SOURCES SOUGHT
99 -- Air Purge Panels for CCTV Cameras
- Notice Date
- 5/17/2012
- Notice Type
- Sources Sought
- NAICS
- 333411
— Air Purification Equipment Manufacturing
- Contracting Office
- Department of Energy, Bechtel National, Inc. (DOE Contractor), Bechtel National Inc., 2435 Stevens Center Place, Richland, Washington, 99352
- ZIP Code
- 99352
- Solicitation Number
- 24590-CM-MRA-JC00-00007
- Point of Contact
- Winifred Renz, Phone: 5093712338
- E-Mail Address
-
werenz@bechtel.com
(werenz@bechtel.com)
- Small Business Set-Aside
- N/A
- Description
- Request for Interest Form CCTV Purge Panels Document Number: 24590-CM-MRA-JC00-00007 Important to Safety? NO Quality Level: CM Quality Surveillance: LEVEL 1 - FINAL INSPECTION PRIOR TO SHIPMENT Commodity Code: 02-4EQ-021719 NAICS Code: 333411 Submit Interest By: June 15, 2012 PROJECT DESCRIPTION AND LOCATION The Hanford Tank Waste Treatment and Immobilization Plant (WTP) is a complex of radioactive waste treatment processing facilities designed and constructed by Bechtel for the Department of Energy (DOE). The facility will process the Hanford Site tank waste and put the waste into a stable glass form. The processed waste will be shipped to other sites for depository. The Project site is located at 200 East Area of the Hanford Site near Richland, Washington, along the Columbia River. The site elevation varies from 662 to 684 feet above mean sea level. Sand and silt exist as surface materials. Ambient temperature is (-) 23 degrees F minimum to 113 degrees F maximum, with relative humidity of 5% minimum to 100% maximum. The project design life is 40 years. SCOPE OF WORK Supplier to manufacture, per the supplied drawing and Technical notes found in the Material Requisition, 40 Air Purge Panels that will supply cooling and lens cleaning air to the CCTV Cameras in the LAW facility. EQUIPMENT AND MATERIALS REQUIRED The panels will consist of a rotameter, pressure reducing valve, two block valves, safety valve, and instrument tubing and fittings mounted on a 22Hx16W inch 316SS ¼" thick plate. All material shall be constructed of 316SS. CODES NA STANDARDS Assembly of the Purge Panels shall be performed in accordance with equipment and materials Manufacture's Standards and recommendations. QA REQUIREMENTS Potential bidders should provide, in electronic format, some documentation that describes their company's Quality Assurance Program. A summary, or table of contents of the program or similar evidence will be satisfactory. The information is to be uploaded directly into Bechtel's Supplier Database: https://supplier.bechtel.com. The successful bidder must be registered in the Bechtel Supplier Database and shall have and maintain a documented quality assurance program. That QAP must meet the applicable WTP requirements on the QA Data Sheet of the Material Requisition. The bidder must have the ability to demonstrate satisfactory implementation of their Quality Assurance Program to be considered for an award. COMMERCIAL\TECHNICAL REQUIREMENTS Bechtel Procurement is responsible for collection, evaluation, and internal publication of Supplier/Subcontractor information through our project's pre-qualification program. In addition to the information requested above, Bechtel requires you to register your company at the Supplier and Contractor Portal at: https://supplier.bechtel.com Prior to being considered on any Bidders List you must go to the Qualification Process on this web site https://supplier.bechtel.com (Supplier Resources) to complete the required forms for this opportunity. All information provided shall be strictly confidential. QUESTIONNAIRE Potential offeror shall submit their interest in this opportunity via e-mail using the "Submit Interest" link provided on the Two Year Forecast Report, which provides an outlined email including, but not limited to the bulleted items below, and is appropriately addressed to our central mailbox and to the buyer. Each interest email should include:  Dun and Bradstreet #:  Company Name:  Company Address:  Contact Phone #:  Contact Fax #:  Contact Person:  E-mail Address: CONTACT Bechtel National, Inc. 2435 Stevens Center Place Richland, WA 99354 Attn: MICHELLE EVANS Mailstop: MS10-C Email: MEVANS@BECHTEL.COM
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOE/BNI/BNI/24590-CM-MRA-JC00-00007/listing.html)
- Place of Performance
- Address: Work to be performed at Suppliers location and shipped as noted on Purchase Order, United States
- Record
- SN02750695-W 20120519/120517235905-c238e0cecf7643482f3b8f6f9ae2f8fa (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |