Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY ISSUE OF AUGUST 27, 2008 FBO #2466
SOLICITATION NOTICE

36 -- SHELL BEAMER ARBOR ASSEMBLY

Notice Date
8/25/2008
 
Notice Type
Presolicitation
 
Contracting Office
Department of the Interior, National Business Center, AQD - Herndon, Acquisition Services Directorate, Attn: Mr. Jehad Salameh 381 Elden Street, Suite 4000 Herndon VA 20170
 
ZIP Code
20170
 
Solicitation Number
1406-0408-CT-20962
 
Response Due
9/8/2008
 
Archive Date
8/25/2009
 
Point of Contact
Jehad Salameh Contracting Officer 7039643581 jehad.salameh@aqd.nbc.gov;<br />
 
Small Business Set-Aside
N/A
 
Description
General Information Document Type:Solicitation AnnouncementSolicitation Number:1406-0408-CT-20962Original Response date:September 8, 2004 Classification:Special Industry Machinery Contracting Office Address Department of the Interior, National Business Center, Acquisition Services Directorate (AQD), 381 Elden Street, Suite 4000, Herndon, VA 20170 Description The U.S. Department of Navy, Pearl Harbor Naval Shipyard &IMF has a requirement for Shell Reamer Arbor Assembly per Dwg. No. SMA1901A. This requirement is being issued by the Acquisition Services Directorate under The Department of the Interior's Franchise Fund authority on behalf of the U.S. Department of Navy, Pearl Harbor Naval Shipyard &IMF. This acquisition will be using the Simplified Acquisition Procedures conducted in accordance with FAR Part 13 and in accordance with FAR 6.302-1, Only One Responsible Source and No Other Supplies or Services Will Satisfy Agency Requirements. The U.S. Department of the Interior, Acquisition Services Directorate (DOI/AQD) intends to award a sole source purchase order to MTP Associates, Inc., 7 Jacobs Meadow Road, East Sandwich, MA 02537-1079, which is a small business. The Shell Reamer Armor Assembly consists of a shaft assembly, collar, bushings, reamers, screws, and taper pins. The following parts are required (see table below, and attached drawing), and being procured for the Shell Reamer Armor Assembly: QuantityPart No. Description1SMA1901 Shaft Assembly1SMA1901D2 Drive Collar1SMA1901D3-1,-2,-3,-4Front Bushings1SMA1901D4-1,-2,-3,-4Bushings2SMA1901D5 End Cut Reamer, 4.0"2SMA1901D6-1 Reamer, 4.031" (Step)2SMA1901D6-2 Reamer, 4.068" (Finish)1SMA1901D6-3 Reamer, 4.094" (Safety Finish)12-20 x 5/8 Socket Head Cap Screws10#6 x 3.25 Taper Pin2 End Cut Reamer, 3.938"2 Reamer, 3.969"1 3.938 OD Front and Rear Pilot Bushings1 3.969 OD Front and Rear Pilot Bushings The North American Industry Classification System Code (NAICS) for this requirement is 333515 " Cutting Tool and Machine Tool Accessory Manufacturing". The size classification for this NAICS Code is 500 employees. This is not a formal solicitation. This is not considered a Request for Quote (RFQ) nor is it a Request for Proposal (RFP). No solicitation document is available and telephone requests will not be honored. No award will be made on the basis of quotations or offers received in response to this notice. Interested parties may identify their interest and capabilities. Additionally, any response to this notice must show clear, compelling, and convincing evidence that competition will be advantageous to the Government. If no affirmative written response is received, the contract will be awarded without further notice. A determination by the Government not to compete the proposed contract based on responses to this notice is solely within the discretion of the Government. Information received by the POC stated herein no later than 2:00 Pm EDT on Monday, September 8, 2008, will be considered by the Government. Please reference number 1406-0408-CT-20962 in any responses to this notice. Questions and/or responses must be emailed to Jehad.Salameh@aqd.nbc.gov. Telephone questions or requests will not be accepted or acknowledged. Original Point of Contact Jehad Salameh, Contract Specialist, Phone (703) 964-3581, Fax (703) 964-8490, E-Mail jehad.salameh@aqd.nbc.gov
 
Web Link
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=24ba602a46e53d539ab48a3a56f19410&tab=core&_cview=1)
 
Place of Performance
Address: PEARL HARBOR NAVAL SHIPYARD &IMFBLDG. 167 RECEIVING667 SAFEGUARD ST STE 100 CODE 982.1 L. SMITHPEAR HARBOR, HI<br />
Zip Code: 9860 5033<br />
 
Record
SN01650718-W 20080827/080825223210-24ba602a46e53d539ab48a3a56f19410 (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.