MODIFICATION
16 -- Air Warrior Survival Kits, Ready Access & Modular Go Bags and Straps - change inDemo Models Technical Compliance
- Notice Date
- 6/7/2010
- Notice Type
- Modification/Amendment
- Contracting Office
- AMCOM Contracting Center - Air (AMCOM-CC), ATTN: AMSAM-AC, Building 5303, Martin Road, Redstone Arsenal, AL 35898-5280
- ZIP Code
- 35898-5280
- Solicitation Number
- W58RGZ-10-R-0160
- Response Due
- 6/17/2010
- Archive Date
- 8/16/2010
- Point of Contact
- Anne L. Baune, (256) 313-1699
- E-Mail Address
-
AMCOM Contracting Center - Air (AMCOM-CC)
(anne.baune@us.army.mil)
- Small Business Set-Aside
- N/A
- Description
- 1. Several technical issues have been brought to the government's attention and to quickly resolve them the following is synopsized. A formal amendment will be published shortly. 2. Tactile Bead Requirement for Proposal Demonstration Model (bid sample) changes: A. Additional Source for Tactile Bead: Only one suggested source was identified on drawing 1005843 as a supplier for the tactile bead 1005843-1. Another source of supply for tactile bead 1005843-1 is Switlik Parachute Co., Inc., 1325 East State Street, Trenton, NJ 08609, (609) 587-3300 X-114, fax (609) 586-6647, Part Number is 90-072. B. Change to the Proposal Demonstration Model (Bid Sample) - The Government will not grade the samples bead compliance to the drawing. Because the minimum purchase and color requirement may limit availability in the short term, any alternative placeholder for the tactile bead may be used in the bid sample. Some alternative suggestions are as follows 1. Drill out a rubber bumper http://www.mcmaster.com/#9305k21/=7fhbgg, 2. Spacers - use in place of tubular beads http://www.mcmaster.com/#92825a129/=7fhhsy, 3. Cut plastic/rubber tubing into beads, 4. Counting Knots (for telling ship's speed), or 5. Ball Buttons 3. SKRAM Bag and M-4 Magazine Pouch Material: A. AVNS-DTL-10836A describes the requirements for the SKRAM bag and lists the fabric to be used in manufacture as 1000 Denier IAW Drawing 1005936-3. B. The M-4 magazine pouch drawing 1005845 cites the fabrics to be used in manufacture IAW Drawing 1005937 and Drawing 1005936-1 (the 500 denier). The M-4 magazine pouch uses both fabrics, an FR Ripstop and an FR Nylon. The vendors for these two fabrics are listed on the pertinent fabric drawing.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/3f5fe6192605c44def50d2b58d661fed)
- Place of Performance
- Address: AMCOM Contracting Center - Air (AMCOM-CC) ATTN: AMSAM-AC, Building 5303, Martin Road Redstone Arsenal AL
- Zip Code: 35898-5280
- Zip Code: 35898-5280
- Record
- SN02169905-W 20100609/100607234602-3f5fe6192605c44def50d2b58d661fed (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |