Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY ISSUE OF SEPTEMBER 24, 2011 FBO #3591
MODIFICATION

66 -- HIGH SPEED DATA ACQUISITION RF CAPTURE TURNKEY SYSTEM

Notice Date
9/22/2011
 
Notice Type
Modification/Amendment
 
NAICS
334220 — Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing
 
Contracting Office
NASA/Goddard Space Flight Center, Code 210.M, Greenbelt, MD 20771
 
ZIP Code
20771
 
Solicitation Number
NNG11405405Q
 
Response Due
9/26/2011
 
Archive Date
9/22/2012
 
Point of Contact
Rogenia Burton-Pendergast, Contracting Officer, Phone 301-286-5093, Fax 301-286-5373, Email Rogenia.M.Burton-Penderga@nasa.gov
 
E-Mail Address
Rogenia Burton-Pendergast
(Rogenia.M.Burton-Penderga@nasa.gov)
 
Small Business Set-Aside
Total Small Business
 
Description
THIS NOTICE CONSTITUTES AMENDMENT NO. ONE (1) TO THE COMBINED SYNOPSIS/RFQ FORHIGH SPEED DATA ACQUISITION RF CAPTURE TURNKEY SYSTEM.Companies shall acknowledge allamendment(s) in their quote. This notice serves as the official amendment to subjectsynopsis/RFQ and a written amendment will not be issued.The purpose of this amendment is to respond to vendor questions. The due date for receipt of offers IS NOT extended.Q1. The technical specification state that sampling rate needs to be 3GHz, but that thebandwidth needs to be 400MHz. However, the 3GHz ADC would give them a 3GHz bandwidth.. I'm not sure which spec to follow, or if I am missing something.A1. We must have an input bandwidth that is > 200MHz. This means the sampling rateneeds to be > 400 MHz.Q2. what is the center frequency of the RF signal to be recorded/captured? A2. 1413.5Q3. What are the expected power (or voltage) levels of the RF signal to berecorded/captured?A3. -30dBm-->0dBmQ4. What are the expected environmental operating conditions: (e.g. lab, hangar,airborne, seaborne, etc.)A4. AirborneQ5. Is it acceptable to use an A/D sample rate of less than 3GHz if the system designincorporates an RF to IF Downconverter before the A/D converter? A5. We must have an input bandwidth that is > 200MHz. This means the sampling rateneeds to be > 400MHz.Q6. Is there any NRE that would be acceptable in this bid? A6. Yes, you may break out the NRE for engineering, assembly, and testing with thedevelopment of this unit, however selection and award will be based on the lowest priced,technically acceptable quoter.Companies shall provide the information stated in the synopsis/RFQ posted on the NASAAcquisition Internet Service (NAIS) on September 12, 2011. Documents related to thisprocurement are available over the Internet. These documents reside on a World Wide Web(WWW) server which may be accessed using a WWW browser application. The Internet site, orURL, for the NASA/GSFC Business Opportunities home page ishttp://prod.nais.nasa.gov/cgi-bin/eps/bizops.cgi?gr=D&pin=51
 
Web Link
FBO.gov Permalink
(https://www.fbo.gov/spg/NASA/GSFC/OPDC20220/NNG11405405Q/listing.html)
 
Record
SN02588276-W 20110924/110922235454-281eb78df921747b05345de2c0d2fc4f (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.