SOLICITATION NOTICE
39 -- Glovebox
- Notice Date
- 11/12/2010
- Notice Type
- Presolicitation
- Contracting Office
- US Army, Army Contracting Command, Joint Munitions and Lethality (JM&L) Contracting Center, Picatinny Arsenal, New Jersey 07806-5000
- ZIP Code
- 07806-5000
- Solicitation Number
- W15QKN-11-T-D008
- Response Due
- 11/22/2010
- Archive Date
- 11/22/2011
- Point of Contact
- Tara Henderson, Contract Specialist, (973)724-4672
- E-Mail Address
-
Tara Henderson
(tara.henderson2@us.army.mil)
- Small Business Set-Aside
- N/A
- Description
- The US Army Contracting Command, Joint Munitions & Lethality Contracting Center, Picatinny Arsenal, NJ intends to solicit, negotiate and award a firm fixed price purchase order on a sole source basis to M Braun Inc, 14 Marin Way, Stratham, NH, 03885 for a Labmaster SP glovebox for our thermal battery laboratory. This acquisition is being conducted using simplified acquisition procedures; however, responsible offerors may submit a capability statement, or quotation, which shall be considered by the Government. The NAICS Code for this acquisition is 334516 and the small business size standard is 500 employees. Glovebox must meet the following specifications: must be capable of maintaining an under 1% humidity, be of specialized size and material, be controlled by a specific type of gas purifier and controls. The internal workspace will have the dimensions 1800(W) x 1200(D) x 900(H) [mm], and the material box body will be 304 Stainless Steel. The gas purifier is a 1-filter column and PLC controlled. The circulation blower runs at a maximum of 50 cfm, including water-cooled heat exchanger, the filter column valves are electro-pneumatic. It has PLC controlled main valves, filter column regeneration is PLC-controlled. The box pressure control ranges from -15 to +15 mbar (box can be operated at over or under pressure). The operation panel is a color Touch Panel 5.7''. The front and back windows are polycarbonate with hard coating (chemical and scratch resistant). There are 8 glove port feedthroughs with a diameter 220mm including gloves (Butyl). The Main antechamber has the following dimensions: d=390 mm, l=600 mm, including sliding tray inside. The right side wall has a push-button Evacuation/Refill. An automatic box purging unit with flow control (200 l/min), and a Vacuum pump (10.9 cfm) including oil mist filter. There should be 2 hanging shelves, and electrical feedthrough. There should also be 8 Flanges DN40 for installation of feedthroughs, and 2 HEPA H13 dust filters on the gas inlet and outlet. The large antechamber should have automatic door lock assembly. The mini antechamber should have a 150 mm diameter and 400 mm length, mounted on the right end panel. There should be an H2O analyzer that is PLC controlled and measures the range 0 to 500 ppm. There should also be an O2 analyzer that is PLC controlled and measures the range 0 to 1000 ppm. There should be 2 feedthroughs gas/vacuum that is 3/8', and a 180 mm diameter internal glove port cover. Delivery must be within 30 days of award. All inquiries and submissions shall be received by November 22, 2010 via email only to the point of contact for this requirement, Tara Henderson, AMSCC-CCJM-JA, Bldg. 10, Picatinny Arsenal, NJ 07806-5000. Email tara.henderson2@us.army.mil.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/886e120d0c333c80341e5e9b7963cc4e)
- Record
- SN02326891-W 20101114/101112233821-886e120d0c333c80341e5e9b7963cc4e (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |