MODIFICATION
58 -- Sources Sought for Radios and ancillary parts
- Notice Date
- 2/7/2012
- Notice Type
- Modification/Amendment
- Contracting Office
- ACC-APG - Aberdeen Division B, HQ CECOM CONTRACTING CENTER, 6001 COMBAT DRIVE, ABERDEEN PROVING GROU, MD 21005-1846
- ZIP Code
- 21005-1846
- Solicitation Number
- MARKET-SURVEY-5205-1
- Response Due
- 2/10/2012
- Archive Date
- 4/10/2012
- Point of Contact
- Tineka C. Davis, 443-861-5438
- E-Mail Address
-
ACC-APG - Aberdeen Division B
(tineka.c.davis.civ@mail.mil)
- Small Business Set-Aside
- N/A
- Description
- FOR ALL INFORMATION PLEASE CONTACT: Larran Frasier, 443-395-7005 larran.w.frasier.ctr@mail.mil The U.S. Government is seeking sources of supply for Radios and Ancillary Parts The purpose of this Market Research is to identify interested sources that can provide/manufacture and deliver the required Radios and Ancillary Parts contained in the attached specifications document. Please provide product specification literature, technical data sheets, brochures and links (URLs) to Web sites containing the information if available. Responses are required by 10 February 2012. Response date was 8 February but has been extended. POC: Larran Frasier 443-395-7005 larran.w.frasier.ctr@mail.mil CECOM POC Radios with Type 1 Encryption Radio typeQTYDescription(work as) 100 WATTHF RADIO 2Vehicle,Base Station (fixed) 20 WATT HF RADIO14Vehicle, Man pack 50 WATT VHF RADIO9Vehicle, Jerk& Run O 10 WATTIRAD VHF 19Vehicle, Jerk& Run RADIO 10 WATT VHF 10Hand Held V/UHF RADIO 10 WATT7Hand Held V/UHF RADIO 50 WATT6Vehicle, Jerk& Run 5 WATT HF RADIOV7Hand Held The Radios should be delivered with all ancillaries and components The technical specifications for the Radios follow: MINIMUM VHF/UHF (50 W) RADIO SPECIFICATION Vehicle 1. Frequency Range: Total range 30 - 512 MHZ VHF LOW: 30 - 90 MHZ VHF HIGH: 90 - 225 MHZ UHF: 225 - 512 MHZ 2. Radio Configuration: Vehicle 3. RF Output Impedance: 50, unbalanced 4. Transmission Mode: VHF LOW: FM, FSK, TCM, CVSD or equivalent. VHF HIGH : FM, FSK, ASK, AM, GMSK, CVSD or equivalent UHF:FM, FSK, ASK, AM, GMSK, CVSD or equivalent 5. Input Power: 20 - 32 VDC 6. Power Output: 50 watt (selectable power setting) 7. The radio shall be protected from (short, open) CCT antenna, reverse polarity, over voltage and over current 8. Frequency Stability: 0.5 ppm 9. FM Frequency Deviation: 5 KHZ to 8 KHZ 10. AM Channel Spacing: 8.33, 12.5, 25 KHZ 11. Harmonic Suppression: 50 dBc 12. Spurious Suppression: 50 dBc 13. FM Sensitivity: FM: -118 dBm @ 10 dB SINAD or better AM: -110 dBm @ 10 dB SINAD with 75% modulation or better 14. IF Rejection: 60 dB 15. Squelch: Off / Noise / Tone / Digital 16. ECCM: The radio shall have ECCM capability using frequency hopping (Quicklook 1A, Quicklook 2) and the ability to program unlimited hopping band frequencies in the specified VHF/UHF ( 30 - 512 MHZ ). And shall be compatible with the waveform (Jordan code) used by RJAF Radios 17. Encryption: capable for Voice / Data in all mode (built - in) 18. COMSEC: Type 1 19. Data Interface: USB2, SYNC, ASYNC, and Ethernet or equivalent 20. The Radio shall be IP- based and have wireless IP capabilities 21. The Radio shall have an embedded GPS and situational awareness capabilities. 22. The Radio shall have Remote control capability. 23. The Radio shall have (selective /Directed) calling (radio - radio, radio - many) capabilities 24. (BITE) Built - In - Test Equipment (test down to unit level) 25. Software shall be upgradable and available for: Basic setting, Data transfer and Tactical chatting 26. Simultaneous voice and data (SIVD) 27. Environmental ( As per MIL - STD - 810 F ) : ( operating temperature, shock, vibration, immersion, humidity, sand / dust ) MINIMUM VHF (50 W) RADIO SPECIFICATION Vehicular 1. Frequency Range : 30 - 88 MHZ 2. Radio Configuration: Vehicular, Jerk& Run 3. RF Output Impedance: 50, unbalanced 4. Transmission Mode: FM, FSK, (ASK,GMSK, CVSD, TCM) or equivalent 5. Input Power: 20 - 32 VDC 6.Power Output: 50 watt (selectable power setting ) 7.The radio shall be protected from (short, open) CCT antenna, reverse polarity, over voltage and over current 8.Frequency Stability: 0.5 ppm 9.Frequency Deviation: 5 KHZ to 8 KHZ, or better 10.Harmonic Suppression: 50 dBc or better 11.Spurious Suppression: 50 dBc or better 12.FM Sensitivity: -112 dBm @ 12 dB SINAD or better a.-118 dBm @ 10 dB SINAD or better 13.IF Rejection: 60 dB or better. 14.Squelch: Off / Noise / Tone / Digital. 15. ECCM: The radio shall have ECCM capability using frequency hopping (Quicklook1A, Quicklook2) and the ability to program unlimited hopping band frequencies in the specified VHF ( 30 - 88 MHZ ). 16.Encryption: capable for Voice / Data in all mode (built-in ) 17.COMSEC: Type 1 18.Data Interface: USB2, SYNC, ASYNC, and Ethernet or equivalent 19.The Radio shall be IP- based and have wireless IP capabilities 20.The Radio shall have an embedded GPS and situational awareness capabilities 21.The Radio shall have Remote control capability 22.The Radio shall have ( selective /Directed ) calling ( radio- radio, radio - many ) capabilities 23. ( BITE ) Built - In - Test Equipment ( test down to unit level ) 24.Software shall be upgradable and available for : Basic setting, Data transfer and Tactical chatting 25.Simultaneous voice and data (SIVD ) 26.Environmental ( As per MIL - STD - 810 F ): a.( operating temperature, shock, vibration, immersion, humidity, sand / dust ) MINIMUM VHF (5 W) RADIO SPECIFICATION Hand Held (HH) 1.Frequency Range : 30 - 88 MHZ 2.Radio Configuration :Hand Held (HH) 3.RF Output Impedance : 50, unbalanced 4.Transmission Mode : FM, FSK, (ASK,GMSK, CVSD, TCM) or equivalent 5.Input Power : High capacity lithium - Ion rechargeable battery (Not less than 2000 mAH) with single unit charger 6.Power Output : 5 watt (selectable power setting ) 7.The radio shall be protected from ( short, open) CCT antenna and also reverse polarity, over voltage and over current (In Case of Jerk & Run Configuration ) 8.Frequency Stability : 0.5 ppm 9.Frequency Deviation : 5 KHZ to 8 KHZ, or better 10.Harmonic Suppression : 50 dBc or better 11.Spurious Suppression : 50 dBc or better 12.FM Sensitivity : -112 dBm @ 12 dB SINAD or better -118 dBm @ 10 dB SINAD or better 13.IF Rejection : 60 dB or better 14.Squelch : Off / Noise / Tone / Digital 15.ECCM :The radio shall have ECCM capability using frequency hopping (Quicklook 1A, Quicklook 2) and the ability to program unlimited hopping band frequencies in the specified VHF (30 - 88) 16.Encryption: capable for Voice / Data in all mode (built -in) 17.COMSEC: Type 1 18.Data Interface: USB2, SYNC, ASYNC, and Ethernet or equivalent 19.The Radio shall be IP- based and have wireless IP capabilities 20.The Radio shall have an embedded GPS and situational awareness capabilities 21.The Radio shall have Remote control capability 22.The Radio shall have (selective /Directed ) calling (radio- radio, radio - many) capabilities 23. ( BITE ) Built - In - Test Equipment (test down to unit level) 24.Software shall be upgradable and available for :Basic setting, Data transfer and Tactical chatting 25.Simultaneous voice and data (SIVD) 26.Environmental ( As per MIL - STD - 810 F): a.( operating temperature, shock, vibration, immersion, humidity, sand / dust ) MINIMUM VHF (10 W) RADIO SPECIFICATION Operates in Vehicle 1.Frequency Range : 30 - 88 MHZ 2.Radio Configuration : Wheeled Vehicle, man pack 3.RF Output Impedance : 50, unbalanced 4.Transmission Mode : FM, FSK, (ASK,GMSK, CVSD, TCM) or equivalent 5.Input Power: Suitable power input for Wheeled Vehicle and high capacity rechargeable battery with charger for man pack (MP) 6.Power Output : 10 watt (selectable power setting ) 7.The radio shall be protected from ( short, open) CCT antenna, reverse polarity, over voltage and over current 8.Frequency Stability : 0.5 ppm 9.Frequency Deviation : 5 KHZ to 8 KHZ or better 10.Harmonic Suppression : 50 dBc or better 11.Spurious Suppression : 50 dBc or better 12.FM Sensitivity : -112 dBm @ 12 dB SINAD or better -118 dBm @ 10 dB SINAD or better 13.IF Rejection : 60 dB or better 14.Squelch : Off / Noise / Tone / Digital 15.15. ECCM :The radio shall have ECCM capability using frequency hopping (Quicklook 1A, Quicklook 2) and the ability to program unlimited hopping band frequencies in the specified VHF ( 30 - 88 MHZ ) 16.16. Encryption: capable for Voice / Data in all mode (built -in ) 17.COMSEC : Type1 Encryption 18.18. Data Interface : USB2, SYNC, ASYNC, and Ethernet or equivalent 19.The Radio shall be IP- based and have wireless IP capabilities 20.The Radio shall have an embedded GPS and situational awareness capabilities 21.The Radio shall have Remote control capability 22.22. The Radio shall have ( selective /Directed ) calling ( radio - radio, radio - many ) capabilities 23.23. ( BITE ) Built - In - Test Equipment ( test down to unit level ) 24.24. Software shall be upgradable and available for : Basic setting, Data transfer and Tactical chatting 25.Simultaneous voice and data (SIVD ). 26.Environmental ( As per MIL - STD - 810 F ): a.( operating temperature, shock, vibration, immersion, humidity, sand / dust ) MINIMUM HF (20 W) RADIO SPECIFICATION Vehicular & Man pack (MP) Main Features: The radios shall support transmission of plain and ciphered voice and data over the HF band using Type 1 Encryption The radios shall provide an advanced digital security and encryption for voice and data transmission The radios shall support remote control capability Radio Configuration: Vehicular, man pack Data Interface : USB, SYNC, ASYNC, and Ethernet or equivalent The radios shall provide an embedded GPS and Situational Awareness Capabilities The Radio shall be IP- based and have wireless IP capabilities The radios shall contain a Built-In-Test Equipment capability down to the Module level The radios shall provide ECCM using frequency hopping Software shall be upgradable and available for : Basic setting, Data transfer and Tactical chatting Simultaneous voice and data (SIVD) The radio shall be protected from ( short, open) CCT antenna, reverse polarity, over voltage and over current Specifications: FunctionSpecification Frequency range 1.6 - 30 MHZ Frequency Stability0.5 ppm or better Modes of OperationFIX,HOP,ALE,3G, 3G+ or equivalent Types Of ModulationLSB,USB,AME,CW ( For voice ), the latest technology for Data mode RF Input/Output Impedance50 nominal, unbalance Input Power Suitable power input for Vehicular, and high capacity rechargeable battery with charger for man pack (MP) RF Output Power 20W average power (selectable power setting) Undesired Sideband Rejection 60dB or better Carrier Suppression 60dB or better Receiver Sensitivity -117 dbm for 10dB SINAD or better Audio Output 15 mv or better Image Rejection 80 dB or better Intermediate Frequency (IF)Rejection 80 dB or better Environmental As per MIL-STD-810F : ( operating temperature, shock, vibration, immersion, humidity, sand / dust ). Encryption CapabilityAES 256 as minimum or equivalent MINIMUM HF (100 W) RADIO SPECIFICATION Vehicular & Base station Main Features: The radios shall support transmission of plain and ciphered voice and data over the HF band using Type 1 Encryption The radios shall provide an advanced digital security and encryption for voice and data transmission The radios shall support remote control capability Radio Configuration: Vehicular, Base station Data Interface : USB, SYNC, ASYNC, and Ethernet or equivalent The radios shall provide an embedded GPS and Situational Awareness Capabilities The Radio shall be IP- based and have wireless IP capabilities The radios shall contain a Built-In-Test Equipment capability down to the Module level The radios shall provide ECCM using frequency hopping Software shall be upgradable and available for: Basic setting, Data transfer and Tactical chatting Simultaneous voice and data (SIVD) The radio shall be protected from (short, open) CCT antenna, reverse polarity, over voltage and over current Specifications: FunctionSpecification Frequency range 1.6 - 30 MHZ Frequency Stability0.5 ppm or better Modes of OperationFIX,HOP,ALE,3G, 3G+ or equivalent Types Of ModulationLSB,USB,AME,CW ( For voice ), the latest technology for Data mode RF Input/Output Impedance50 nominal, unbalance Input Power 20 - 32 VDC RF Output Power 100 W average power (selectable power setting ) Undesired Sideband Rejection 60dB or better Carrier Suppression 60dB or better Receiver Sensitivity -117 dbm for 10dB SINAD or better Audio Output 15 mv or better Image Rejection 80 dB or better Intermediate Frequency (IF)Rejection 80 dB or better Environmental As per MIL-STD-810F : ( operating temperature, shock, vibration, immersion, humidity, sand / dust ). Encryption CapabilityType 1 Encryption The Following are the necessary ancillaries required with the radios: Base Station Accessories Antenna Mast Antenna, Antenna base Antenna Cables Cable Assembly, DC Power Tuner unites + cables Remote Control head cable if available Tactical Speaker with cables H250 Handset Shock mount tray AC/DC power supply Ground wire Vehicle Radios Accessories Vehicle antenna base Vehicle antenna Antenna Cable Shock mounting tray AC/DC Power Cables Tuner Unite Tuner Unite Cables Remote Control head cable if available Tactical Speaker with cables H250 Handset Man pack System Accessories Carry bag and holster Man pack radio antennas Rechargeable Battery (2) for each radio Over headset Single Bay charger for each radio Battery Box Any cables needed to operate man pack radio Handheld (HH) Radios Accessories All needed antenna (for both bands in case of multiband radios) Holster Headsets Rechargeable Battery (2) for each Single Bay battery Charger one for each AC/CD (4 Bay) charger Programming and interoperability requirements All Radios should be fully equipped and operational to ensure interoperability requirement especially type1 encryption frequency hopping...etc. Ten sets (S/W, programming kits and Fill Gun) to program the radios to be fully Operational in all modes (Basic setting, Tactical Chatting and Data Transfer) Four Laptops needed Four sets of PC programmer/PC tool kits for Type 1 encryption and any other tools deals with encryption Type 1 Embedded GPS needed Four sets of Cloning Cables IP based radios Warranty Two years warranty for all radios (one standard year & one extended year) Training CONUS and OCONUS operator training for the above radios CONUS and OCONUS Maintenance training to the releasable level Spare parts The recommended Spare parts for each type of the above radio are required Publication Hard and Soft copies of User manuals, Maintenance manuals, and Spare parts Catalogues Encryption devices All encryption devices (fill devices and fill cables) Qty 10 ea of each item are required
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/7e021dd1de4ccce96f2b63909486b6d8)
- Place of Performance
- Address: ACC-APG - Aberdeen Division B HQ CECOM CONTRACTING CENTER, 6001 COMBAT DRIVE ABERDEEN PROVING GROU MD
- Zip Code: 21005-1846
- Zip Code: 21005-1846
- Record
- SN02669100-W 20120209/120207234926-7e021dd1de4ccce96f2b63909486b6d8 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |