Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY ISSUE OF JANUARY 21, 2012 FBO #3710
SOLICITATION NOTICE

19 -- Pontoons

Notice Date
1/19/2012
 
Notice Type
Presolicitation
 
NAICS
336612 — Boat Building
 
Contracting Office
Department of the Army, U.S. Army Corps of Engineers, USACE District, St. Paul, Attn: CEMVP-CT, 180 East Fifth Street, St. Paul, Minnesota, 55101-1678, United States
 
ZIP Code
55101-1678
 
Solicitation Number
W912ES-12-R-0004
 
Point of Contact
Jesse Onkka, Phone: 6512905444, Christopher G. Dake, Phone: 6512905415
 
E-Mail Address
Jesse.L.Onkka@usace.army.mil, christopher.dake@us.army.mil
(Jesse.L.Onkka@usace.army.mil, christopher.dake@us.army.mil)
 
Small Business Set-Aside
Total Small Business
 
Description
The U.S. Army Corps of Engineers, St. Paul District, is in need of pontoons for the Dredge Goetz floating pipeline. Under the subsequent contract the vendor shall deliver a minimum of eight (8) replacement pontoons with the potential for an additional thirty-two (32). Both new and used pontoons will be considered. The vendor will be determined based on the overall best value to the Government. Products for Vendor Submission pontoons submitted in response to this solicitation can be of any design that conforms to the following specific, salient characteristics: •Ø Beam (width) of 10 feet. •Ø Length no less than 40 feet, no more than 45 feet. •Ø Hull depth no less than 4 feet, no more than 5 feet. •Ø Full rakes on both ends of all pontoons. •Ø Plate thickness no less than 1/4 inch, no more than 5/16 inch. •Ø Minimum of one (1) bulkhead section allowing two (2) water-tight compartments. •Ø Minimum of one (1) flush-mounted, deck hatch of 18 inch diameter per compartment. •Ø Minimum allowable deck loading of 500 lbs per square foot (PSF) •Ø Exterior coating (primed and painted) of hull, sides and deck of pontoons. •Ø Pontoon hull and side coating should be standard black coating of at least 8 mil thickness. •Ø Pontoon deck should be standard deck red coating. •Ø Pontoon interior compartment coating should be standard white coating. •Ø All pontoon surfaces (exterior and interior) shall be free from rust. •Ø Structural steel components to be of standard Grade A-36 steel or higher. •Ø Each pontoon shall come equipped with four (4), Industry standard 24 inch kevels, one on each corner. •Ø Each pontoon shall come equipped with two (2) rub-rails extending the full length of each side. Rub-rails shall be made of steel channel sections of size 2 inch by 6 inch by 1/2 inch (2" x 6" x ½"). •Ø For new pontoon submissions, both digital and hardcopy versions of the shop/design drawings will be provided as part of the proposal. •Ø For new pontoon submissions, both digital and hardcopy versions of engineering/design calculations will be provided as part of the proposal. •Ø Representative digital photographs of new pontoons shall be included as reference.
 
Web Link
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/COE/DACA37/W912ES-12-R-0004/listing.html)
 
Place of Performance
Address: Fountain City Service Base, 431 North Shore Drive, Fountain City, Wisconsin, 54629, United States
Zip Code: 54629
 
Record
SN02657259-W 20120121/120119234432-0a5d74cce1c25570005286d58d66c9c5 (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.