SOLICITATION NOTICE
67 -- Component Board Visual Placement/Reflow System
- Notice Date
- 8/16/2010
- Notice Type
- Presolicitation
- NAICS
- 333315
— Photographic and Photocopying Equipment Manufacturing
- Contracting Office
- AMCOM Contracting Center - Redstone Installation (AMCOM-CC), ATTN: AMSAM-AC, Building 5303, Martin Road, Redstone Arsenal, AL 35898-5280
- ZIP Code
- 35898-5280
- Solicitation Number
- W31P4Q10T0243
- Response Due
- 8/19/2010
- Archive Date
- 10/18/2010
- Point of Contact
- Whitney Alexander, 2568761232
- E-Mail Address
-
AMCOM Contracting Center - Redstone Installation (AMCOM-CC)
(whitney.a.alexander@us.army.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- The Government anticipates to award a firm fixed price contract for 1 Component Board Visual Placement/Reflow System. The requirements listed are the minimum required for operation of the system. One (1) Component Board Visual Placement/Reflow System shall include: "110V system operation required. "Request Installation and at least one days training for users "Top Reflow Heater minimum of 1200 Watts capacity "Bottom Pre Heat minimum of 600 Watts or equivalent bottom heating "Pneumatic Z-Travel Adjustable Reflow Head Assembly or equivalent "Reflow controller minimum 16 segment minimum 16 On-Board Profiles "Bottom Heater Controller must be Auto Connected to Reflow Profile "Pentium PC with minimum 250Gb Profiles Storage space "Flat Panel Color Monitor minimum 17 inch diagonal "Profile Development and Data Logging Monitoring Software "Minimum of Four (4) Integrated Real Time Thermo Couple Banks "RS232 Computer Interface "CSP & BGA Lens Camera System or equivalent "Component Diagonal Viewer "Dichroic or equivalent Alignment Image Splitter "Automatic Pneumatic Vision Lifting System "Component and Board Vacuum Pick Up System "Minimum of a single axis (preferred) Vertical Placement Drive (VPD) "Board Holder max 11.75 inch x 20 inch with Vacuum, Pressure, Edge Lockdown "X-Y micrometer adjustment base "Theta Adjustable base unit "Vacuum or equivalent Pick Up Assembly "Component Ring and Halogen Lighting 110V operation "Alignment and coupler Chip Minimum of four (4) Preheat Nozzles with the following dimensions: "Preheat 2.00 inch x 2.00 inch "Preheat 1.625 inch x 1.625 inch "Preheat 1.50 inch x 1.50 inch "Preheat 1.30 inch x 1.30 inch Minimum of six (6) Reflow Nozzles with the following dimensions: "Nozzle, 0.30 inch x 0.40 inch "Nozzle, 0.40 inch x 0.45 inch "Nozzle, 0.60 inch x 0.60 inch "Nozzle, 0.80 inch x 0.80 inch "Nozzle, 1.10 inch x 1.10 inch "Nozzle, 1.30 inch x 1.30 inch All responsible sources may submit a quotation which shall be fully considered by the agency under a low price technically acceptable source selection process meeting or exceeding the minimum system requirements. Point of contact is Whitney Alexander, Contract Specialist, telephone 256-876-1232, e-mail whitney.a.alexander@us.army.mil.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/a8e4182b2dcc9748708bc1a263c024a6)
- Place of Performance
- Address: Redstone Test Center ATTN: TEDT-RT-MSM Redstone Arsenal AL
- Zip Code: 35898-5280
- Zip Code: 35898-5280
- Record
- SN02242365-W 20100818/100816235509-a8e4182b2dcc9748708bc1a263c024a6 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |