SOLICITATION NOTICE
29 -- Modernized Digital Electronic Control Unit (MDEC)
- Notice Date
- 10/6/2008
- Notice Type
- Presolicitation
- NAICS
- 336412
— Aircraft Engine and Engine Parts Manufacturing
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, Tinker OC-ALC - (Central Contracting), DEFENSE LOGISTICS AGENCY; DLR PROCUREMENT OPS DSCR-ZBA;3001STAFF DRIVE; TINKER AFB; OK; 73145
- ZIP Code
- 73145
- Solicitation Number
- SPRTA1-09-R-80032
- Response Due
- 11/20/2008
- Archive Date
- 2/18/2009
- Point of Contact
- Joe Starzenski, Phone 000-000-0000, Fax 000-000-0000, />
- E-Mail Address
-
oe.starzenski@tinker.af.mil<br
- Small Business Set-Aside
- N/A
- Description
- PR Number(s): FD20300980032Item: 0001NSN: 2995015404818PRPR Modernized Digital Electronic Control Unit (MDEC)P/N: 2123M24P03, Description: Item is 25 inches in length, by 19 inches in width, by 16.5inches in depth. Item description is a Turbine Engine SupervisoryControl Unit; (MDEC).Item function is as follows:The DEC directs engine manipulated variables; acquires and monitorsengine parameters, executes system fault detection and isolation. Italso communicates with the airframe and ground support equipment, andexecutes other functions as provided by the resident applicationsoftware. The DEC interfaces with components of main engine controlsubsystem, augmenter control subsystem, engine monitoring system (EMS),and aircraft. The following functions are performed by the DEC: 1 Limits maximum fan speed (NF) in primary and secondary mode. 2 Provides maximum core speed limit, accel and decel schedules, full fanspeed control, HPT blade temperature (T4B) limit, and minimum andmaximum CDP (PS3C) limit control. 3 Includes logic necessary to automatically switch to a hybrid orsecondary control mode by sensing a failure in the primary controlsystem. 4 Limits minimum core speed. 5 Controls fan IGV position. 6 Controls core VSV position. 7 Controls augmenter fuel ratio units (WFR/PS3). 8 Provides a self check and logic to indicate a failure of theelectrical control. 9 Schedules nozzle area roof and floor. 10 Controls fan discharge pressure ratio (Delta P/P). 11 Coordinates exhaust nozzle and augmenter fuel flow transients. 12 Provides the logic necessary to automatically control high energymain and augmenter ignition. Provides logic which develops and sequencessignals to provide transition between nonaugmented and augmentedoperation regimes. 13 Provides signals to the EMSC that are required for engine and controlsystem fault isolation. 14 Provides electrical excitation for linear and rotary variabledifferential transducers (LVDT and RVDT) and also the T2 sensor, flamesensor, and T4B pyrometer. Total Line Item Qty: 532.0000 Applicable to: NoneDestn: FB2039,Tinker AFB,OK.,73145-9013. Delivery: 31DEC2010, 20.00 PR Number(s): FD20300980032Item: 0002 Description: IN ACCORDANCE WITH THE REQUIREMENTS SET FORTH ON THE DDFORM 1423 (EXHIBITS A THROUGH E) ATTACHED AND MADE A PART HEREOF.Total Line Item Qty: 1.0000 LO Electronic procedure will be used for this solicitation. The proposed contract action is for supplies and services for which theGovernment intends to solicit and negotiate with only one, or a limitednumber of sources under the authority of FAR 6.302. Interested personsmay identify their interest and capability to respond to the requirementor submit proposals. This notice of intent is not a request forcompetitive proposals. However, all proposals received within fortyfive-days (thirty days if award is issued under an existing basicordering agreement) after date of publication of this synopsis will beconsidered by the Government. A Determination by the Government not tocompete this proposed contract based upon responses to this notice issolely within the discretion of the Government. Information receivedwill normally be considered solely for the purpose of determiningwhether to conduct a competitive procurement. See Note(s) 12, 25 and 26. A firm fixed price 3-year IDIQ type contract is contemplated.Estimated issue date is 21 Oct 08 and the estimated close date is 20 Nov08. New Manufactured Material/Spare. AMC: 5R Application is F110Engine. UID is required if the unit price exceeds $5,000. Requirementis not a Small Business Set-Aside. Requirement is Sole Source toGeneral Electric. It is suggested that small business firms or othersinterested in subcontracting opportunities in connection with thedescribed procurement make contact with the firm(s) listed: GE,Cincinnati OH. Based on market research, the Government is not usingthe policies contained in Part 12, Acquisition of Commercial Items, inits solicitation for the described supplies or services. Only written,e-mail, or faxed requests received directly from the requestor areacceptable. All responsible sources solicited may submit a bid,proposal, or quotation, which shall be considered. Reply Fax Number is(405)734-8106, ATTN: Joe Starzenski.
- Web Link
-
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=155ef0f6d242713cc5b0de2818194e1d&tab=core&_cview=1)
- Record
- SN01688421-W 20081008/081006214653-155ef0f6d242713cc5b0de2818194e1d (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |