MODIFICATION
45 -- Winterization Plumbing Kit/Items
- Notice Date
- 8/16/2011
- Notice Type
- Modification/Amendment
- Contracting Office
- Camp Marmal, APO, 09368
- ZIP Code
- 09368
- Solicitation Number
- F3UUBG1208A004
- Response Due
- 8/23/2011
- Archive Date
- 2/19/2012
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- Total Small Business
- Description
- AMENDMENT NOTICE:This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, in conjunction with FAR 13.5, as applicable, and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued.The solicitation number is F3UUBG1208A004 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-53. The associated North American Industrial Classification System (NAICS) code for this procurement is 423720 with a small business size standard of 100.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2011-08-23 17:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Multiple shipping information. The U.S. Army ACC Rock Island - Rock Island Contracting Center requires the following items, Brand Name or Equal, to the following: LI 001, - Booster System, Variable Speed, Multi-Stage Pump, 1 HP, 1 Phase, Voltage 115, 4.2 Amps, Inlet 1 1/4 In., Outlet 1 In., Motor RPM 3450, Service Factor 1.15, Max. Liquid Temp. 120 F, Stages 4, 20 GPM @ 20 PSI, 20 GPM @ 30 PSI, 20 GPM @ 40 PSI, 15 GPM @ 60 PSI, 5 GPM @ 80 PSI, Max. Pressure 80 PSI, Max. Case Pressure 120 PSI, Max. Dia. Solids 1/16 In., Pressure Switch Setting 50 PSI.- MFR: GOULDS - Part# 1151AB21HM1E2D0 or Equal, 20, EA; LI 002, - Swing Check Valve, Material of Construction Brass, Size 1 1/4 In, NPT Connection, Length 3.23 In., Top of Handle to Inlet Center 2.17 In., Rated For 200 PSI, Max. Temp. 180 F- MFR: NIBCO - Part# TI3 1 ? or Equal, 20, EA; LI 003, - Two Piece Ball Valve, FNPT Connection, Max. Pressure 600 psi WOG, 150 psi WSP, Full Port, Material of Construction Brass, Seats PTFE, Stem Material Brass, Handle Lever, Standards UL, CSA- APOLLO - Part# 94A10601 or Equal, 20, EA; LI 004, - Ball Valve, 375 True Union, Socket/Threaded Connection, Full Port, Material of Construction PVC, Seats PTFE, Seals EPDM, Stem Blowout Proof, Handle Ergonomic, Standards ASTM 1970-01- MFR: GF PIPING SYSTEMS - Part# 161375005 or Equal, 20, EA; LI 005, - Two Piece Ball Valve, FNPT Connection, Max. Pressure 600 psi WOG, 150 psi WSP, Full Port, Material of Construction Brass, Seats PTFE, Stem Material Brass, Handle Lever, Standards UL, CSA- MFR: APOLLO - Part# 94A10501 or Equal, 20, EA; LI 006, - Ball Valve, 375 True Union, Socket/Threaded Connection, Full Port, Material of Construction PVC, Seats PTFE, Seals EPDM, Stem Blowout Proof, Handle Ergonomic, Standards ASTM 1970-01- MFR: GF PIPING SYSTEMS - Part# 161375004 or Equal, 20, EA; LI 007, - Union, Pipe Size 1 1/4 In, Slip Socket Connection, Material of Construction PVC, Schedule 80, Max Temp 140 Deg F, Color Gray, Standards Conforms To Requirements Of ASTM P.1784, NSF-14 Certified- MFR: GF PIPING SYSTEMS - Part #897-012 or Equal, 20, EA; LI 008, - Y-Strainer, Size 1 1/4 In, True Union Connection, Screen Size 1/32 In, Max. Pressure 150 PSI, Blow-off Port 1 1/4 In NPT, Material of Construction PVC, Width 2.94 In, Height 5.85 In, Screen PVC, Viton Seal- MFR: HAYWARD- Part# YS10125TU or Equal, 20, EA; LI 009, - Y Strainer, Size 1 1/4 In, FNPT Connection, Screen Size 16.2 In, Max Pressure 400 At 150 Deg F PSI, Blow-off Port 3/4 In NPT, Material of Construction Bronze, Width 5 1/8 In, Screen Stainless Steel, PTFE Seal, Standards UL Listed- MFR: APOLLO- Part# 59006P2 or Equal, 20, EA; LI 010, - Porcelain Lamp Holder, Medium Base, 2 Terminal Screws, 660 Watts Maximum, 250 Volts, Mounts Directly to 3 1/4 or 4 Inch Ceiling Box, Top Wired- MFR: LEVITON- Part# 9875 or Equal, 20, EA; LI 011, - Edison Screw-In Infrared Heater Bulbs, Metamorphing Rose to Gray Ceramic E-Mitter, For Use With 4TDE6, Typical Application Heating Laboratory Samples and Specimens, Length 105 mm, Dia. 75 mm, Voltage 120, 60 Watts- MFR: TEMPCO- Part# CRR00005 or Equal, 20, EA; LI 012, - Preassembled Pipe Heat Cable, Voltage Rating 120 Volts, Heater Length 50 Feet, 2 1/2 Inches Pipe Diameter, 250 Watts on Metal, 165 Watts on PlasticPlastic, When Used in Wet Locations Install Ground Fault Circuit- MFR: RAYCHEM- Part# W51-50P or Equal, 40, EA; LI 013, - Single Gang Box Ceiling Fixture Plaster Ring, Capacity 3.00 Cubic Inches, Center Blanked, with Tapped Ears, Mounts on 2 3/4 Inch Centers, Material Galvanized Zinc, Raised 1/2 Inch, Length 4 Inches, Width 4 Inches- MFR: RACO- Part# 767 or Equal, 120, EA; LI 014, - Straight Blade Plug, Current Rating 15 Amps, Voltage Rating 125 Volts, Power Rating 1/2 HP, NEMA Configuration 5-15P, Number of Poles 2, Number of Wires 3, Grade Industrial, Color Black/White, Nylon- MFR: LEVITON- Part# 5266-C or Equal, 100, EA; LI 015, - Cord Connector, Current Rating 15 Amps, Voltage Rating 125 Volts, NEMA Configuration 5-15R, Number of Poles 2, Number of Wires 3, Grade Industrial, Color Black/White, Nylon- MFR: LEVITON- Part# 5269-C or Equal, 100, EA; LI 016, - All Purpose Cord, Conductor Gauge 16/3, Maximum Voltage 300, Maximum Current Rating 13 Amps, Nominal OD 0.350 Inch, Spool Length 250 Feet, Cord Type SJOOW, Color Yellow, Stranded Copper Conductors- MFR: CAROL- Part# 02005.15.05 or Equal, 2, EA; LI 017, - Shipping, direct air shipment to Afghanistan:- Task Force Hammer- 577 EPBS- APO, AE 09354, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, U.S. Army ACC Rock Island - Rock Island Contracting Center intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. U.S. Army ACC Rock Island - Rock Island Contracting Center is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. Offeror must be registered in the Central Contractor Registration (CCR) database before an award can be made to them. If the offeror is not registered in the CCR, it may do so through the CCR website at http://www.ccr.gov. Delivery must be made within 30 days or less after receipt of order (ARO). The offeror must provide within its offer the number of days - not to exceed 30 - required to make delivery after it receives a purchase order from the buyer. It is also required any contractor doing business with the government under contract be registered in ORCA, website url below: https://orca.bpn.gov/ Sellers must read and comply with all specifications, shipping information, and terms outlined in the attachments. BIDS are to be submitted on the FedBid ONLY or they will not be accepted.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/6da387a7a373ed145bf58359137da52e)
- Place of Performance
- Address: Multiple shipping information.
- Zip Code: Multiple
- Zip Code: Multiple
- Record
- SN02537099-W 20110818/110817000546-6da387a7a373ed145bf58359137da52e (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |