358c86e440ea5d81b36a953f9fe84ed (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.