SOURCES SOUGHT
66 -- Rapid Support Removal System
- Notice Date
- 8/11/2010
- Notice Type
- Sources Sought
- Contracting Office
- US Army, Army Contracting Command, Joint Munitions and Lethality (JM&L) Contracting Center, Picatinny Arsenal, New Jersey 07806-5000
- ZIP Code
- 07806-5000
- Solicitation Number
- W15QKN-10-X-0466
- Response Due
- 8/25/2010
- Archive Date
- 9/24/2010
- Point of Contact
- Tiffany Strickland, Contract Specialist, (973)724-8183
- E-Mail Address
-
Tiffany Strickland
(tiffany.strickland@us.army.mil)
- Small Business Set-Aside
- N/A
- Description
- The U.S. Army, Joint Munitions & Lethality Contracting Center, on behalf of the U.S. Army ARDEC (Armament Research Development Engineering Center), Picatinny Arsenal, NJ is seeking potential firms for a Rapid Support Removal System (RSRS) to be utilized in the processing of Stratasys, Inc. Fused Deposition Modeler (FDM) Prototypes. An RSRS is required to remove Stratasys, Inc. Water Works soluble support structure from an ABS Plastic prototype fabricated in a Stratasys, Inc. FDM 400MC Fused Deposition Modeler. Removal of support structure is accomplished utilizing a combination of heat, water, agitation and Stratasys, Inc. WaterWorks, Soluble release Material P400 SR. The minimum requirements of the RSRS are as follows: Be capable of handling a prototype envelope of 16 inches X 14 inches X 16 inches (w x d x h).Be capable of heating the support removal solution to no more than 150 degrees Fahrenheit.Fully automated with temperature controller and timerDesigned to remove Stratasys, Inc. WaterWorks soluble support structure from an ABS Plastic prototype fabricated in a Stratasys, Inc. FDM 400MC Fused Deposition Modeler utilizing a combination of heat, water, agitation and Stratasys, Inc. WaterWorks, Soluble release Material P400 SR.Equipped with water supply connections and water drain.Equipped with rinse sink for parts rinsing and hand washing.All functions shall be contained within a single unit. Firms/companies are invited to send their responses by providing specifications, brochures, manuals, reports, demonstration video and other technical data as well as identification of current customers and rough indication of pricing. Any pricing data, if available, should be sent at no cost to the U.S. Government. Please provide your responses NO LATER THAN 25 AUGUST 2010. Interested firms should also provide their address, point-of-contact with telephone number, e-mail address, and type of business (Small Business, Large Business, 8a Small Business, Hubzone Small Business, Service Disabled Veteran Small Business). The POC for this action is Mrs. Tiffany Strickland, Contract Specialist, US Army Contracting Command, Joint Munitions & Lethality Contracting Center, CCJM-SW, BLDG. 9, Picatinny Arsenal, NJ 07806-5000, Electronic submittals to be sent to: tiffany.strickland@us.army.mil
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/19acfb6d816d4bc214cb7ad3eee19757)
- Record
- SN02237641-W 20100813/100812000408-19acfb6d816d4bc214cb7ad3eee19757 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |