SOLICITATION NOTICE
52 -- Calibrate various models of Starrett Webber gage block sets.
- Notice Date
- 4/26/2010
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 334513
— Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables
- Contracting Office
- M67004 MARINE CORPS LOGISTICS COMMAND ALBANY RCO 814 Radford Blvd Albany, GA
- ZIP Code
- 00000
- Solicitation Number
- M6700410T0162
- Response Due
- 5/12/2010
- Archive Date
- 5/27/2010
- Point of Contact
- Judy Washington 229-639-9826
- Small Business Set-Aside
- Total Small Business
- Description
- SOLICITATION NUMBER: M67004-10-T-0162 SOLICITATION CLOSES: 12 May 2010 at 4:00 P.M. EST Point of Contact: Judy Washington, Contracts Department, (Code S1924), 814 Radford Blvd, MCLC, Albany, GA 31704-1128. Telephone: (229) 639-9826, Email: judy.washington@usmc.mil, This is a combined synopsis/solicitation for commercial services prepared in accordance with the format in FAR Subpart 12.6, as suplemented with additional information included with or attached to this notice. THIS NOTICE CONSTITUTES THE ONLY SOLICITATION. This Request for Quotation is 100% Set-Aside for Small Businesses. Only offers received from certified small businesses will be considered for award. NAICS 334513 - Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables, size standard of 500 employees applies. A firm-fixed price contract with a base year plus two option years is anticipated. The government reserves the right to make no awards resulting from this solicitation. The following services are required for Marine Corps Logistics Command, Maintenance Center Albany, GA. STATEMENT OF REQUIREMENTS This requirement is for the calibration of five (5) different models of Starrett Webber gage block sets. Each model consist of several serial numbers. Each set will be sent for calibration once every 12 months. The gage block sets shall receive an ISO 17025 accredited calibration and certificates of calibration provided in accordance with ISO 17025. Gage block sets will be shipped from the Government to the Vendor according to calibration due dates. Vendor will have 10 days from the date of receipt of the gage block set to calibrate in accordance with the above standards and return to the Government. If, during calibration procedures, a gage block is found defective/not repairable, the calibration contractor shall immediately notify the Government of the defective gage. It shall be returned with the set and clearly annotated as "defective". Replacement is not part of this anticipated contract and the vendor will not be reimbursed for replacements through this anticipated contract vehicle. If replacement gages are needed, the purchase will be made separately by purchase card or other means. The order may or may not be placed with the calibration contractor. ALL VENDORS SUBMITTING QUOTES FOR THIS REQUIREMENT MUST BE ISO 17025 ACCREDITED FOR GAGE BLOCK CALIBRATION.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DON/USMC/M67004/M6700410T0162/listing.html)
- Place of Performance
- Address: Marine Corps Logistics Command, Albany, Georgia
- Zip Code: 31704
- Zip Code: 31704
- Record
- SN02132678-W 20100428/100426235445-7d3afa4f128c2fed0b027c13e53df356 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |