MODIFICATION
J -- Tiglax Vessel Engine Rebuild-Amendment #1
- Notice Date
- 10/21/2010
- Notice Type
- Modification/Amendment
- Contracting Office
- US Fish & Wildlife Service - R7 Contracting & General Services1011 E. Tudor Rd, Mail Stop 171 Anchorage AK 99503
- ZIP Code
- 99503
- Solicitation Number
- F11PS00010
- Response Due
- 11/1/2010
- Archive Date
- 10/21/2011
- Point of Contact
- Christie VandenDries Contract Specialist 9077863415 christie_vandendries@fws.gov;
- E-Mail Address
-
Point of Contact above, or if none listed, contact the IDEAS EC HELP DESK for assistance
(EC_helpdesk@NBC.GOV)
- Small Business Set-Aside
- Total Small Business
- Description
- This is Amendment #1 to combined synopsis/solicitation number F11PS00010. This amendment clarifies the parts to be replaced, as well as the parts that are to be cleaned, inspected, and if found acceptable to be reinstalled. This amendment also updates the Optional Line Items list. For contractor convenience, the pricing lines have been restated in this amendment. The contractor will provide all materials, labor, and tools necessary to rebuild the engines. REPLACEMENTThe contractor shall, at a minimum the following install new or remanufactured parts:-Gov/Fuel injector pump-Water pump-Oil pump-Cylinder heads-Turbo charger cartridge-Fuel transfer pump-Fuel jumper lines- Cylinder kits (i.e. pistons, connecting rods, piston rings, wrist pins, liners)-Vibration dampers-Engine gasket set-All seals and gasket kits-Main bearings-Rod bearings-Hour/service meter-Tachometer drive and adapters-Air fuel ratio control-Temperature regulators-Lifter locks-Lower timing gears In addition to the replacement parts list above the engine oil cooler (starboard main) also needs to be replaced. Unlike the list above, FWS will provide this particular part for the contractor to install. All other parts must be provided by the contractor. REUSE/REINSTALLClean, Inspect for wear and damage & reinstall if the parts meet with Caterpillar reusable guidelines. If a part does not meet Caterpillar reusable guidelines, it must be replaced. A modification to the contract will be completed to allow for this change. The following parts shall be cleaned, inspected, and if reuseable be reinstalled:Engine oil cooler (port main)-Aftercoolers-Cylinder blocks-Crankshafts-Camshafts-Cam bearings-Head bolts-Spacer plates-Rocker arms-Push rods-Fuel injectors-Upper timing gears-Advance timing unit-Marine gear oil cooler-Hand priming pump-Exhaust studs-After Cooler LINE ITEMS:Please provide a detailed price schedule for the following items: BASE LINE ITEMS Port Engine Rebuild:1.00 JOB$___________________ Starboard Engine Rebuild:1.00 JOB$___________________ Warranty:1.00LS$___________________ OPTIONAL LINE ITEMS: Replace Port Engine Block: 1.00 EA$___________________Extension of period of performance (additional days required to complete):________ Days Replace Starboard Engine Block:1.00 EA$___________________Extension of period of performance (additional days required to complete):________ Days Repair chockfast & align reduction gear 1.00 EA$___________________Extension of period of performance (additional days required to complete):________ Days Replace Engine oil cooler (port main)1.00 EA$___________________Extension of period of performance (additional days required to complete):________ Days Replace Aftercoolers1.00 EA$___________________Extension of period of performance (additional days required to complete):________ Days Replace Cylinder blocks1.00 EA$___________________Extension of period of performance (additional days required to complete):________ Days Replace Crankshafts1.00 EA$___________________Extension of period of performance (additional days required to complete):________ Days Replace Camshafts1.00 EA$___________________Extension of period of performance (additional days required to complete):________ Days Replace Cam bearings1.00 EA$___________________Extension of period of performance (additional days required to complete):________ Days Replace Head bolts1.00 EA$___________________Extension of period of performance (additional days required to complete):________ Days Replace Spacer plates1.00 EA$___________________Extension of period of performance (additional days required to complete):________ Days Replace Rocker arms1.00 EA$___________________Extension of period of performance (additional days required to complete):________ Days Replace Push rods1.00 EA$___________________Extension of period of performance (additional days required to complete):________ Days Replace Fuel injectors1.00 EA$___________________Extension of period of performance (additional days required to complete):________ Days Replace Upper timing gears1.00 EA$___________________Extension of period of performance (additional days required to complete):________ Days Replace Advance timing unit1.00 EA$___________________Extension of period of performance (additional days required to complete):________ Days Replace Marine gear oil cooler1.00 EA$___________________Extension of period of performance (additional days required to complete):________ Days Replace Hand priming pump1.00 EA$___________________Extension of period of performance (additional days required to complete):________ Days Replace Exhaust studs1.00 EA$___________________Extension of period of performance (additional days required to complete):________ Days Replace After Cooler1.00 EA$___________________Extension of period of performance (additional days required to complete):________ Days All other terms and conditions hereby remain unchanged.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOI/FWS/CGSWO/F11PS00010/listing.html)
- Place of Performance
- Address: Homer, Alaska
- Zip Code: 99603
- Zip Code: 99603
- Record
- SN02314642-W 20101023/101021234012-0f63df7cad41e6e08b3263c6bfd05673 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |