PRESOL | 77 | Fort Carson- Rhythm Instruments

FBO DAILY ISSUE OF JULY 12, 2012 FBO #3883
SOLICITATION NOTICE

77 -- Fort Carson- Rhythm Instruments

Notice Date: 7/10/2012
Notice Type: Combined Synopsis/Solicitation
Contracting Office: 1676 Evans st, Fort Carson, CO 80913
ZIP Code: 80913
Solicitation Number: W911RZ-12-T-0110
Response Due: 7/18/2012
Archive Date: 1/14/2013
Point of Contact: Name: Client Services, Title: Sourcing Agent, Phone: 1.877.9FEDBID, Fax: 703.442.7822
E-Mail Address: clientservices@fedbid.com;
Small Business Set-Aside: N/A
Description: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is W911RZ-12-T-0110 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-58. The associated North American Industrial Classification System (NAICS) code for this procurement is 339992 with a small business size standard of 500.00 employees.This requirement is unrestricted and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2012-07-18 15:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Fort Carson, CO 80913 The MCC Joint Base Lewis McChord - ICO Carson requires the following items, Brand Name or Equal, to the following: LI 001, Brand name or equal to Fender Super-Sonic 22 22W 1x12 Tube Guitar Combo Amp Black Minimum Specifications: ?22 watt amplifier ?Installed Tubes: 2 - 6V6, 3 - 12AX7, 2 - 12AT7 ?Amplifier Cover Included ?Weight: less than 50lb. ?Dimensions: Within 17-1/3"H x 24"W x 8-1/2"D ?Deluxe Reverb power platform ?Vintage channel contains pre-gain tone controls and two switchable voices ?Burn channel contains dual gain controls and post-gain EQ ?Fender long-spring Reverb by Accutronics ?4-button footswitch for Channel, Fat, Reverb, Effects Loop. ?Amp Type: Tube ?Output: 22 Watts, 8 ohms ?Speaker: 12", 50 Watt Fender "Lightning Bolt" Speaker ?Channels: 2 (Vintage and Burn) ?Controls: Vintage Channel: Volume, Treble, Bass, Voicing Switch (Normal/Fat). Burn Channel: Gain 1, Gain 2, Treble, Bass, Middle, Volume, Master Reverb ?Effects Spring Reverb ?Covering: Black Textured Vinyl preferred, but not necessary, 1, EA; LI 002, Brand name or equal to Markbass New York 151 Bass Speaker Cabinet Black 8 Ohms Minimum Specifications: ?Impedance: 8 Ohms ?Speaker size: 1x15" ?Bass port: rear ?Tweeter: piezo ?Power handling: 400W RMS (AES Standard) ?Crossover frequency: 3.5 kHz ?Frequency response: 40 Hz to 18 kHz ?Sensitivity: 100 dB SPL ?Weight: under 40 lb. ?Dimensions: within 18.3"W x 18.3"H x 18.9"D ?Other: Stackable and compatible ?MARK BASS? systems, 1, EA; LI 003, Brand name or equal to Markbass CMD 102P 300/500W 2x10 Tilt-Back Bass Combo Amp Minimum Specifications: ?Speaker: 2 x 10" ?Tweeter: piezo ?Bass port: front ?Impedance: 8 ohms ?Sensitivity: 101 dB SPL ?Speaker power handling: 400W RMS (AES Standard) ?Frequency response: 40Hz to 18kHz ?Crossover frequency: 3kHz ?Dimensions: within 18.9"W x 23.4"H x 18.7"D ?Weight: under 45 lb. The specs on the head must be: Power oInput impedance: 500Kohm, max. voltage: 15Vpp oBalanced Output (XLR): 22Kohm, max. voltage 25Vpp oEffect Return impedance: 22Kohm, max. voltage: 25Vpp oOutput Power: 300W RMS at 8 ohm, 500W RMS at 4 ohm Controls oGAIN ?80dB to +23dB range oMASTER VOLUME oGROUND LIFT: switch on rear panel Equalization LOW oCenter frequency: 40Hz; level ?16dB LOW MID oCenter frequency 360Hz, level ?16dB HIGH MID oCenter frequency 800Hz, level ?16dB HIGH o10kHz shelf; level ?16dB VPF (Variable Pre-shape Filter) ocenter frequency 380Hz (cut) VLE (Vintage Loudspeaker Emulator) ofrequency range 250Hz?20kHz (cut) Outputs EFFECT SEND oUnbalanced, max. voltage 20Vpp (pre-EQ) TUNER OUT oUnbalanced, max. voltage 25Vpp LINE OUT oBalanced XLR, max. voltage 10 Vpp SPEAKER OUT oSpeakon, 1/4", 1, EA; LI 004, Brand name or equal to Modulus Guitars Funk Unlimited FBJ4 Bass Guitar Black Minimum Specifications: ?Dimensions: within 17"W x 6"H x 52"D ?Weight: under 25 lbs. ?1.56"Width at the nut ?2.45"Width at the 22nd fret ?Alder wood body ?Double cutaway ?Quantum "D" shaped shell bolt-on neck made from layers of hand-formed, aerospace-grade, epoxy-impregnated carbon fibers ?22 frets ?34" scale ?Composite fingerboard ?Bridge: Badass (company not specific to any bass brand) ?Pickups: Bartolini Jazz ?Tone Control system: Bartolini NTBT tone system; active bass and treble ?Pickguard included ?Chrome hardware, 1, EA; LI 005, Brand name or equal to Modulus Guitars Quantum 5-String Bass Lacewood Minimum Specifications: ?Required specs: ?Lacewood top ?Alder body ?Pickup: Dual EMG-DC with 3 band EQ ?Tone Control: Active Bass and Treble ?Balance and Volume controls ?Neck material: Carbon fiber ?Fingerboard: Phenolic ?Width at nut: 1.85? ?Width at 24th fret: 2.75? ?String spacing: 17 mm ?Hardware: Black preferred, 1, EA; LI 006, Brand name or equal to Aguilar Tone Hammer Bass Preamp/Direct Box Minimum Specifications: ?Inputs: One 1/4" jack ?Outputs: One 1/4" jack, One XLR (nominal output - 14 dBu balanced) EQ: ?Bass +/- 18 dB @ 40 Hz ?Mid +/- 17 dB @ 180 Hz to 1 kHz ?Treble +/- 18 dB @ 4 kHz ?Controls: ?Ground lift switch ?Pre/Post DI switch ?Engage switch ?AGS switch Pre/Post DI ?Unbalanced output can drive a power amp ?AGS circuitry ?Cut and boost of treble, mid and bass frequencies ?Fully sweepable midrange frequencies ?Preamp powered by two nine volt batteries, phantom power or optional universal power supply ?Ground lift switch ?Heavy Duty steel construction preferred for deployment rigors and stress, 1, EA; LI 007, Brand name or equal to Yamaha MOTIF XF6 61-Key Music Production Synthesizer **See attachment 002 below ?combined synopsis/solicitation: W911RZ-12-T-0110? for the minimum specification for line item 07., 1, EA; LI 008, Brand name or equal to Yamaha MOTIF XF8 88-Key Music Production Synthesizer **See attachment 002 below ?combined synopsis/solicitation: W911RZ-12-T-0110? for the minimum specification for line item 08., 1, EA; LI 009, Brand name or equal to Fender Select Stratocaster Electric Guitar with Maple Fingerboard Dark Cherry Burst Maple Fingerboard Minimum Specifications: ?Body: Alder with Flame Maple Top, Gloss Lacquer Finish ?Neck: Must be Maple wood, Birdseye Maple preferred ?Neck Finish: Light or Satin Lacquer on Back ?Headstock front finish: Gloss Lacquer preferred ?Buffed Fingerboard ?Neck Shape: Modern "C" Shape ?Fretboard: Maple wood required ?Fretboard Radius: 9.5"-14" Compound Radius (24.1 cm-35.56 cm) ?Frets: 22, Medium Jumbo ?Position Inlays: Black Pearloid Dot Position Inlays ?Scale Length: 25.5" (64.8 cm) ?String Nut: Synthetic Bone, 1.685" (42.8 mm) ?Truss Rod: Bi-Flex? Truss Rod System ?Truss Rod Nut: 1/8" American Series Nut ?Pickups: Fender? or equal quality Select Single Coil Pickup (Bridge) oFender? or equal quality Select Single Coil Pickup (Middle) oFender? or equal quality Select Single Coil Pickup (Neck) ?Pickup Switching: 5-Position Blade: Position 1. Bridge Pickup, Position 2. Bridge and Middle Pickup, Position 3. Middle Pickup, Position 4. Middle and Neck Pickup, Position 5. Neck Pickup ?Controls: Master Volume, Tone 1. (Neck Pickup), Tone 2. No-Load Tone Control (Middle and Bridge Pickups) ?Special Electronics: No-Load Tone Control ?Hardware: Nickel/Chrome preferred ?Tuning Keys: Deluxe Staggered Cast/Sealed Locking Tuning Machines ?Bridge: 2-Point Synchronized Tremolo with Vintage Style Bent Steel ?Saddles ?Pickguard: 3-Ply Parchment/Black/Parchment, 1, EA; LI 010, Brand name or equal to Martin Performing Artist Series OMCPA1 Acoustic-Electric Guitar Minimum Specifications: ?Body size: 000-14 Fret Cutaway ?Top: Solid Sitka Spruce wood required ?Rosette: Two Ring ?Back material: Solid East Indian rosewood required ?Side material: Solid East Indian rosewood required ?Binding: Solid Ovangkol ?Neck shape: Performing Artist profile ?Headstock: Solid/Square Taper ?Scale length: 25.4'' ?Fingerboard width at nut: 1-3/4'' ?Fingerboard at 12th fret: 2-1/8" ?Fingerboard position inlays: Arrows and squares ?Bridge material: Solid Black Ebony wood required ?Bridge style: Performing artist Belly ?Tuning machines: Gold enclosed with large buttons ?Pickguard: Delmar tortoise color preferred ?Case: Hardshell body fitting ?Electronics: Fishman F1 Aura, 1, EA; LI 011, Brand name or equal to Marshall 1936 2x12 Cabinet Minimum Specifications: ?Two 12" Celestion G12T75 speakers ?150W handling ?Mono or stereo option ?eight ohms mono; sixteen ohms stereo ?Size matches full-size Marshall amplifier heads (already owned by the unit, must be compatible) ?Locking joints ?Smooth ABS plastic corners ?Heavy-duty, ergonomically recessed grab handles, 1, EA; LI 012, Brand name or equal to Blackstar Series One 45 45W 2x12 Tube Guitar Combo Amp Black Minimum Specifications: ?45W combo with power reduction capability (equaling a 10% down grade of total power output) ?Three ECC83, one ECC82, two EL34 tubes ?Two channels and four modes (footswitchable) ?Clean channel with Warm (Plexi) and Bright (Class A) modes ?Overdrive channel with Crunch and Super Crunch modes ?Tone Controls: oInfinite Shape Feature (ISF) equipped tone controls oPresence and Resonance controls oMaster Volume ?Inputs and Outputs: o1/4? send and return effects loop w/level adjusterof +4dBV/-10dBV oXLR speaker emulated output o5 pin MIDI switching ?Speakers: Two(2) Celestion Neo 12, 1, EA; LI 013, Brand name or equal to Fender American Standard Stratocaster Electric Guitar 3-Tone Sunburst Rosewood Fretboard Minimum Specifications: ?Solid alder body (urethane finish) ?Neck shape: Modern ?C? shape with rich, deep neck tint, glossed neck front with light or satin finished back; 4-bolt neck plate with Micro-Tilt ?Truss rod nut: 1/8? ?22 medium jumbo frets ?Fretboard radius: 9.5? ?Nut Width: 1.685? ?Scale Length: 25.5? ?3 hot American Strat single-coil pickups ?Delta-tone? no-load circuit (includes high output bridge pickup and special no-load tone control for middle and bridge pickups) ?Bent steel Fender saddles ?Copper Infused Cast Strat? Bridge Block (steel with copper- 100% metal) ?Thinner undercoat ?Tremolo: American 2-point synchronized with bent steel saddles ?Rosewood or maple fretboard ?Staggered machine heads ?Hardshell case: SKB molded rectangular or equal required, 1, EA; LI 014, Brand name or equal to PRS 2011 Hollowbody II Electric Guitar McCarty Tobacco Sunburst Minimum Specifications: ?Carved figured maple wood top with mahogany sides and carved figured maple wood back required ?V12 finish ?Mahogany neck required ?Pattern neck carve ?Bound East Indian rosewood fretboard required ?Scale Length 25? ?22 frets ?PRS (Paul Reed Smith) Piezo stoptail bridge ?Hardware type: Nickel required ?57/08 neck pickup ?57/08 bridge pickup ?Volume and Tone Control with 3-Way Toggle Pickup Selector and LR Baggs/PRS Piezo Pickup System ?PRS low-mass locking tuners, 1, EA; LI 015, Brand name or equal to Martin Performing Artist Series DCPA3 Acoustic-Electric Guitar Natural Minimum Specifications: ?Top: Solid Sitka Spruce wood required ?Back/Sides: Solid East Indian Rosewood required ?Neck: Select Hardwood Finish required ?Body: Satin or light Finish ?Top: Polished Gloss (protective finish) required ?Scale Length: 25.4" ?Digital chromatic tuner ?Volume and blend controls ?Independent 3-band EQ for both Gold Plus pickup and Aura Image signals ?Compressor ?Phase control ?Automatic anti-feedback filter with up to 3 notches, 1, EA; LI 016, Brand name or equal to Taylor 210CE-G Acoustic-Electric Guitar with Gloss Finish Minimum Specifications: ?6-string ?Dreadnought cutaway design ?Indian rosewood back and sides required ?Solid Sitka spruce top required ?25-1/2" scale ?NT neck joint ?Mahogany neck wood required ?Ebony fretboard required ?Standard Taylor neck shape ?20 frets ?1-11/16" nut width ?15" radius ?Ebony bridge required ?Taylor tuners ?Chrome hardware preferred or standard ?Integrated electronics with 2-band EQ and volume control ?Gloss top, satin back and sides, 1, EA; LI 017, Brand name or equal to Blackstar Venue Series HT Studio 20 20W Tube Guitar Combo Amp Black Minimum Specifications: ?20 Watt tube combo ?Tubes: 2xECC83, 2xEL34 ?Two footswitchable channels w/ FS-4 footswitch ?12" Celestion speaker ?Controls: oInfinite Shape Feature equipped tone contour control oMaster volume oEnhanced tone controls oDigital reverb with Dark/Light tone choice ?Speaker emulated ?? output compatible for direct to tape send or headphones ?Effects loop ?? send and return with +4dVB/-10dVB level control ?Power (RMS): 20 Watts ?Weight: 45 lb. ?Dimensions: 22-3/5" x 20-4/5 x 11-1/2", 1, EA; LI 018, Brand name or equal to Marshall JVM Series JVM205C 50W 2x12 Tube Combo Amp Black Minimum Specifications: ?50W power ?All-valve, with 5 x ECC83s, and 2 x EL34s ?1x Vintage 12" + 1x Heritage 12" Speaker ?2 totally independent, footswitchable channels ?Each channel has 3 footswitchable modes ?Footswitchable, studio-quality digital reverb ?Independent reverb controls for each channel ?2 footswitchable master volumes ?2 FX loops, one series, and one parallel ?Parallel FX loop is footswitchable on/off ?Speaker emulated XLR output ?4-way footswitch (with memory) supplied ?All switching can be done via MIDI ?27" x 20" x 10.5" (690x510x265mm) ?65 lbs. (29.5kg), 1, EA; LI 019, Brand name or equal to Fender Super-Sonic Twin 100W 2x12 Tube Guitar Combo Amp Black Minimum Specifications: ?100W ?2 - 12" Celestion Vintage 30 speakers ?7 - 12AX7 and 2 - 12AT7 preamp tubes ?4 - 6L6 power tubes ?Vintage and Burn channels ?Switchable voices on Vintage channel ?Burn channel post-gain EQ and two-stage cascading preamp controls ?Tube-driven long-spring reverb by Accutronics ?Professional FX loop with level control (+4vDB/-10vDB); may also be used as a footswitchable boost ?Automatic Bias sets output tubes to factory settings without a meter or tools ?Damping control for Normal, Loose, or Tight speaker response ?Custom transformers by Schumacher ?Cover and 4-button footswitch included, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MCC Joint Base Lewis McChord - ICO Carson intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MCC Joint Base Lewis McChord - ICO Carson is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. CCR Requirement - Company must be registered on Central Contractor Registration (CCR) before an award could be made to them. If company is not registered in CCR, they may do so by going to CCR web site at http://www.ccr.gov. The following factors shall be used to evaluate offers: Award will be made on the basis of lowest price technically acceptable. The Government intends to evaluate offers and make award without discussions; however, this does not preclude the Government from having discussions if it is in the best interest of the Government to do so. The following DFARS clauses shall apply: 252.204-7004 Alternate A Central Contractor Registration, 252.211-7003 ALT I (Item Identification and Valuation) (Aug 2008), 252.212-7001 (Contract Terms and Conditions required to implement statues or executive orders) (Sep 2008), 252.225-7001 (Buy American Act and Balance of Payments) (Jun 2005), 252.225-7002 Qualifying Country Sources as Subcontractors, 252.232-7003 (Electronic Submission of Payment Requests) (Mar 2008) 252.204-7003 (Control of Govt Personnel Work Product)252.232-7010 (Levies on Contract Payments) 252.243-7001(Pricing of Contract Modifications) The Contractor shall provide a signed copy of the Buy American Act certificate with their quotes. A copy of the clause 252.225-7001 can be viewed at http://farsite.hill.af.mil/VFDFARA.HTM. All invoices shall be submitted and uploaded via Wide Area Workflow in accordance with DFARS 252.232-7003. Information is available at https://wawf.eb.mil/. FOB Destination terms apply to this acquisition. The quotation price shall include all shipping and handling charges. Shipping and/or handling charges shall not be listed in the quotation as a separate line item entry. Applicable shipping or handling charges shall be included into the unit/extended price. The Government will not accept re-manufactured or repaired equipment. The following clauses will be in the contract and may be viewed at http://farsite.hill.af.mil/: 52.204-7 (Central Contractor Registration),52.204-10 (Reporting executive compensation and first-tier subcontract awards) 52.209-6 (Protecting the Govt?s Interest when sub contracting) 52.212-4 (Contract Terms and Conditions ? Commercial Items), 52.212-5 (Contract Terms and Conditions Required to Implement Statues or Executive Orders ? Commercial Items), 52.219-6 (Notice of Total Small Business Set Aside), 52.219-28 (Small Business Representation), 52.222-3 (Convict Labor), 52.222-21 (Prohibition of segregated facilities), 52.222-26 (Equal Opportunity), 52.222-36 (Affirmative Action for Workers with Disabilities), 52.222-50 (Combat Trafficking in Persons), 52.232-33 (Payment by Electronic Funds Transfer ? Central Contractor Registration),52.225-13 (Restrictions on Certain Foreign Purchases), 52.247-34 (FOB Destination), 52.252-2 (Clauses Incorporated by Reference). The full text of the referenced FAR clauses may be accessed electronically at http://farsite.hill.af.mil/. The following provisions will be in the contract and may be viewed at http://farsite.hill.af.mil/ : 52.211-6 (Brand Name or Equal), 52.212-1 (Instructions to Offerors- Commercial Items), 52.212-2 (Evaluation- Commercial Items), 52.212-3 (Offeror Representations and Certifications- Commercial Items) (Jun 2008).252.225-7031 (Secondary Arab Boycott of Israel)
Web Link: FBO.gov Permalink
(https://www.fbo.gov/notices/b20c8559058458ff5152f673eae64b42)
Place of Performance: Address: Fort Carson, CO 80913; Zip Code: 80913
Record: SN02798398-W 20120712/120710235544-b20c8559058458ff5152f673eae64b42 (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

77 -- Fort Carson- Rhythm Instruments