MODIFICATION
20 -- Helo 400HZ Power Supply Cable for CGC 270 WMECs
- Notice Date
- 1/25/2011
- Notice Type
- Modification/Amendment
- NAICS
- 336611
— Ship Building and Repairing
- Contracting Office
- Department of Homeland Security, United States Coast Guard (USCG), USCG Surface Forces Logistics Center (SFLC) Procurement Branch 1, 300 East Main Street, Suite 600, Norfolk, Virginia, 23510-9102, United States
- ZIP Code
- 23510-9102
- Solicitation Number
- HSCG80-11-Q-P45H02
- Archive Date
- 1/18/2012
- Point of Contact
- Tara M Holloway, Phone: 757-628-4754, Arlene V Woodley, Phone: (757) 628-4645
- E-Mail Address
-
tara.m.holloway@uscg.mil, Arlene.V.Woodley@uscg.mil
(tara.m.holloway@uscg.mil, Arlene.V.Woodley@uscg.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- Presolicitation 1/25/2011 USCG 270 FOOT MEDIUM ENDURANCE CUTTERS (WMEC 901-913) HELO 400 HZ POWER SUPPLY CABLE INSTALLATIONS FOR DOCKSIDE REPAIRS This procurement is a 100% Total Business Set-Aside. All responsible Small Business Concerns may submit an offer, which shall be considered by the U.S. Coast Guard. The solicitation will be issued electronically on the FEDBIZOPPS web page on or about February 3, 2011, at http://www/eps/gov/. Please sign up for the Auto Notification Service to receive e-mail from FEDBIZOPPS when an action is taken under this solicitation. THIS COMMERCIAL ITEM REQUIREMENT IS SET-ASIDE FOR 100% TOTAL SMALL BUSINESS CONCERNS AND WILL BE EVALUATED USING PAST PERFORMANCE AS THE MOST IMPORTANT EVALUATION FACTOR. The Small Business Size Standard is 1,000 employees. The NAICS Code is 336611. The place of performance will be at the cutters locations listed below. The contract shall provide and furnish all labor, material and equipment necessary to perform the scope of the acquisition: (1) Provide Helo 400 HZ Power Supply Cable and Installation, on thirteen (13) USCG 270 Foot Medium Endurance Cutters (WMEC 901-913). (2) Travel and Per Diem to install all thirteen (13) 400 HZ Cables onboard the cutters at the different cutter locations (See attached list of locations and period of performance. All work will be performed at the vessels home pier. These vessels home piers are located: (1) Portsmouth, VA, (2) Kittery, ME, (3) Boston, MA, (4) Key West, FL. The performance period varies, with a start date on or about 22 June 2011. Trained welders, who have been certified by the applicable regulatory code performance qualification procedures, shall accomplish all welding and brazing. All reference documents are available for viewing at 300 East Main Street, Suite 500, Norfolk, VA 23510-9102. Drawings are now available on CD-ROM. The CD-ROM sets are available for all cutters and will be free of charge to contractors upon request [ten days from solicitation issuance]. SFLC must have ten (10) days advance notice to complete a CD-ROM set of drawings. The CD-ROM(s) contain WINDOWS compliant raster/vector formats (e.g.*.DWF, etc). Drawings are still available in hardcopy; however, a non-refundable charge of $150.00 is required in the form of a certified check or money order made payable to the U.S. Coast Guard for requested drawings. All responsible sources may submit an offer, which shall be considered by the United States Coast Guard. For information concerning this acquisition contact the Contracting Official listed above.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DHS/USCG/COUSCGMLCA/HSCG80-11-Q-P45H02/listing.html)
- Record
- SN02365853-W 20110127/110125234236-2139c968197784e1b490dee842e580ac (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |