SOLICITATION NOTICE
39 -- Mahoning Gantry Crane Control - Miscellaneous Modifications
- Notice Date
- 2/6/2012
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 333923
— Overhead Traveling Crane, Hoist, and Monorail System Manufacturing
- Contracting Office
- USACE District, Pittsburgh, 1000 Liberty Avenue, W.S. Moorhead Federal Building, 22nd Floor, Pittsburgh, PA 15222-4186
- ZIP Code
- 15222-4186
- Solicitation Number
- W911WN12T0010
- Response Due
- 2/21/2012
- Archive Date
- 4/21/2012
- Point of Contact
- Michelle Anderson, 4123957417
- E-Mail Address
-
USACE District, Pittsburgh
(michelle.l.anderson@usace.army.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The work shall consist of the following: 1. Replace the existing crane travel and hoist motion control switches (2 switches total) on gantry crane no. 2. The new switches shall consist of a handle operated cam switch mechanism in a NEMA 1 rated surface mounted housing with electrical knockouts, using 5 speed position handle with spring return, mounted on stainless steel operating rod. The lever shall be supported in the housing on oil-impregnated bushings, and operating plungers shall be fiber reinforced plastic equipped with location detents corresponding to cam development and speed points. The control switches shall be provided with a deadman. The crane and hoist switches provided shall be designed for crane use as manufactured by Hubbell Industrial Controls or approved equal. The Contractor shall provide wiring, conduit, mounting boxes, and any hardware and labor necessary to facilitate the installation on the hoist and travel switches. The switches shall be mounted at the same elevation as the existing. The control switches shall be installed in accordance with the manufacturer's instructions. The existing switches shall be disposed of by the Contractor. 2. Replace door mounted disconnect switch on crane control panel. The disconnect switch shall be replaced with a NEMA-style door-mounted disconnect switch including rotary handle operating mechanism and fuse clip kit. The disconnect switch shall be operated by cast metal handle operator that is lockable in the off position. Provide 70 amp fuses for the new switch and a set of spares. The disconnect switch shall be as manufactured by Square D (D10) or approved equal. 3. Refurbish Gantry Crane Hoist Brake The hoist brake assembly and drum shall be cleaned, inspected, serviced and certified by a crane maintenance company to insure proper operation. Servicing shall include replacing the brake shoes; resurfacing the drum; inspecting, lubricating and adjusting the spring and linkage; and testing for proper solenoid function. The existing hoist brake is a P&H (Harnischfeger Corp) type 9-SA-175. It is floor mounted, spring set and released by a 60 cycle, 440 volt solenoid. The brake has continuous torque rating of 175 ft-lbs. A written solicitation is attached for your convenience.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/COE/DACA59/W911WN12T0010/listing.html)
- Place of Performance
- Address: Mahoning Creek Lake 145 Dam Site Road New Bethlehem PA
- Zip Code: 16242
- Zip Code: 16242
- Record
- SN02668428-W 20120208/120206234508-fb6ece06dee247398a9a3405a537d481 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |