SOURCES SOUGHT
58 -- FMS Case TH-B-WFP (Thailand)
- Notice Date
- 1/5/2011
- Notice Type
- Sources Sought
- Contracting Office
- CECOM Contracting Center (CECOM-CC), ATTN: AMSEL-AC, Building 1208, Fort Monmouth, NJ 07703-5008
- ZIP Code
- 07703-5008
- Solicitation Number
- MARKET-SURVEY-5017-1
- Response Due
- 1/19/2011
- Archive Date
- 3/20/2011
- Point of Contact
- Savino Sica, 732-532-5071
- E-Mail Address
-
CECOM Contracting Center (CECOM-CC)
(savino.sica@us.army.mil)
- Small Business Set-Aside
- N/A
- Description
- FOR MORE INFORMATION PLEASE CONTACT NICK CIUFO, EMAIL nicholas.ciufo@us.army.mil OR John Padre, EMAIL john.padre@us.army.mil **You must respond NO LATER than the Respond Date and Time The US ARMY CECOM LCMC intends to acquire the following: 120 each non-standard commercial export PVS-14 GEN III NTE 1400 FOM Monocular NVG System. Each system shall include one (1) each of the following: Helmet Mount Assembly for the PASGT Helmet, Medium and Thick Brow Pads, Eye Guard, Operator's Manual, Demist Shield Assembly, Sacrificial Window Assembly, Carrying Case, Shoulder Strap, Lens Paper, Helmet Mount Adapter for the PASGT Helmet Salient Characteristics: Figure of Merit must not exceed 1400 Resolution (minimum): 57 lp/mm Signal to noise ratio (minimum): 21 Magnification: 1X 0.03 System Distortion: Less than 3% Range Focus: 25 cm to infinity Diopter Adjustment: +2 to -6 diopters Eye Relief: 25 mm (1 in) Field of View: 40 ( 2 ) System Brightness Gain: Adjustable from 25 to more than 3,000 Operating Temperature: -51 C to +49 C Storage Temperature: -51 C to +85 C Weight of Monocular with eyecup, lens cap, neck cord and battery: 355 grams Size: 11.4 cm L x 5.1 cm W x 5.7 cm H (4.5 in L x 2 in W x 2.2 in H) Mount: Weapon Mount Adapter for Picatinny Rail (MIL-STD-1913/STANAG 2324) Required manufacturer logo/stamp for identification on each image intensifier tube Data Sheet for each image intensifier tube with serial number: Yes Must not have a wrap around gated power supply with autogating feature. Warranty (minimum): 1 year 120 each non-standard commercial export Helmet Mount for the PASGT Helmet to support the PVS-14 120 each non-standard commercial export 3x Afocal Lens to Support the PVS-14 Monocular NVG System Salient Characteristics: 3X magnification attachable lens with protective lens cover Lightweight: 6.68 oz (Lens, Cover & Adapter) Compatible with the PVS-14 Durable soft carrying case Attaches to objective lens through adapter snap-on or threaded onto 1X objective 6 each non-standard PVS-26 GEN III NTE 1400 FOM Universal Night Sight. Each PVS-26 shall include one (1) each of the following: Shroud Wrap, Lens Cover, Base Adjustment Wrenches, Lens Cleaning Kit, KAC Quick attached detach 1913 mount, AA Battery, Hard Carrying Case, Technical Manual. Salient Characteristics: Resolution (minimum) 57 lp/mm Signal to Noise Ratio (minimum): 21 Magnification: 1X (Unity) Field of View: 9 Objective Lens: 120mm Refractive Telephoto Range of Focus: 20 Meters to Infinity Boresight Accuracy: >.5 MOA of the day scope point of impact Boresight Retention: >.5 MOA or better over 300 rounds (.300 WM) Boresight Adjustment: None Required Battery Type: One (1) AA Batteries or (1) DL123 type Weight: 3 lbs 6 oz's with Battery & Lens Cap Length: 9.5" Diameter: 3.0" OD Finish: Black, Matte Finish, Corrosion Resistant Mount: KAC 26597 for Quick Attach/Detach to MIL-STD-1913 rail or equivalent mounting surface Waterproof: 3 ft for 4 hours Warranty: 1 year Weapons Certification: up to and including.50 Caliber rifles Performance Model Range Estimates: Recognize a standing man: Starlight: >800 m Moonlight: >1000 m Detect A Vehicle: Starlight: >1000 m Moonlight: >1500 m Required manufacturer logo/stamp for identification on each image intensifier tube Data Sheet for each image intensifier tube with serial number: Yes Must not have a wrap around gated power supply with autogating feature. Warranty (minimum): 1 year Information/Requirements: 1. If you are a reseller/distributor you MUST disclose the manufacturer of the Image Intensifier Tubes. 2. You MUST state delivery ARO of all HARDWARE. 3. If you are a reseller/distributor you MUST disclose the manufacturer of ALL ITEMS listed. 4. If you are a reseller/distributor you MUST provide certification that Night Vision Tubes are NOT Russian made. 5. You MUST reference the FMS case designator on your formal solicitations. 6. Image Intensifier Tube data sheets for each tube with serial numbers shall be sent to CECOM SAMD point of contact after contract award 8. There will be a potential call for an incoming inspection by DCMA to check tubes and tube housings 9. A quality system on tubes and tube housings will be requested after contract award. Respond to My Attention by 11 AM Eastern on 19 January 2011 EMAIL: nicholas.ciufo@us.army.mil, john.padre@us.army.mil S Army C-E LCMC Acquisition Center - DAAB07 POPADDRESS: US Army C-E LCMC Acquisition Center, ATTN: AMSCC-CCCE-CAD 21005 POPCOUNTRY: US
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/182c10d3e030b297c50ac548fdaaad7d)
- Place of Performance
- Address: CECOM Contracting Center (CECOM-CC) ATTN: AMSEL-AC, Building 1208 Fort Monmouth NJ
- Zip Code: 07703-5008
- Zip Code: 07703-5008
- Record
- SN02355044-W 20110107/110105234337-182c10d3e030b297c50ac548fdaaad7d (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |