Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY ISSUE OF JULY 12, 2012 FBO #3883
MODIFICATION

41 -- Air Conditioning, DX Split System

Notice Date
7/10/2012
 
Notice Type
Modification/Amendment
 
NAICS
333415 — Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing
 
Contracting Office
Department of Energy, Bechtel National, Inc. (DOE Contractor), Bechtel National Inc., 2435 Stevens Center Place, Richland, Washington, 99352
 
ZIP Code
99352
 
Solicitation Number
24590-QL-MRA-MEHX-00008
 
Point of Contact
Winifred Renz, Phone: 5093712338
 
E-Mail Address
werenz@bechtel.com
(werenz@bechtel.com)
 
Small Business Set-Aside
N/A
 
Description
Request for Interest Form Air-Conditioning, UPS Battery & Secondary Offgas Exhauster Rooms DX Split System Document Number: 24590-QL-MRA-MEHX-00008 Important to Safety? YES Quality Level: NQA-1 Quality Surveillance: LEVEL 2 - LIMITED SCOPE INSPECTION Commodity Code: MEHX NAICS Code: 333415 Submit Interest By : Due by COB August 6, 2012 PROJECT DESCRIPTION AND LOCATION The Hanford Tank Waste Treatment and Immobilization Plant (WTP) is a complex of radioactive waste treatment processing facilities designed and constructed by Bechtel for the Department of Energy (DOE). The facility will process the Hanford Site tank waste and put the waste into a stable glass form. The processed waste will be shipped to other sites for depository. The Project site is located at 200 East Area of the Hanford Site near Richland, Washington, along the Columbia River. The site elevation varies from 662 to 684 feet above mean sea level. Sand and silt exist as surface materials. Ambient temperature is (-) 23 degrees F minimum to 113 degrees F maximum, with relative humidity of 5% minimum to 100% maximum. The project design life is 40 years. SCOPE OF WORK Design, environmentally qualify, furnish materials, fabricate, test and prepare for shipment; a packaged direct expansion(DX) split system air conditioning systems complete with all necessary accessories for system operations except the external refrigerant piping. Submittal of engineering design documentation to verify design is required. The systems can be custom designed or an approved engineering equal using commercially available systems. EQUIPMENT AND MATERIALS REQUIRED Provide three(3) 12.5 Ton systems and three(3) 5 ton systems and all accessories necessary for operations except external refrigerant piping between units. Each system will contain an air handling unit and condensing unit. CODES ASME NQA-1-2000, ASME B&PV-95 AND SECTION IX, NFPA 90A-99, NFPA-70-99, AWS D1.6, AWS-D1.1, AWS D1.3, ASME D1.6 STANDARDS ASHRAE 15 & 52,2 & 62.1, AHRI 350& 370,& 340& 365, & 410, UL 508A, UL 900, ISA S84.01 QA REQUIREMENTS Potential bidders should provide, in electronic format, some documentation that describes their company's Quality Assurance program. A summary, or table of contents of the program, similar evidence will be satisfactory. The information is to be uploaded directly into Bechtel's Supplier Database: https://supplier.bechtel.com. The successful bidder must be registered with Bechtel and shall have and maintain a documented quality assurance program that complies with the applicable WTP requirements including, but not limited to, 10 CFR 830, DOE Order 414.1, ASME NQA-1. The bidder's Quality Assurance Program must meet the specific requirements of the Material Requisition. The bidder must have the ability to demonstrate satisfactory implementation of their Quality Assurance Program to be considered for an award. In order to expedite the qualification process, potential bidders are encouraged to provide a controlled copy of their Quality Assurance Program (include the "Package Ref." - Document Number) to the Buyer noted below, if controlled copy was not previously submitted and evaluated by BNI Supplier Qualification. The preferred method is to submit in electronic format via e-mail to: bjkalous@bechtel.com -or- Hard copies (include the "Package Ref." - Document Number) may be submitted to: Bechtel National, Incorporated Attn: Bethany Kalous MS 10-E 2435 Stevens Center Place Richland, WA 99354 COMMERCIAL\TECHNICAL REQUIREMENTS Bechtel Procurement is responsible for collection, evaluation, and internal publication of Supplier/Subcontractor information through our project's pre-qualification program. In addition to the information requested above, Bechtel requires, that if the company has not already done so, you to register your company at the Supplier and Contractor Portal at: https://supplier.bechtel.com Prior to being considered on any Bidders List you must go to the Qualification Process on web site www.hanfordvitplant.com (Supplier Resources, Qualification Process) to complete the required forms for this opportunity. These complete documents should than be uploaded directly into your company's registration information at https://supplier.bechtel.com. All information provided shall be strictly confidential. QUESTIONNAIRE Potential offeror shall submit their interest in this opportunity via e-mail using the "Submit Interest" link provided on the Business Opportunities (www.hanfordvitplant.com), which provides an outlined email including, but not limited to the bulleted items below, and is appropriately addressed to our central mailbox and to the buyer. Each interest email should include:  Dun and Bradstreet #:  Company Name:  Company Address:  Contact Phone #:  Contact Fax #:  Contact Person:  E-mail Address: Note: The wtpacqui@bechtel.com e-mail address is a document file address and is not an actual person. Bechtel personnel will access this address to see who has registered, but since it is not owned by any single person, do not send request for information to this address. If you require additional information, please contact the person listed in this posting. CONTACT Bechtel National, Inc. 2435 Stevens Center Place Richland, WA 99354 Attn: Bethany Kalous Mailstop: MS10-E Email: bjkalous@bechtel.com
 
Web Link
FBO.gov Permalink
(https://www.fbo.gov/spg/DOE/BNI/BNI/24590-QL-MRA-MEHX-00008/listing.html)
 
Place of Performance
Address: Supplier's place of business, United States
 
Record
SN02798736-W 20120712/120711000003-66f3da082843eaaaa9e1152ab8f85b6f (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.