MODIFICATION
B -- PARKER MOTION CONTROL EQUIPMENT
- Notice Date
- 7/27/2010
- Notice Type
- Modification/Amendment
- NAICS
- 423610
— Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers
- Contracting Office
- NASA/Lyndon B. Johnson Space Center, Houston Texas, 77058-3696, Mail Code: BH
- ZIP Code
- 00000
- Solicitation Number
- NNJ10345795Q
- Response Due
- 7/29/2010
- Archive Date
- 7/27/2011
- Point of Contact
- Daniel Dela Rosa, Contract Specialist, Phone 281-244-6875, Fax 281-244-5331, Email daniel.delarosa@nasa.gov - J. R. Carpentier, Contracting Officer, Phone 281-244-7254, Fax 281-483-2138, Email john.r.carpentier@nasa.gov
- E-Mail Address
-
Daniel Dela Rosa
(daniel.delarosa@nasa.gov)
- Small Business Set-Aside
- Total Small Business
- Description
- THIS NOTICE CONSTITUTES AMENDMENT NO. 1 TO THE COMBINED SYNOPSIS/RFQ FOR PARKERMOTION CONTROL EQUIPMENT. Companies shall acknowledge all amendment(s) in their quote. Companies submitting quotations are required to be authorized distributors of ParkerMotion Control Equipment. This notice serves as the official amendment to subjectsynopsis/RFQ and a written amendment will not be issued.The purpose of this amendment is to respond to questions submitted.Q1: We will need a full part number for the The Parker Motor (TPM) Power IntegratedMotor/Gearbox you show in the solicitation. I believe this to be a Wittenstein (Alpha),but need the full part number to completely determine the choice required. A1: Motor part number is TMP0505-007K-6P01-155D-W1.Q2: Can we cross this motor to a parker Motor? And with resolver feedback? A2: No, vendors cannot cross this motor to a Parker Motor and vendors cannot cross thiswith resolver feedback. The Government's requirement is absolute encoder feedback.Q3: We will need to know the ratio and size you require if available. If it needs to bethe TPM we will still need to know the size.A3: The Government requires a Parker Motor which matches the following traditional motorspeces of V = 560V, Imax = 63.5, and Torque = 340NM.Q4: The Parker 9030 controller is available with anywhere from 2 to 8 axis and with orwithout CANopen- Do you have more detailed information for your requirements?A4: The requirements are 2 axis with a total of 3 motors with CANopen, digitalcommunication capability, and analog inputs.Q5: What is the Compax3 Current (Amperage/Voltage) level required? A5: The Government requires Amperage/Voltage levels provided by Parker model numberS300V4F11I30T1M00.Q6: Omron Laser Sensor Is it ok to cross this to a Sick Sensor?A6: No The laser safety approvals are specific and therefore cannot be crossed to aSick Sensor. Q7: LM10 Rennishaw readheads are available with multiple resolutions and outputs akaLM10IC010CA10F00. Do you have a full part number for your request? A7: No. The requirements are for the Rennishaw to have 50 um resolution with a speedoperations spec of 4 m/s @ 1 um resolution in order to operate with the open sourceParker Motion gantry crane software and interface to the ACR-9030.Q8: Is the cableset between TPM and Compax3 correct?A8: Yes - this is an appropriate cable set that matches the motor and motor controller. Q9: The Omron sensor It appears you have a couple different sensing ranges on it. Imassuming 0-500mm, but would like to confirm. 100mm range would make it much easier. Andthe controller looks to be a typo. I think its a ZX-GTC11. The FTC does not exist andthose two letters are next to each other on the keyboard. 0-500 mm is required for thisapplication. A9: The Government's requirement is 0-500mm. There was a typo in the originalsoliciation and the correct controller number is ZX-GTC11. The due date for receipt of offers is hereby extended to 12:00pm, local time, on July 29,2010.Companies shall provide the information stated in the synopsis/RFQ posted on the NASAAcquisition Internet Service (NAIS) on July 20, 2010. Documents related to thisprocurement are available on the Internet. The Internet site, or URL, for the NASA/JSCBusiness Opportunities home page ishttp://prod.nais.nasa.gov/cgi-bin/eps/bizops.cgi?gr=D&pin=73
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/NASA/JSC/OPDC20220/NNJ10345795Q/listing.html)
- Record
- SN02219138-W 20100729/100727235445-349b9be5fea9028fbb9e8c24956b3660 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |