AWARD
81 -- Tricon Containers and ISO Containers and Toolbox Inserts
- Notice Date
- 5/30/2012
- Notice Type
- Award Notice
- NAICS
- 332439
— Other Metal Container Manufacturing
- Contracting Office
- N00244 NAVSUP Fleet Logistics Center San Diego Seal Beach Office 800 Seal Beach Blvd. Bldg 239 Seal Beach, CA
- ZIP Code
- 00000
- Solicitation Number
- N0024412T0106
- Archive Date
- 6/13/2012
- Point of Contact
- Michael Kutner, 562-626-7074
- E-Mail Address
-
Use this link to contact the Contract Specialist
(michael.kutner@navy.mil)
- Small Business Set-Aside
- N/A
- Award Number
- N00244-12-C-0022
- Award Date
- 5/29/2012
- Awardee
- CAVE Systems, Inc.<br />
- Award Amount
- $405,777.87
- Line Number
- 0001-0003
- Description
- The NAVSUP FLC, San Diego, Detachment Seal Beach requested responses from qualified sources capable of providing specialized tooling storage systems that can be loaded or unloaded to a Tricon container or to an 20 ISO Container with a forklift per the below specifications as follows: CLINDescriptionQty 0001Complete Tricon Container and Toolbox Inserts1 Each (Container supplied by Offeror) Consisting of: TRICON Configuration # 1 SIDE A AND SIDE B (Drawing Attached) 8' tall Tricon Container with Fixed Internal Components (1 each) SIDE A: Full Width Glide-Out shelves 2,250lb capacity standard extension (2 each) SIDE B: Center columns (1 each) Slide-Out Bulk Shelves w/ 500lbs Shelf Support (2 each) 11.2" high 1/2 width Drawer/Shelf Unit w/ 500lb capacity Shelf Support (4 each) 4.7" high 1/2 width Drawer/Shelf Unit w/ 500lb capacity Shelf Support (4 each) 17.5" high 1/2 width Drawer/Shelf Unit w/ 500lb capacity Shelf Support (2 each) 0002Complete Tricon Container and Toolbox Inserts4 Each (Container supplied by Offeror) Consisting of: TRICON Configuration # 2 SIDE A and SIDE B (Drawing Attached) 8' tall Tricon Container with Fixed Internal Components (1 each) SIDES A and B Center columns (2 each) Slide-Out Bulk Shelves w/ 500lbs Shelf Support (4 each) 11.2" high 1/2 width Drawer/Shelf Unit w/ 500lb capacity Shelf Support (8 each) 4.7" high 1/2 width Drawer/Shelf Unit w/ 500lb capacity Shelf Support (8 each) 17.5" high 1/2 width Drawer/Shelf Unit w/ 500lb capacity Shelf Support (4 each) 0003Complete ISO 20 Container and Toolbox Inserts2 Each (Container supplied by Offeror) Consisting of: 20' ISO Container Configuration # 1 (With double doors on one end) (Drawing Attached) Fixed Internals mounted to new commercial ISO 20' Container (1 each) Slide Out Bulk Shelves w/ 500lb Shelf Support (6 each) 11.2" high Drawer/Shelf Unit w/ 500lb capacity Shelf Support (5 each) 4.7" high Drawer/Shelf Unit w/ 500lb capacity Shelf Support (8 each) 17.5" high Drawer/Shelf Unit w/ 500lb capacity Shelf Support (3 each) CONTAINER AND CONTAINER TOOLBOX INSERTS TECHNICAL SPECIFICATIONS 1. CONFIGURATION 1.1 Container 1.1.1 Standard ISO CONEX with doors on both ends NEW AND UNUSED 1.1.2 8' tall TRICON Type 2, with double doors on one end and ISO 20' NEW AND UNUSED 1.2 Volume Utilization 1.2.1 System shall utilize entire height and width of container while maintaining 100% access to contents. 1.2.2 Minimum quantity of 8 up to 36 adjustable and removable compartments in partitioned Drawer/Shelf Unit Standard 1.2.3 Fixed Rack Unit shall be welded to container to increase structural integrity 1.2.4 Removable Drawer/Shelf Unit shall be completely removable from Rack Unit manually, without use of a forklift or other mechanical assistance. 1.3 Customization 1.3.1 Drawer/Shelf Unit and glide-out shelves shall be capable of being reconfigured, added to, or removed totally from container. 1.4 Tricon Features: - Corrugated steel sides, roof, and swing doors on both sides - Heavy duty steel floor - Four way fork lift pockets - Wall tie down steel lashing rings, 4,000 Ibs capacity each (20) total - Door corner post tie downs, (20) total = restraint system, shoring slot will support 2" x 6" lumber - Vents, (2) each - Adjustable shelving brackets, (5) sets: (10) vertical E-Track section total - Military STANDARD NON-CARC GREEN 595B #34094 or STANDARD NON-CARC TAN 595B #33446 exterior paint Tricon Length Height Width Door Opening Ext./Int. Ext. /Int. Ext./ Int. Height /Width Ft./ln. 6' 5 1/2" / 75.31" 8'0" / 89.02" 8'0" / 89.53" 85.04" / 73.70" Metric 1.969 / 1.912 2.438 / 2.261 2.438 / 2.274 2.160 / 1.872 Tricon Tare Weight Payload Gross Weight Cubic Capacity Lbs. 2,800 12,100 14,900 347 Cu. Ft. Kg. 1,270 5,489 6,759 9.83 Cu. M. 1.5 ISO Cargo Container (20 X 8 X 8 , Dry Freight, Type 2, with Double Doors on One End) Features: - Corrugated steel sides, roof, and swing doors on one end - (2) sets of forklift pockets, laden and unladen - 1 1/8 thick marine plywood floors, forklift tested to 16,000 lbs per 44 square inches - Top and bottom wall tie down steel lashing rings, 4,000 Ibs capacity each (24) total tested at 6,000 lbs. - Each door corner post has (4) shoring slots to accommodate a 2" x 6" lumber restraint system - Vents, (2) each - Military STANDARD NON- CARC GREEN 595B #34094 or STANDARD NON-CARC TAN 595B #33446 exterior paint ISO CT Length Height Width Door Opening Ext./Int. Ext. /Int. Ext./ Int. Height /Width Ft./ln. 19 10 / 19 2 1/16 8'0" / 7 4 3/16 8'0" / 7 8 6 11 5/8 /7 8 1/8 Metric 6,058 / 5,084 2,438 / 2,240 2,438 / 2,350 2,125 / 2,340 ISO CT Tare Weight Payload Gross Weight Cubic Capacity Lbs. 5,35047,560 52,910 1,086 Cu. Ft. Kg. 2,42721,573 24,000 30.8 Cu. M. 2. SECURITY 2.1 Three (3) Level security locking system 2.1.1 Ability to lock container doors 2.1.2 Ability to lock all Drawer/Shelf Units within the Removable Pallet with closure "gates" 2.1.3 Ability to lock contents within Drawer/Shelf Unit 2.2 All Boxes shall be environmentally sealed (weatherproof) to protect contents, allowing for storage of moisture sensitive items 2.3 Minimum three (3) level Drawer/Shelf Unit retention system 2.3.1 Four (4) point Drawer/Shelf Unit pin retention system --holds box within Shelf Support 2.3.2 Six (6) point Shelf Support retention system-- holds Shelf Support within Rack Unitallowing for 100% extension and complete retention when stowed. 2.3.3 Four (4) point M12 8.8 grade hex bolt attachment design to secure Shelf Support to Rack Unit. 3. SAFETY 3.1 Minimum 4X safety factor for Drawer/Shelf Unit Slide Support 3.2 Minimum 3X safety factor for Glide-Out shelves 3.3 Gas strut supported lid 3.4 Thumb latch Drawer/Shelf Unit release system 4. MAINTENANCE & WARRANTY 4.1 No maintenance required 4.1.1 System shall be equipped with self-lubricating slides 4.1.2 System components shall be double powder coated for corrosion resistance 4.2 Warranty Minimum One (1) year from time of delivery
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DON/NAVSUP/280/Awards/N00244-12-C-0022.html)
- Record
- SN02761536-W 20120601/120531000036-ca45d8275c5c27a2ee1acfaaa1f90de2 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |