SOLICITATION NOTICE
53 -- THE BOEING COMPANY IS OFFERING FOR SALE BY SEALED BID A VARIETY OF FEDERAL SURPLUS PROPERTY IN GOOD CONDITION - ORIGINAL ACQUISITION COST $218,280.75 - BID FORM
- Notice Date
- 2/2/2010
- Notice Type
- Sale of Surplus Property
- NAICS
- 333999
— All Other Miscellaneous General Purpose Machinery Manufacturing
- Contracting Office
- Defense Contract Management Agency, Defense Contract Management Agency, DCMA Louisiana/East Texas, c/o Michoud Assembly Facility, 13800 Old Gentilly Road, Building 350, New Orleans, Louisiana, 70189-0283
- ZIP Code
- 70189-0283
- Solicitation Number
- 0109-S0107A
- Archive Date
- 3/17/2010
- Point of Contact
- Delorese Kay Koller, Phone: (407)228-5260, Larry Honea, CPPA, Phone: Cell: 256-426-1637
- E-Mail Address
-
Kay.Koller@dcma.mil, larry.w.honea@boeing.com
(Kay.Koller@dcma.mil, larry.w.honea@boeing.com)
- Small Business Set-Aside
- N/A
- Description
- BID FORM This is your invitation to Bid. It contains descriptions of the property by lot number, sale terms, and a bid form. Bid amount is required by single lot which will include all items within that lot. SEALED BID SALE: 0109-S0107A BID CLOSE DATE: March 2, 2010, 5:00 PM CALL MR. Larry Honea at (256)426-1637, EMAIL ADDRESS: larry.w.honea@boeing.com TO SCHEDULE A CONVENIENT DATE AND TIME TO INSPECT PROPERTY. PROPERTY LOCATION: THE BOEING COMPANY 2775 WALL-TRIANA HWY, SUITE A HUNTSVILLE, AL 35824 DEFENSE FEDERAL ACQUISITION REGULATIONS Mandatory terms and conditions clauses 245.7309 - 245.7309.7 AND 245.7309.10 - 245.7309.14 apply. Standard Form 114C clause 24 prescribed by GSA FPMR (41CFR) 101-45-3) applies. REMOVAL OF PROPERTY MUST BE ACCOMPLISHED WITHIN TEN (10) DAYS FROM ASSIGNED REMOVAL DATE SPECIFIED IN THE NOTIFICATION OF SUCCESSFUL BID AWARD DOCUMENT. Property purchased in this sale cannot be brought back into The Boeing Company. Lot # 01 (Original Acquisition Cost $199,087.31) This lot includes various quantities of the following items: Terminal Solders, P/N 40F6071 Connectors, Part Numbers: 10-06568, 1199-1000-001; 1199-1000-006; 1199-4000- 002; 1199-4000-006;1205K100-001; D38999/20FJ35SN; D38999/24FC98SN, NSN: 5935-01-519-7997; D38999/24FJ19SB; D38999/26FC8PA; D38999/26FD35SA(TL); D38999/26FJ19PN; D38999/26FJ61PN(TL); D38999/24FJ61PB; 3-643813-4; 3- 643813-5; 4-643813-0; D38999/24WC8SN Connector Kits, Part Number 1205K100-001 Screws, Part Number 31F2197; MS51958-63 Backshells, Part Number 380HS002M2506H6, 380HS002M2512H6, 380HS002M2520H6; M85049/38S13W; M85049/38-11W; M85049/38-13W; M85049/38-23W; MS27488-22; 380HS115M1916M3; 380HS115M2316M3 Shorting Bars, Part Numbers 6165-0 Hole Plugs, Part Number 7845K57 Cable Assembly, Part Number 9057164-4, CA-2008-36; 9056603-1; 9056603-2; 9057435-1; 9053938-72 Breakout Box Assembly, Part Number 9057403-2 Cap Screw, Socket Head, Part Number 93705A583 Nut 4-40 Hex, Part Number 96278A005, NSN: 5940-00-204-8990 Terminal, Lug, Part Number BACT12AC53, NSN: 5940-00-143-4774; SPC11126 Cable Markers, Part Number CM-SCE-F2-5K-1/2-4H-4 Connector, Receptacles 19Socket, Part Numbers D38999/20FJ19SB, D38999/20FJ19SN, D38999/24/FB35PN, NSN: 5935-01-477-6722 Connector Plug, Part Number D38999/26FJ29PN, NSN: 5935-01-099-0558 Fuse, Part Number GMS-10A, NSN: 5920-01-017-0687 Resistor 100 OHM, Part Number M22684/01-0016 Tape Insulating, Part Number M631GTFGRACL1-1.00 Shield Termination Solder Style Heat Shrinkable, Part Number M83519/2-5 Nut Self-Locking, Part Number MS21042L3 Nut 5/16 ", Part Number MS35649-2312, NSN: 5310-00-829-9981 Spacer, Part Number NAS1056C6A015 Tubing, Part Number NTF4-1-1/2-0-SP, NSN: 5970-01-310-5062; NSN: 5970-01-251- 4414 Tape Perm Pres Sen - Part Number P252(TL) Test Board, Part Number PCI-PO-TEST Attenuator, Part Number PE7022-20 PL75C-201 PLUG, Part Number PL75C-2010048 Marker Label, Part Number PSPT-125-175Y, NSN: 7690-01-501-2641 Cable Marker, Part Number PSPT-187-175Y, NSN: 7690-01-501-2640 Resistor 1/4W, Part Number RC1/4G101JT; 100QBK-ND Tape Marking, Part Number RCM-637-1.5YL Tubing, Stainless Steel, Part Number SS-T8-S-049-20, NSN: 4710-01-550-5812 FDDI Switching Module, Part Number WS-X5101 GIGABIT Ethernet Switching Module, Part Number WS-X5403, NSN: 5998-01-539- 3676 Assembly Circuit Board, Part Number 9056520-1 Label Identification, Part Number 6722 Header 10 PIN Vertical, Part Number 1-640456-0 Lamp Led Red, Part Number 2150A1 Braid ½ Metal Tubular, Part Number 2174 Lamp Neon Red, Part Number 2191l5-24V, NSN: 6930-01-247-4524 Power Cord, Part Number 312014-01 Splice, Part Number 320559 Header, Part Number 640456-2; 640456-4, NSN: 5935-01-199-2715; 640456-5, NSN: 5935-01-273-7285 AC Power Module, Part Number 764-00/003 Tape Scotch 70 Self-Fusing Electrical, Part Number 80-0140-0009-7 Printed Wiring Board, Part Number 8050547-1 Washer, Part Number 90945A726; 92146A545; NAS620C8 Jack Screw, Part Number 92710A207 Switch, Push Button, Illuminated, Part Number A22L-GY-24A-10M Relay, 4PDT, Latching, Part Number DS4E-ML2-DC24V Foot, Plastic, Part Number F7800-A, NSN: 5340-01-476-7138 Serial HPPI Long Wave for Regatta, Part Number FC2733 P/S Power, Part Number HB24 1.2-A, NSN: 6130-01-469-7380 Diode Rectifier, Part Number IN4148FS-ND Current Regulator, Part Number J511 Cable Twisted, Part Number M27500-22ML2U00 Sleeve, Solder, Part Number M83519/2-4; M83519/2-6 Plug, Part Number MS27488-22, NSN: 5935-00-351-5944 Nut, Hex, 4-40UNC-2B, Part Number MS35649-244B Philips Head Screw, Part Number MS51957-45 Tape Glass, Part Number P213 PERC 6/3 SAS External Raid Adapter, Part Number 341-6109 Power Distribution Unit, Part Number TPC4100-C Coupler, Part Number 90-50204 Lot # 02 (Original Acquisition Cost $22,818.00) This lot includes the following items: Isolation Transformer, Part Number DTP1OUT-1 (QTY 2) Monitor, Part Number VLCDS23668-1W (QTY 5) Tool Cart, Part Number KRL488B (QTY 1) Test Rack, Part Number ESIM4 (QTY 1) Test Rack, Part Number ESIM3 (QTY 1) LCD/Keyboard KVM, Part Number KD-5170N (QTY 1) SURPLUS SALES TERMS AND CONDITIONS 1. Inspection. The Bidder is invited to inspect the property prior to submitting a bid. Failure to inspect property does not constitute grounds for the withdrawal of a bid after opening. 2. Condition and location of property. (a) All property is offered for sale "as is" and "where is." (b) The description is based on the best available information. However, the Contractor makes no warranty, express or implied, as to quantity, kind, character, quality, weight, size, or description of the property or its fitness for any use or purpose. (c) Except as provided in Variations in clause 14 Quantity or Weight, and clause 15 Risk of Loss, no request for adjustment in price or for rescission of the sale will be considered. This is not a sale by sample. 3. Consideration of bids. (a) Bidder agrees that this bid is firm and irrevocable within the acceptance period specified in the Invitation (or, if not specified, not less than ten or more than 60 days). (b) The right is reserved to reject any or all bids, to waive any technical defects in bids. 4. Payment. (a) Purchaser agrees to pay the full purchase price for awarded property at the prices quoted in the bid. ( b) The full purchase price shall be made by cashier's check or money order made payable to the U.S. Treasury. 5. Title. (a) Title to property sold under this Invitation shall vest in the Purchaser when full payment is made. 6. Delivery and removal of property. (a) The Purchaser shall be entitled to obtain the property upon vesting of title in the Purchaser. Delivery shall be made at the designated location, and removal will be at the Purchaser's expense within ten (10) days of notification of bid award. (b) The Purchaser shall reimburse the Contractor for any damage to the Contractor's property caused by Purchaser's removal operations. If additional time is required to remove the property, the Contractor, without limiting any other rights, may require the Purchaser to pay reasonable storage charges. 7. Default. If the successful Bidder fails to make full payment, remove property by the specified date, or comply with any other terms and conditions of sale, the Contractor reserves the right to sell or otherwise dispose of any or all such property and to charge losses and incidental expenses to the defaulting Bidder. 8. Risk of loss. The Contractor is responsible for reasonable care and protection of the property until the date specified for removal. All risk of loss, damage, or destruction from any cause whatsoever shall be borne by the Purchaser after passage of title. 9. Liability. When liability has been established, it shall not exceed the refund of any portion of the purchase price already received by the Contractor. 10. Oral statements. Any oral statement by the Contractor changing or supplementing the contract or any condition thereof is unauthorized. 11. Eligibility of bidders. The Bidder certifies that: (a) He/she is not employed by the U.S. Government; (b) He/she is not involved in the disposal process; (c) He/she is a U.S. Citizen. 12. Claims liability. The Purchaser or Bidder agrees to save the Contractor and Government harmless from any and all claims, demands, actions, debts, liabilities, judgments, costs, and attorney's fees arising out of, claimed on account of, or in any manner predicated upon loss of or damage to property of, and injuries to or the death of any and all persons whatsoever, in any manner caused or contributed to by the Purchaser or Bidder, their agents, servants or employees, while in, upon, or about the sale site on which the property sold or offered for sale is located, or while going to or departing from such areas; and to save the Contractor and Government harmless from and on account of damages of any kind which the Contractor may suffer as the result of the acts of any of the Purchaser's agents, servants, or employees while in or about the said sites. 13. REQUIREMENTS TO COMPLY WITH APPLICABLE LAWS AND REGULATIONS It is the bidder's responsibility to ascertain and comply with all applicable Federal, State, local and multi-jurisdictional laws, ordinances, and regulations pertaining to the registration, licensing, handling, possession, transportation, transfer, export, processing, manufacture, sale, use or disposal of the property listed in the invitation. Purchasers or users of this property are not excused from any violation of such laws or regulations either because the United States is a party to this sale or has had any interest in the property at any time. 14. Variations in quantity or weight When property is sold on a "unit price" basis, the Contractor reserves the right to vary by up to 15 percent the quantity or weight listed in the Solicitation and the Purchaser agrees to accept delivery with these limits. The purchase price shall be adjusted in accordance with the unit price and on the basis of the quantity or weight delivered. 15. Risk of loss The Contractor is responsible for reasonable care and protection of the property until the date specified for removal. All risks or loss, damage, or destruction from any cause whatsoever shall be borne by the Purchaser after passage of title. 9. Liability. When liability has been established, shall not exceed the refund of any portion of the purchase price already received by the Contractor. 10. Oral statements. Any oral statement by the Contractor changing or supplementing the contract or any condition thereof is unauthorized. 11. Eligibility of bidders. The Bidder certifies that: (A) He/she is not employed by the U.S. Government; (b) He/she is not involved in the disposal process; (c) He/she is a U.S. citizen. 12. Claims liability. The Purchaser or Bidder agrees to save the Contractor and Government harmless from any and all claims, demands, actions, debts, liabilities, judgments, costs, and attorney's fees arising out of, claimed on account of, or in any manner predicated upon loss of or damage to property of, and injuries to or the death of any and all persons whatsoever, in any manner caused or contributed to by the Purchaser or Bidder, their agents, servants or employees, while in, upon, or about the sale site on which the property sold or offered for sale is located, or while going to or departing from such areas; and to save the Contractor and Government harmless from and on account of damages of any kind which the Contractor may suffer as the result of the acts of any of the Purchaser's agents, servants, or employees while in or about the said sites. 13. REQUIREMENTS TO COMPLY WITH APPLICABLE LAWS AND REGULATIONS It is the bidder's responsibility to ascertain and comply with all applicable Federal, State, local and multi-jurisdictional laws, ordinances, and regulations pertaining to the registration, licensing, handling, possession, transportation, transfer, export, processing, manufacture, sale, use or disposal of the property listed in the invitation. Purchasers or users of this property are not excused from any violation of such laws or regulations either because the United States is a party to this sale or has had any interest in the property at any time. 14. Variations in quantity or weight When property is sold on a "unit price" basis, the Contractor reserves the right to vary by up to 15 percent the quantity or weight listed in the Solicitation and the Purchaser agrees to accept delivery with these limits. The purchase price shall be adjusted in accordance with the unit price and on the basis of the quantity or weight delivered. 15. Risk of loss The Contractor is responsible for reasonable care and protection of the property until the date specified for removal. All risks or loss, damage, or destruction from any cause whatsoever shall be borne by the Purchaser after passage of title.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DCMA/DSPPMRO/GEOHD/0109-S0107A/listing.html)
- Place of Performance
- Address: THE BOEING COMPANY, 2775 WALL-TRIANA HWY, SUITE A, HUNTSVILLE, Alabama, 35824, United States
- Zip Code: 35824
- Zip Code: 35824
- Record
- SN02055305-W 20100204/100202234922-a9e800d67f92eca39cd8697785fce3cd (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |