Loren Data's SAM Daily™

FBO DAILY ISSUE OF AUGUST 01, 2012 FBO #3903
MODIFICATION

51 -- RFQ 5180-00-313-3045 - NEW RFQ

Notice Date

7/30/2012
 

Notice Type

Modification/Amendment
 

NAICS

332212 — Hand and Edge Tool Manufacturing
 

Contracting Office

General Services Administration, Federal Acquisition Service (FAS), FMHAC & HSOC, 1500 East Bannister Road, Kansas City, Missouri, 64131, United States
 

ZIP Code

64131
 

Solicitation Number

RFQ_5180-00-313-3045
 

Archive Date

8/16/2012
 

Point of Contact

Katie Norton, Phone: 8169263582
 

E-Mail Address

katie.norton@gsa.gov
(katie.norton@gsa.gov)
 

Small Business Set-Aside

N/A
 

Description

Please use this file REQUEST FOR QUOTATION RFQ-5180-00-313-3045 July 30, 2012 United States of America GSA Global Supply 1500 E. Bannister Road Kansas City, Missouri 64131 Phone: (816) 926-3582 Email: katie.norton@gsa.gov FOR INFORMATION, PLEASE CONTACT: Katie Norton Please submit your response by close of business Wednesday August 1, 2012 via the above email. Important: This is a request for quotations, and quotations furnished are not offers. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation, or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. If you are unable to quote, please so indicate on this form and return. Please review the attached item purchase description(s). Delivery shall be FOB Destination. Shipment time ____________________ARO (After receipt of order) Price is valid through ____________________________ Vendor's Minimum Order Amount, if any:___________________ Business size: Large _______ or Small ________ Vendor's DUNS Number: ____________________________________ Name & address of vendor and signature of quoter: Name:_____________________________________________________ Address:___________________________________________________ City:_________________________________ State:________________ Telephone: _____________________________FAX: _________________ Print name:___________________________________________________ Signature:____________________________________ Date:_________ PLEASE NOTE: Effective October 1, 2003 all vendors seeking to do business with the Federal Government are required to register with the Central Contract Registration at www.ccr.gov. If you are not registered and are not willing to register we will not be able make an award to your firm. Failure to return all pages will result in your quote being removed from consideration. Please provide pricing for the following NSN(s). See description(s) below. NSN QTY Unit price 5180-00-313-3045 7 5180-00-313-3045 Ver.: 16 UI: KT TOOL KIT, ELECTRICIAN'S: DESCRIPTION Kit shall be in accordance with the Army Sets, Kits, and Outfits Component List Number 5180-95-N35, LIN W36977. Last Review Date: 24 January 2003; Publication Date: 01 September 2008. End Item Description: Sets, Kits, and Outfits for Tool Kit, Electrician's. Exception to NSN 5110-00-242-5385 File, Hand (American Pattern), Mill. The unit of issue shall be Each instead of Dozen. Additional Components Bender, Electrical Conduit, Hand Shall be one piece design consisting essentially of a curved fulcrum, an extended jaw to grip the conduit, and a suitable stud or socket for attachment of an ordinary pipe handle. Material: standard wall (heavy) rigid steel conduit Size: 3/4 inch; for 1/2 and 3/4 inch conduit Ridge Tool Co. part number 35235 or equal. Offering on: Manufacturer's Name: ______________________________ Brand __________________________________________ Model or Part No. __________________________________ Table of product attributes included? ( Y / N ) ___________ Drill, Masonry, Hand Star design, with four cutting edges and equal number of flutes. The drill body shall be hexagonal with the striking end slightly chamfered. The cutting edge shall be slightly pointed, and the cutting edges shall be sharp. The hardness of the cutting edge shall be 40 minimum and 53 maximum on the Rockwell "C" scale. Diameter cutting end: 3/4 inch Stock size: 0.50 inch Length fluted section: 2-1/4 inch minimum Overall length: 12 inch Drill, Masonry, Hand Star design with four cutting edges and an equal number of flutes. The drill body shall be hexagonal or octagonal with the striking end slightly chamfered. The cutting edge shall be slightly pointed, and the cutting edges shall be sharp. The hardness of the cutting edge shall be 52 minimum and 60 maximum on the Rockwell "C" scale. Diameter cutting end: 3/8 inch Stock size: 5/16 inch Length fluted section: 1-3/8 inch minimum Overall length: 12 inch Stripper, Cable, Hand Designed to remove insulation from coaxial cable sizes 1/4 inch through 9/16 inch diameter. Consists of a spring loaded, pliers style handle with two (2) parallel, individually adjustable cutting blades. When positioned, the handle should hold the cable firmly and place the blades on, and perpendicular to the cable, 0.620 inch apart so when it is rotated around the cable, the blades shall cut through cable insulation to desired depth and allow for removal. Overall length: 7 inch. See Technical Specifications paragraph(s): T3.1, T4.1 and T6.1 List of Components of 5180-00-313-3045: 1. 5120-00-221-1542 Qty: 2 UI: EA AWL, SCRATCH: DESCRIPTION Scratch type awl with an overall length of 6-1/2" +/-1/2". Blade length 3-3/4 inches +/-1/4 inch. Shall have a wooden handle with a ferrule having a minimum length of 7/8 inches or shall have a plastic handle. Handle length 2-1/2 inches +/-1/4 inch. Diameter of handle at end shall be 1-1/2" +/-1/8" and be a non rolling handle. ECHO Industries Inc Part Number 300FIN or equal Offering on: Manufacturer's Name: ______________________________ Brand __________________________________________ Model or Part No. __________________________________ Table of product attributes included? ( Y / N ) ___________ See Technical Specifications paragraph(s): TE.6 2. 5140-00-529-2694 Qty: 2 UI: EA BELT, TOOL REPAIRMAN'S DESCRIPTION In accordance with GSA Drawing Number 00-529-2694 Revision A, dated April 19, 1995. Special Features: Leather; with loop -1; with hardware, hammer loop -1, snap hook -1, tape sling -1, data: 1-3/4 in. width belt; 38 in. waist size. See Technical Specifications paragraph(s): T1.19 and T2.4 3. 5120-00-618-6898 Qty: 1 UI: EA BENDER, ELECTRICAL CONDUIT, HAND DESCRIPTION Type: Bender, Electrical Conduit, Hand Shank Thread Diameter: 3/4 in. Conduit Trade Size Accomodated: 1/2 in. Conduit Type Accommodated: Electrical Metallic Tubing (EMT) Handle: Not furnished. Unit Type: Fixed Radius Shank Thread Location: Internal Ridge Tool Company part number 35215 or equal. Offering on: Manufacturer's Name: ______________________________ Brand __________________________________________ Model or Part No. __________________________________ Table of product attributes included? ( Y / N ) ___________ 4. 5120-00-618-6899 Qty: 1 UI: EA BENDER, ELECTRICAL CONDUIT, HAND DESCRIPTION Type: Bender, Electrical Conduit, Hand Shank Thread Diameter: 1 in. Conduit Trade Size Accommodated: 3/4 in. Conduit Type Accommodated: Electrical Metallic Tubing (EMT) Handle: Not furnished. Unit Type: Fixed Radius Shank Thread Location: Internal Special Features: Also for 1/2 in. rigid conduit. Ridge Tool Company part number 35220 or equal. Offering on: Manufacturer's Name: ______________________________ Brand __________________________________________ Model or Part No. __________________________________ Table of product attributes included? ( Y / N ) ___________ 5. 5133-00-293-2907 Qty: 1 UI: EA BIT, AUGER DESCRIPTION Bit Auger Shank Style: Taper-Square Overall Length: 9.000 inches Cutting End Style: 1 solid center, single twist with screw point Cutting Diameter: 1.000 in. Twist Length: 4.500 inches Shank Large End Square Width: 0.406 inches Shank Small End Square Width: 0.219 inches Hardness: 40.0 Rockwell C min and 53 Rockwell C max. Material: High Speed Steel See Technical Specifications paragraph(s): T1.5 6. 5133-00-293-2900 Qty: 1 UI: EA BIT, AUGER DESCRIPTION Auger Bit Cutting End Style: Solid center, single twist with screw point Cutting diameter: 1/2 inch Twist length: 3-1/2 inches minimum to 4 inches maximum Overall length: 8 inches Shank Style: Taper-Square Material: High Speed Steel Hardness: Rockwell C 40 to 53 See Technical Specifications paragraph(s): T1.5 7. 5133-00-293-2901 Qty: 1 UI: EA BIT, AUGER: DESCRIPTION Bit Auger Shank Style: Taper-Square Overall Length: 7-1/2 inches Cutting End Style: 1 solid center, single twist with screw point Cutting Diameter: 1/4 in. Twist Length: 3.5 inches +/- 1/8 inch Shank Large End Square Width: 0.312 in. Shank Small End Square Width: 0.188 in. Hardness: 40.0 Rockwell C min and 53 Rockwell C max. Material: Steel Hardness test IAW ASTM E18 See Technical Specifications paragraph(s): T1.5 8. 5133-00-293-2905 Qty: 1 UI: EA BIT, AUGER: DESCRIPTION Bit Auger Shank Style: 81 Taper-Square Overall Length: 8.500 inches Cutting End Style: 1 solid center, single twist with screw point Cutting Diameter: 0.7500 in. Twist Length: 4.000 inches nom. Shank Large End Square Width: 0.375 inches nominal Shank Small End Square Width: 0.219 inches nominal Hardness: 40.0 Rockwell C min and 53 Rockwell C max. Material: Steel overall See Technical Specifications paragraph(s): T1.5 9. 5133-00-293-2902 Qty: 1 UI: EA BIT, AUGER DESCRIPTION Auger Bit Cutting end style: Solid center single twist with screw point; Cutting diameter: 3/8 inch; Twist length: 3-1/2 inches minimum to 3-3/4 inches maximum; Overall length: 7-3/4 inches; Shank Style: Taper-Square; Material: High Speed Steel Shank Width Large end Square: 0.344 inches nominal; small end 0.188 inches nominal Hardness: Rockwell C 40 to 53. See Technical Specifications paragraph(s): T1.5 10. 5133-00-293-2898 Qty: 1 UI: EA BIT, AUGER: DESCRIPTION Bit, Auger Shank Style: Taper-Square Overall Length: 8.250 In. Cutting End Style: 1 Solid Center Single Twist W/Screw Point Cutting Diameter: 0.6250 In. Twist Length: 3.500 In. Shank Large End Square Width: 0.375 In. Shank Small End Square Width: 0.219 In. Hardness Rating: 40.0 Rockwell C Min. and 53.0 Rockwell C Max. Material: Steel Overall See Technical Specifications paragraph(s): T1.5 11. 5133-00-293-2903 Qty: 1 UI: EA BIT, AUGER DESCRIPTION Auger Bit Overall Length: 8-3/4" Shank Style: Taper-Square Cutting End Style: 1 solid center single twist w/screw point Cutting Diameter: 7/8" Twist Length: 4-1/4" Shank Width Large End Square: 13/32" Shank Width Small End Square: 7/32" Material: Steel Overall Hardness: Rockwell C: 40 to 53 See Technical Specifications paragraph(s): T1.5 12. 5110-00-277-4588 Qty: 1 UI: BD BLADE, HAND HACKSAW DESCRIPTION Hand Hacksaw Blade Type: Flexible Length: 10 inch Number of Teeth: 24 per inch Material: composite blade, high speed steel 1 bundle shall contain 10 blades. See Technical Specifications paragraph(s): TE.6, T1.18 and T2.5 13. 5110-00-293-1958 Qty: 1 UI: EA BRACE, BIT, RATCHET: DESCRIPTION Type I: Ratchet bit brace Class 2: Box ratchet Style A: Ball bearing chuck 10 in. sweep See Technical Specifications paragraph(s): T1.20 14. 5140-01-168-4474 Qty: 2 UI: EA CARRIER, TOOL: DESCRIPTION For carrying a variety of tools; Material- Leather - Mildew resistant. Compartments shall consist of 8 pockets arranged in three rows as follows; 4 pockets in back row consisting of 2 large pockets - 5.500 inches long, 3.000 inches wide, 3.000 inches deep; with 2 side pockets - 5.500 inches long for screwdrivers located inside the large pockets; 2 pockets in middle row - 5.500 inches long, 3.000 inches wide 3.000 inches deep; 2 pockets in front row for pliers - 4.000 inches long, 2.000 inches wide, 1.000 inch deep, with a knife snap. Overall length - 9.750 inches; overall width - 6.750 inches. All dimensions are plus or minus 0.250 inch. Pouch will be slotted to fit belts up to 2 inches wide. Leather edges shall be scored as required. Klein Tools Part Number 5164 or Chase Leather Products Part Number GSA05 15. 5110-00-585-8427 Qty: 1 UI: EA CHISEL, BUTT, WOODWORKING: DESCRIPTION Type II: Wood Blade Length: 2.500 In. (+/- 0.25") Blade Width: 0.500 In. (+/- 0.05") Striking End Type: Steel Cap Blade Attachment Method: Tang Handle Material: Plastic See Technical Specifications paragraph(s): T1.14 16. 5140-00-212-5324 Qty: 1 UI: EA CHEST, TOOL KIT: DESCRIPTION In accordance with U.S. Army Troop Support Command mobility Equipment Research and Development Center drawing 13220E8279, Revision A, dated March 17, 1989. Exception to Drawing 13220E8279: Sheet 1, Notes: 1, Delete first sentence and substitute: Unless otherwise specified, all requirements of Commercial Item Description A-A-55822 shall apply. Sheet 1, Notes: 3, Delete in its entirety and substitute: Tray construction shall be in accordance with standard commercial practice. In sheet 1, change "S" handle dimensions for the front and back panels to 4 inches. The handles shall be positioned to allow maximum ground clearance and to preclude interference with the drawbolt. See Technical Specifications paragraph(s): T1.4 and T2.1 17. 5110-00-186-7107 Qty: 1 UI: EA CHISEL, COLD, HAND DESCRIPTION Type: I (Chisels). Class: 2 (Cold). Cutting Edge Width: 1/2" (+0.050", -0.030") Overall Length: 5-3/4" (+/-0.5") Material: Steel Shank Width Across Flats: 7/16" Shank Shape: Hexagonal See Technical Specifications paragraph(s): TE.6, T1.15 18. 5110-00-640-5419 Qty: 1 UI: EA CHISEL, FIRMER DESCRIPTION Blade Length: 3 in. (+/- 0.032 in.) Blade Width: 1 in. Striking End Type: Leather Cap Blade Attachment Method: Tang Handle Material: Wood. In accordance with GSA Purchase Description 5110-00-449-6907 Dated 3 Jul 2000, Table I, Item # 4. See Technical Specifications paragraph(s): TE.6 19. 5120-00-278-2423 Qty: 2 UI: EA CRIMPING TOOL, TERMINAL, HAND DESCRIPTION The crimping tool shall be capable of manually crimping insulated solder less terminals and splices sizes #22 to #10 AWG, shearing bolts sizes #10 to #4, and cutting & stripping wires sizes #22 to #10 AWG. The terminal crimping section of the tool shall have a nest of jaws capable of crimping #12 to #10 terminals in one jaw and #22 to #14 terminals in the other jaw(s). The bolt shearing section of the tool shall have five threaded holes for bolts sizes #10-24, #10-32, #8-32, #6-32, and #4-40. The wire cutting section of the tool shall have a 1/4 inch long, minimum, cutting jaw. The wire stripping section of the tool shall have six cavities for wire sizes 10, 12, 14, 16, 18, and 20-22 AWG. The tool shall be marked for function identification and/or size. The tool shall be made of heat-treated tool steel and shall have insulated cushioned grip handles. Overall length of the tool shall be 8 1/2 inches maximum. Klein Tools P/N 1001 or equal Offering on: Manufacturer's Name: ______________________________ Brand __________________________________________ Model or Part No. __________________________________ Table of product attributes included? ( Y / N ) ___________ See Technical Specifications paragraph(s): TE.6 20. 5110-00-288-6520 Qty: 2 UI: EA CUTTER, TUBE DESCRIPTION Tube Cutter Intended Use: designed for cutting soft metal tubing such as aluminum, lead, copper, or brass Consists of: frame, feed mechanism, cutter wheel, two rollers, three pins, and deburring tool Type: tube Class: enclosed feed mechanism Design: a smooth right angle cut Cutting Range: 1/8 to 1-1/8 inch outside tube diameter Overall Length: 6 inch maximum (fully opened position) Cutting Wheel: alloy steel; 55 to 64 HRC Rollers: support and freely rotate; steel; close flare cutoff feature; Deburring Tool: 50 to 58 HRC; easily replaceable; retractable; sharpened at least one edge; lock in working position; capable of deburring all sizes of tube within range of cutter. Features: spare cutting wheel 21. 5110-00-293-3410 Qty: 1 UI: EA DRILL, PUSH: DESCRIPTION Type: The drill shall consist of a handle, spring, actuating mechanism, chuck and a set of eight drill points. Material: Steel or as specified for each component. Handle: Hollow at the pressure end and capable of holding eight drill points. A removable screwcap, part of the handle, shall be provided to retain the drill points within the handle. Spring: Made of a material able to withstand compression, and capable of automatically returning the drill to its extended position. Acuating Mechanism: Fabricated from either, bronze or other metal of equal strength. The drive nut, spiral, and all other working parts shall be fully enclosed to prevent entry of dirt and grit. Chuck: Designed to prevent the shank of the drill points from cutting or marring the stripping surfaces of the chuck. The chuck shall be designed to permit parallel movement of the gripping surfaces and hold the shank of drill points firmly in position. Drill Point Set: Consists of eight drill points ranging in diameter from 1/16 to 11/64 inch, inclusive, in increments of 1/64 inch, and made of heat-treated steel. The drill point set, furnished in the hollow handle, shall be either of the fluted-shank style, or of the double-notch shank style to match the drill chuck furnished. Length: 8-12 inches. Weight: 1 pound maximum. See Technical Specifications paragraph(s): TE.6 22. 5110-00-241-9150 Qty: 1 UI: EA FILE, HAND DESCRIPTION Type I: Bastard-cut Pattern Type: American Face Cut Type: Double cut, bastard Heel to Point Length: 8 inch (+/- 0.125 in.) Style: Half-Round See Technical Specifications paragraph(s): TE.6, T1.1 23. 5110-00-234-6557 Qty: 1 UI: EA FILE, HAND DESCRIPTION Heel To Point Distance: 12.000 inches Pattern Type: American Face Cut Type: Double cut, Bastard Style: Round type See Technical Specifications paragraph(s): TE.6, T1.2 24. 5110-00-242-5385 Qty: 1 UI: DZ FILE, HAND (AMERICAN PATTERN), MILL: DESCRIPTION File is American pattern, mill and shall be used for general purpose filing and sharpening mill saws. File shall be carbon alloy steel and tapered in width at least one-third of the length to the point and thickness of file shall be uniform or tapered slightly from heel to the point. File shall be regular style, square edges, single cut. Flat sides shall be single-cut (one set of parallel cuts on the surface). Tang shall be of a conventional shape and size suitable for attachment to a wood handle. Tempered to a maximum hardness of 45 on the Rockwell C scale at a point approximately midway of its length and width. Teeth shall be uniformly chisel cut or etched cut and of uniform height throughout the fully cut portion. There shall be no defective, missing, or malformed teeth. All the teeth shall be hard, sharp, and free from decarburization or of such brittleness as might cause breakage under normal conditions of service. Cutting surfaces shall be hardened to a uniform hardness. Length of file shall be measured from point (free or front end) to the heel (junction of the tang with the body of file). File shall be of bastard type cut and have the following dimensions: Length 10 inches, plus or minus 1/8 inch. Width of file at largest section, 1 inch, plus or minus 1/16 inch. Thickness of file at largest section, 3/16 inch, plus or minus 1/16 inch. Number of teeth per inch on flats, 38 minimum, 41 maximum. Number of teeth per inch on edges, 38 minimum, 44 maximum. Allowable distortion of file,.015 inch maximum Allowable warpage of file, 2 degrees maximum. PRODUCT CONFORMANCE: The products provided shall meet the salient characteristics of this Item Purchase Description, conform to the producer's own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance. 25. 6230-00-270-5418 Qty: 2 UI: EA FLASHLIGHT: DESCRIPTION FLASHLIGHT: This Item Purchase Description covers a regular plastic case, tubular flashlight using two D size batteries. The flashlight shall include 1 spot lens, 1 diffused lens, 2 red filters, 1 blackout filter, and 1 blue filter. The flashlight shall be in accordance with the following salient characteristics: Unit of issue - EA (each). Flashlight case. The exterior surface of the case shall have molded flutes or ribs for ease in handling. The flutes or ribs shall be parallel to the longitudinal axis of the case and shall be raised approximately 1/32 inch from the surface of the case. Not less than five nor more than 20 flutes or ribs shall be provided around the circumference of the case. The flashlight, with batteries inserted, shall not sustain any damage to the base of the lamp, reflector or any internal part which could render the flashlight unserviceable when dropped 5 feet in free fall onto a vinyl tiled concrete floor. The flashlight shall be dropped twice in a horizontal position upon the switch/switch guard assembly, twice in a vertical position upon the head of the flashlight, and twice in a vertical position upon the base of the flashlight (lamp filament or lamp envelope damage shall not be a cause for rejection). The design of the case shall preclude metal parts of the flashlight from creating a closed circuit with the batteries, except with the switch in the "ON" or "FLASHING" position. The design of the case shall also preclude internal parts from abrading or otherwise damaging the batteries. Rivets and conducting metal strips along the inside wall of the flashlight cases shall be prevented from direct contact with the batteries. This may be accomplished by a protective plastic sleeve into which the batteries are inserted, after which the sleeve itself is inserted into the case, or by grooves or slots into which the rivets and conducting metal strips are safely kept away from contact with the batteries, or by some other means at the manufacturer's discretion. The flashlight case shall be fabricated from acrylonitrile-butadiene-styrene. Lens caps, end caps, retainers, and other plastic parts. Flashlights shall have a means such as threaded lens caps and filter caps for the securing the lenses, reflectors, and filters (where used) in place. The flashlight shall have a means such as threaded end caps and battery retainers for securing the dry cells and providing stowage for the spare lamp. The flashlight shall have a stowage compartment for the stowage of diffusing lens and filters. All flashlights shall be initially fitted with the spotlight lens. External surfaces of all caps and retainers shall be fluted, ribbed or knurled for securely gripping. All lens caps, end caps, battery retainers, filter caps and lampholders shall be fabricated from acrylonitrile-butadiene-styrene. Lamp-head housing. The lamp-head housing shall be constructed of acrylonitrile-butadiene-styrene or a corrosion-resistant metal. The housing shall permit replacement of the lamp. The lamp shall not become loose or displaced during rough handling when dropped as described in the Flashlight case paragraph. Storage compartment. The flashlight shall have a storage compartment in the end cap for storing one lens and four filters. Holder for spare lamp. Each flashlight shall be furnished with a spare lamp (see Lamps paragraph). The spare lamp shall be mounted in a holder inside the battery retainer cap in such a manner so as to be accessible, and shall not become loose or displaced when dropped as described in the Flashlight case paragraph. Gaskets. Gaskets shall be provided on all flashlights, where necessary, to prevent the entrance of moisture into the interior of the flashlight or into the switch contacts. Gaskets shall be fabricated from rubber composition conforming to ASTM D2000, grades M3AA510B13C12F17, M3AA610B13C12F17, or M3AA710B13C12F17. Switches. Switches shall be mounted on the side of the case and shall be of the push-slide type and shall be operable with one hand. Life expectancy of the switch shall be 25,000 cycles.. The switch shall not have internal electrical leakage. The switch shall be guarded to protect it from damage. Switches shall provide locked "OFF", "FLASHING" and positive "ON" positions. The flashlight shall not go off when shaken vigorously while the switch is in either the "ON" or "FLASHING" position. Threads. Threads on each flashlight shall be tight, when a torque of 30 2 lb-in is applied to mating parts. Threads shall not strip or ride over those of the mating part when a torque of 50 2 lb-in is applied. Reflector. The reflector shall be made of metal or plastic and the contour shall be essentially parabolic, projecting a beam of light as specified in the Spotlight paragraph. The reflecting surface shall be vacuum plated or electro-plated to assure a coefficient of reflection of at least 75. The reflector shall have sufficient rigidity to prevent distortion when the lamp batteries are in place. The reflecting surface shall be smooth and free from bubbles and pits. Suspension ring. A suspension ring, made of either phosphor bronze or brass shall be secured to the bottom cap of each flashlight. Each ring shall be of one-piece construction and shall be fastened so that it cannot be readily detached by hand. The ring shall seat firmly to and recess in the bottom cap when not in use, and shall support a weight of 25 pounds without evidence of distortion. Watertightness. All flashlights shall be watertight and show no evidence of moisture within any case or any attachment with the exception of the storage compartment and filter cap when submerged to a depth of 3 feet in a salt water solution (1.04 specific gravity) at room temperature (77 5 F) for 1 hour. Before submergence a torque of 30 2 lb-in shall be applied to all threaded parts of the flashlight, complete with a lamp and batteries. Impact. All flashlights shall not be damaged or show evidence of moisture inside the flashlight except as specified in the Watertightness paragraph when subjected to the tests in the following subparagraphs. Impact test conditions. The flashlight, without batteries installed, shall be placed in a cold chamber at -40 5 F for 2 hours. With the flashlight stabilized at this temperature, immediately subject it to the following low and high impact tests. The point of impact shall be applied to: a. The outside of the flashlight case at a point midway between the ends of the case on a side 90 from the switch. b. The lens cap or filter cap. c. The end cap. Low impact. Subject the flashlight to a 12 in-lb impact using a 1 lb steel ball at each of the points of impact specified above. Provided the flashlight remains intact, next subject the flashlight to the test in the Watertightness paragraph. Evidence of breakage from impact or nonconformance to the Watertightness paragraph shall constitute failure of this test. High impact. The flashlight, having passed the low-impact test, shall be again placed in the cold chamber and conditioned at -40 5 F for 2 hours and then immediately subjected to a 20 in-lb impact using a 1 lb steel ball at each of the points of impact specified above. Install fresh batteries and determine whether the flashlight operates as specified herein. Failure of the flashlight to operate as specified herein or damage to the case, the lens or filter cap, or the end cap shall constitute failure of this test. Battery-contact spring. The battery-contact spring for all flashlights shall have a minimum compression of 3/8 inch and exert a minimum force of 2 lb against the battery. The spring configuration shall be of a design which will not allow damage to the battery when dropped as described in Flashlight case paragraph. The spring shall be of a design wherein no sharp or rough portion may pierce, lacerate, or protrude into the bottom battery while batteries are installed and spring is compressed. Lamps. Each flashlight shall be supplied with two PR-6 lamps, one installed in the lamp head, the other in the spare lamp holder. Environmental. Temperature. All flashlights shall operate as specified herein at a temperature of 150 5 F. Humidity. All flashlights shall operate as specified herein at a temperature of 110 2 F and a relative humidity of 85 5%. Corrosion resistance. Metals used in the fabrication of flashlights shall be corrosion resistant or treated to resist corrosion. The metals shall be of an alloy with properties to provide the required strength and rigidity. Unless protected against electrolytic corrosion, dissimilar metals shall not be used in contact with each other. All exterior metal surfaces shall be given a durable chemical blackening or black oxide finish. Flashlights shall be capable of withstanding a 200 hour salt spray test specified in ASTM B117 without detrimental effect on any of the performance requirements specified herein. Light projection. Spotlight. When using the spotlight lens located 5 feet from a screen, the plane of which is perpendicular to the optical axis of the flashlight, the flashlight shall project a concentrated beam of light not less than 5 nor greater than 11 inches in diameter. Diffused light. When using the diffusion lens located 4 feet from a screen, the plane of which is perpendicular to the optical axis of the flashlight, the flashlight shall project a distributed beam of light 60 to 80 inches in diameter. The light pattern shall have a uniform distribution of light except at the center where some concentration of light is desirable. Spotlight and diffusion lenses. Spotlight lens. The spotlight lens shall be fabricated from polycarbonate conforming to ASTM D3935. The dimensions for the spotlight lens shall be approximately 1.690 inches in diameter and 0.064 inch thick. The light transmission shall be at least 83 percent. Diffusion lens. The diffusion lens shall be fabricated from polycarbonate conforming to ASTM D3935 and shall diffuse light as described in the Diffused light paragraph. The light transmission shall be at least 83 percent. Filters. Filters shall be circular, having a diameter of 1.725 0.025 inch and a thickness of 0.030 0.01 inch. Filters shall be fabricated from plastic conforming to ASTM D3935. Red filter. The filter shall be aviation red, type I, conforming to SAE-AS25050 and shall have the following spectral transmission qualities: a. Not over 0.2 percent transmission between wavelengths of 440 to 580 nanometers. b. Not over 15 percent transmission at a wavelength of 600 nanometers. c. Not under 80 percent transmission at a wavelength of 650 nanometers, as determined by tests specified in SAE-AS25050. Blackout filter. The filter shall be opaque and shall have a light transmission of from 0.02 to 0.27 percent over the entire visible spectrum when tested using an illuminometer. Blue filter. The filter shall be aviation blue, type I, conforming to SAE-AS25050. Color of flashlights. The color of the plastic case, lens cap, end cap, and any exposed plastic switch shall be gray. Fungus and moisture resistance. The electrical circuitry, including all components and connections, except as specified below, shall be protected from the effects of fungus growth and moisture by an overall treatment with a varnish conforming to ASTM D3955, Grade as applicable: a. Components or circuit elements that are inherently fungus and moisture resistant or which are hermetically sealed need not be treated. b. Components or circuit elements whose functions will be adversely affected by the varnish coating shall not be treated. Identification. Flashlights shall be marked in accordance with MIL-STD-130, except that only the nomenclature and contractor's identification shall be included as information and molded on the outside of the flashlight case. Measurement system. The values stated in inch-pound units are to be regarded as the standard. The metric values stated in parentheses are for informational purposes only. Metric products. Products manufactured to metric dimensions will be considered on an equal basis with those manufactured using inch-pound units, providing they fall within the tolerances specified and all other requirements of this document are met. If a product is manufactured to metric dimensions and those dimensions exceed the tolerances specified in the inch-pound units, a request should be made to the contracting officer to determine if the product is acceptable. Workmanship. The finished flashlight shall not contain rough edges, blemishes, or other disfigurations which could affect serviceability or appearance. All parts shall be clean, free from rust, toolmarks, pits and other injurious defects. External surfaces shall be free of burrs, sharp edges and corners except where sharp edges or corners are required or where they are not detrimental to safety. REGULATORY REQUIREMENTS Regulatory requirements. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR). QUALITY ASSURANCE PROVISIONS PRODUCT CONFORMANCE: The products provided shall meet the salient characteristics of this Item Purchase Description, conform to the producer's own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance. 26. 5110-00-289-9657 Qty: 1 UI: EA FRAME, HAND HACKSAW DESCRIPTION Hand Hacksaw Frame The frame shall be designed with a thumb-nut-tension device for blade length adjustment. The frame shall be flat or round and provide for adjustable blade length of 10-12 inches. The depth from the teeth of the blade to nearest inside edge or projection of the frame shall be 3.0 inches minimum and 3-7/8 inches maximum. The minimum tension between the saw grips shall be 225 pounds. The frame shall be equipped with an open handle grip of hard rubber or plastic composition material. A friction washer shall be used between thumbnut and frame. The frame shall have a bright chromium or nickel plate finish on exterior surfaces, except the blade holders which may be bright zinc plated. The frame shall be free from imperfections which may affect its serviceability, durability or appearance. Contractor shall demonstrate in a test set-up that the saw frame is capable of being tensioned up to 225 pounds minimum without loss of serviceability. See Technical Specifications paragraph(s): TE.6 27. 8415-00-268-7869 Qty: 2 UI: PR GLOVES, MEN'S AND WOMEN'S: DESCRIPTION Shall be in accordance with Commercial Item Description (CID)A-A-55060 dated June 19, 1992. Design I: -One piece back and front, contiuous thumb inseam with welt insert, full grain leather. Size: 3 28. 5120-00-892-5485 Qty: 2 UI: EA HAMMER, HAND: DESCRIPTION Curved Claw Carpenter's Nail Hammer; Head Weight: 16 ounces, +/- 1-1/2 ounces; Handle Material: Fiberglass; Overall length: 13.0 inches, +/- 1 inch. See Technical Specifications paragraph(s): T1.13 29. 5110-00-595-8325 Qty: 1 UI: EA HANDLE, FILE, WOOD DESCRIPTION File Handle The handle shall consist of a body containing jaws or chuck, and an actuating mechanism for securely gripping and holding the jaws during filing operation. Handle shall be shaped and proportioned to provide a comfortable grip. The handle shall be wood or high-impact plastic. Handles made of wood shall be of hardwood or any other wood normally used for file handles. Dimensions of handle with tang-holding device or jaws retracted into handle to lowest position shall be overall length 4 1/8 inches, commercial tolerance, and a minimum diameter of 1 inch at the largest portion of the body. The handle shall be fitted with tang-holding jaws or chuck extending axially into the handle body for a sufficient depth to provide adequate support and grip of the file during filing operation. The jaws shall be properly hardened to prevent deformation and wear under normal service conditions. Gripping surfaces may be notched or serrated to assure holding the file securely. Jaws for handles shall be steel; the ferrule and adjusting mechanism may be either die cast zinc based metal alloy, or 22-gauge steel. Each ferrule shall be securely impressed around the jaw end of the handle to prevent splitting of the wood or plastic. The tang mechanism for the handle shall be metal. The adjusting mechanism shall consist of a threaded metal sleeve or screw, and adjusting cap, which by tightening will exert the required pressure on the jaws and securely grip the file during filing operations. Screw threads shall be in accordance with applicable requirements of the National Bureau of Standards Handbook H28. The lengthwise movement of the adjusting mechanism shall cause contraction or expansion of the gripping portion of the jaws. Handles shall be smoothly finished. No cracks or splinters shall be visible. All metal portions shall be free from burrs and sharp edges. See Technical Specifications paragraph(s): TE.6 30. 5120-00-935-4641 Qty: 1 UI: SE KEY SET, SOCKET HEAD SCREW DESCRIPTION Handle Type: L-Style Container Type: Wrap, roll, envelope or pouch Key Characteristic: Contains 20 Hex Keys Size - 0.028, 0.035, 0.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4 inches. Special Features: Short Series See Technical Specifications paragraph(s): TE.6, T1.17 List of Components of 5120-00-935-4641: 30.1. 5120-00-224-2504 Qty: 1 UI: EA KEY, SOCKET HEAD SCREW DESCRIPTION Socket Head Screw Key Size - 5/64 inch Hexagon Key; L-type; short series See Technical Specifications paragraph(s): TE.6, T1.17 30.2. 5120-00-198-5392 Qty: 1 UI: EA KEY, SOCKET HEAD SCREW DESCRIPTION Socket Head Screw Key Size - 5/32 inch, Hexagon key L-type; short series Surface Treatment: Oxide See Technical Specifications paragraph(s): TE.6, T1.17 30.3. 5120-00-240-5274 Qty: 1 UI: EA KEY, SOCKET HEAD SCREW DESCRIPTION Socket Head Screw Key Size - 5/16 inch L-type; Short series Surface Treatment: Oxide See Technical Specifications paragraph(s): TE.6, T1.17 30.4. 5120-00-198-5390 Qty: 1 UI: EA KEY, SOCKET HEAD SCREW DESCRIPTION Socket Head Screw Key Size - 3/8 inch, Hexagon key; L-type; Short series See Technical Specifications paragraph(s): TE.6, T1.17 30.5. 5120-00-222-1489 Qty: 1 UI: EA KEY, SOCKET HEAD SCREW DESCRIPTION Hexagon socket screw key Overall Length: 7.903 inches thru 8.094 inches Long Arm Length: 7.156 inches thru 7.344 inches Short Arm Length: 2.031 inches thru 2.219 inches Wrenching Surface Size: 0.750 inch both ends Wrenching Surface Shape: Hexagon both ends external Material: Steel overall See Technical Specifications paragraph(s):, T1.17 30.6. 5120-00-224-2510 Qty: 1 UI: EA KEY, SOCKET HEAD SCREW DESCRIPTION Style: L-handle, short series Wrenching Size: 5/8 inch Wrenching Shape: Hexagon Material: Steel Finish: Oxide See Technical Specifications paragraph(s): TE.6, T1.17 30.7. 5120-00-240-5277 Qty: 1 UI: EA KEY, SOCKET HEAD SCREW DESCRIPTION Key, Socket Head Screw Size - 7/16, Hexagon key; L-type; Short Series. See Technical Specifications paragraph(s):, T1.17 30.8. 5120-00-242-7411 Qty: 1 UI: EA KEY, SOCKET HEAD SCREW DESCRIPTION Size - 7/32 inch, Hexagon key; L-type; Short series Surface Treatment: Oxide See Technical Specifications paragraph(s): TE.6, T1.17 30.9. 5120-00-240-5268 Qty: 1 UI: EA KEY, SOCKET HEAD SCREW DESCRIPTION Socket Head Screw Key Size: 9/16 inch; Hexagon Key L-Type: Short Series Material: Steel overall Surface Treatment: Oxide See Technical Specifications paragraph(s): TE.6, T1.17 30.10. 5120-00-889-2163 Qty: 1 UI: EA KEY, SOCKET HEAD SCREW DESCRIPTION Socket Head Screw Key Size - 9/64 inch, Hexagon key; L-type; Short series Material: Steel overall Surface Treatment: Oxide overall See Technical Specifications paragraph(s): TE.6, T1.17 30.11. 5120-00-224-4659 Qty: 1 UI: EA KEY, SOCKET HEAD SCREW DESCRIPTION Socket Head Screw Key Size - 1/4 inch; hexagon key L-type; Short series Surface Treatment: Oxide See Technical Specifications paragraph(s): TE.6, T1.17 30.12. 5120-00-555-2639 Qty: 1 UI: EA KEY, SOCKET HEAD SCREW DESCRIPTION Size: 0.028 in. Hexagon Key L-type; Short Series Material: Steel Surface Treatment: Oxide See Technical Specifications paragraph(s): TE.6, T1.17 30.13. 5120-00-198-5400 Qty: 1 UI: EA KEY, SOCKET HEAD SCREW DESCRIPTION Style: L-handle, short series. Wrenching Surface Size: 0.035". Wrenching Surface Shape: Hexagon Material: Steel Finish: Oxide. See Technical Specifications paragraph(s): TE.6, T1.17 30.14. 5120-00-198-5401 Qty: 1 UI: EA KEY, SOCKET HEAD SCREW DESCRIPTION Socket Head Screw Key Size: 0.050 in.; Hexagon key; L-type; short series See Technical Specifications paragraph(s): TE.6, T1.17 30.15. 5120-00-198-5398 Qty: 1 UI: EA KEY, SOCKET HEAD SCREW DESCRIPTION Socket Head Screw Key Size: 1/16 inch, Hexagon key; L-type; short series See Technical Specifications paragraph(s): TE.6, T1.17 30.16. 5120-00-240-5292 Qty: 1 UI: EA KEY, SOCKET HEAD SCREW DESCRIPTION Key, Socket Head Screw Size: 1/8 inch, Hexagon key L-type: Short series Surface Treatment: Oxide See Technical Specifications paragraph(s): TE.6, T1.17 30.17. 5120-00-240-5300 Qty: 1 UI: EA KEY, SOCKET HEAD SCREW DESCRIPTION Socket Head Screw Key Size: 3/16 inch, Hexagon key L-type; Short series Surface Treatment: Oxide See Technical Specifications paragraph(s): TE.6, T1.17 30.18. 5120-00-242-7410 Qty: 1 UI: EA KEY, SOCKET HEAD SCREW DESCRIPTION Socket Head Screw Key Size - 3/32 inch, Hexagon key; L-type; short series Surface Treatment: Oxide See Technical Specifications paragraph(s): TE.6, T1.17 30.19. 5120-00-889-2162 Qty: 1 UI: PG KEY, SOCKET HEAD SCREW DESCRIPTION Socket Head Screw Key Size - 7/64, Hexagon key; L-type; Short series. See Technical Specifications paragraph(s): TE.6, T1.17 30.20. 5120-00-198-5391 Qty: 1 UI: EA KEY, SOCKET HEAD SCREW DESCRIPTION Table 8 (Short Series). Style: L-handle. Wrenching Surface Size: 1/2 inch both ends. Wrenching Shape: Hexagon both ends external. Finish: Oxide See Technical Specifications paragraph(s): TE.6, T1.17 End of 5120-00-935-4641 Components List _____________________________________________________ 31. 6625-00-951-4472 Qty: 1 UI: EA MULTIMETER DESCRIPTION Digital Display Analog Multimeter, Accuracy, +/- 3% Full Scale, Two test leads. Shall come in carrying case. Case Material: Plastic. Current: 400 Amps (AC) Voltage:600 Volts (AC/DC) Resistance: 40 (M)Ohms Frequency Measurement: Required Jaw capacity: 1 inch Amprobe Model ACD-14 FX or equal Offering on: Manufacturer's Name: ______________________________ Brand __________________________________________ Model or Part No. __________________________________ Table of product attributes included? ( Y / N ) ___________ 32. 5110-00-240-5943 Qty: 2 UI: EA KNIFE, POCKET DESCRIPTION In accordance with GSA Purchase Description 5110-00-240-5943 dated 17 Dec 1997. Blade Length: 2.375" (+/-1/8") Blade Quantity: 2 Tool Type: Screwdriver and Wire Scraper Clevis: Provided 33. 5210-00-516-3356 Qty: 2 UI: EA LEVEL AND PLUMB, TORPEDO: DESCRIPTION Type: Torpedo (pocket) A level is an instrument or device for determining the truth of a horizontal plane or any deviation there from. A plumb, as a component part of a level and plumb, is an instrument or tool for establishing the truth of a plane perpendicular to the aforementioned horizontal plane or any deviation from same. Size - 9 inches. Shall consist of a stock, one level vial, one plumb vial, and one 45 degree vial. Stock - The stock shall be of wood, aluminum or magnesium. The base shall be flat and smoothly finished. The base shall have a 'V' or concave groove throughout its entire length. The stock shall be designed to provide strength and rigidity. The stock shall be designed to prevent warping and to properly support vials & vial holders. Vial lenses - Vial lenses shall be of glass or plastic that will not scratch excessively or become marred or discolor during use. Lenses shall be firmly held in place and shall not become loose during normal use. Vial Holders - Vial holders shall be made of aluminum, aluminum alloy, zinc alloy, steel or plastic and mounted as to assure side reading. Steel parts shall be coated to prevent corrosion. Vials - The vials shall be mounted so that the bubble is clearly visible and shall be filled with a nonfreezing solution equivalent in viscosity to 25 percent ether or 50 percent alcohol. The liquid shall be either clear or amber colored and shall not discolor, cloud, or change in fluidity with age or at a temperature as low as -20 degrees F and +150 degrees F. The liquid shall form a well-defined bubble of a size to lie just within the inside edge of the defining centering lines of the vial. Levels and plumbs shall be commercial bent-glass tubes or a molded acrylic cylindrical vial, perfectly constant and concentric with an internal arc creating a vial with a cylindrical outside diameter and a barrel-shaped inside diameter and shall be permanently marked with two black bubble-defining centering lines. The level vial shall be bent to a radius of 7.645 inches minimum, equivalent to a vial sensitivity of 45 minutes maximum. The plumb and 45 degree vial shall be bent to a radius of 5.8 inches, minimum, equivalent to a vial sensitivity of 1 degree. The radius of curvature shall be uniform along the length of the vial body. The vials shall be fixed. Fixed Vials - The fixed vials shall be firmly and permanently set in the stock of the level. Tolerances - Vial setting maximum 0.009 inch, concavity and parallelism maximum tolerance 0.005 inch. Accuracy - The level of accuracy is the measure of the allowable deviation or tolerance on the level reading itself. It is determined by the setting of the vial within the stock as checked against a true horizontal or vertical plane within the above tolerances. Vial Sensitivity - Measurement of vial sensitivity is the amount of angular movement in a vertical plane required to move the vial bubble 1/10 inch. Angular movement may be expressed in degrees, minutes, or seconds. The sensitivity of the bubble motion in the vial is determined by the vial radius; the larger the radius, the smaller the angle required to move the bubble 1/10 inch. 34. 6625-00-224-6246 Qty: 2 UI: EA LIGHT, TEST: DESCRIPTION For testing AC and DC electrical circuits in voltage range - 100 volts minimum, 550 volts maximum. Consists of two flexible wire leads with attached probe tips, and one indicator lamp; minimum length - 5 inches. 35. 5340-01-052-0671 Qty: 1 UI: SE PADLOCK SET: DESCRIPTION In accordance with U.S. Army Tank Automotive Command drawing 11681231, Revision A, dated 06/29/89. Part number 11681231-2. Padlock set shall include 4 padlocks, keyed alike, equipped with 2 keys per set, w/ clevis and chain. 36. 5110-00-224-1532 Qty: 2 UI: EA PLIERS, DIAGONAL CUTTING: DESCRIPTION Type I: Diagonal cutting, regular nose Class 1: Standard cutting edges Nominal Size: 6 inches Feature: Comfort grip handles See Technical Specifications paragraph(s): TE.6, T1.6 37. 5120-00-184-9403 Qty: 2 UI: EA PLIERS DESCRIPTION Type III: Round nose Class 4: Needle nose Style B: With cutter Nominal size: 6-1/2 inches Cushion grip handles. See Technical Specifications paragraph(s): TE.6, T1.7 38. 5120-00-223-7396 Qty: 2 UI: EA PLIERS, SLIP JOINT DESCRIPTION Type II: Slip-joint, combination jaw Class 1: Straight nose Style A: Regular Overall Length: 6.00 inches (+/-1.0 inch) Cushion grip handles, with cutter. See Technical Specifications paragraph(s): TE.6, T1.11 39. 5120-00-781-0819 Qty: 2 UI: EA PLIERS, SLIP JOINT DESCRIPTION Type: I ( Adjustable joint, angle nose) Class: 1 ( Multiple grooves and tongue) Style: A (Straight, serrated jaws) Nominal size - 12 inches Cushion grip handles. See Technical Specifications paragraph(s): T1.10 and T2.3 40. 5120-00-239-8251 Qty: 2 UI: EA PLIERS DESCRIPTION Type I: Lineman's Class 1: Square head Overall Length: 8.00 inches (+/-1/2 inch) Cushion grip handles. See Technical Specifications paragraph(s): TE.6, T1.9 41. 5140-01-012-7038 Qty: 2 UI: EA POUCH, LINEMAN'S, BELT LOOPED: DESCRIPTION Pouch, Lineman's, Belt Looped Construction: Number 8 canvas with 1/4 inch rope ring sewn into top, snap-on belt loops, with ventilating eyelets in bottom. Size: 9 inches by 10 inches, with top opening 8 inches by 3 inches. Klein Tools Inc Part Number 5142 or Estex Mfg Co Inc Part Number 1061-GSA or equal. Offering on: Manufacturer's Name: ______________________________ Brand __________________________________________ Model or Part No. __________________________________ Table of product attributes included? ( Y / N ) ___________ 42. 5120-00-224-9453 Qty: 1 UI: EA PULLER, FUSE: DESCRIPTION Type I: Laminated construction Size 1: 1/4 inch through 1/2 inch, fuse diameter range Jaw thickness: 0.425 inch maximum Overall length: 4-1/2 inches Fuses pulled 0-30 ampere, 250 volt See Technical Specifications paragraph(s): T1.22 43. 5110-00-288-8737 Qty: 1 UI: EA PUNCH AND DIE, KNOCKOUT: DESCRIPTION Type I: Light duty chassis Class 1: Round hole Hole Diameter: 1/2 inch See Technical Specifications paragraph(s): TE.6, T1.21 44. 5110-00-243-1645 Qty: 1 UI: EA PUNCH AND DIE, KNOCKOUT DESCRIPTION Type: I (Light duty - chassis) Class: 1 (Round hole) Hole Diameter: 3/4 in. Special Features: Standard type See Technical Specifications paragraph(s): TE.6, T1.21 45. 5110-00-293-0108 Qty: 1 UI: EA PUNCH AND DIE, KNOCKOUT DESCRIPTION Type: I (Light duty - chassis) Class: 1 (Round hole) Hole Diameter: 1.000 in. See Technical Specifications paragraph(s): TE.6, T1.21 46. 5110-00-293-0103 Qty: 1 UI: EA PUNCH AND DIE, KNOCKOUT: DESCRIPTION Type I: Light duty - chassis Class 1: Round hole Hole Diameter: 1-1/4 inches See Technical Specifications paragraph(s): TE.6, T1.21 47. 5110-00-233-9718 Qty: 1 UI: EA RASP, HAND, WOOD: DESCRIPTION Largest Diameter: 1.187 inches Heel To Point Distance: 12.000 inches (+/- 0.125 inch) Largest Thickness: 0.406 inch Face Cut Type: Bastard Edge Cut Type: Single cut Style: Flat wood See Technical Specifications paragraph(s): TE.6, T1.3 48. 5140-00-408-1905 Qty: 1 UI: EA ROLL, TOOLS AND ACCESSORIES: DESCRIPTION In accordance with Department of the Army Signal Corps Engineering Laboratories drawing number SC-D-90845, dated 5/22/52 and SC-D-90846, dated 5/21/52. See Technical Specifications paragraph(s): T2.4 49. 5210-00-293-3393 Qty: 2 UI: EA RULE, MULTIPLE FOLDING: DESCRIPTION Standard duty, outside reading, multiple folding wood ruler Joints: metal plated joints and tempered inner springs every 6 inches to hold the ruler open or closed Length: 72 inches Width: 5/8 inch Thickness: 0.095 inch prior to finishing Graduations: 1/16 inch Scale error: Any graduated edge at any 2 foot interval shall be no more than 1/32 inch Finish: enamel or lacquer finish and shall be yellow or white Outside Reading: numbering and figures shall commence on the outside of the folds Markings shall be on both edges and on both sides. Markings on one face shall read in a direction opposite those on the other face. Markings shall be impressed into the surface of the folds, visible to the naked eye. Ends shall have secured tips of same material as joints to prevent split ends and permit readability of graduations. Each fold shall have strike plates to prevent any contact between faces of adjacent folds. Strike plates are to be the same material as joints. See Technical Specifications paragraph(s): TE.6 50. 5110-00-293-0090 Qty: 1 UI: SE SAWS, NESTED: DESCRIPTION The nested saw shall consist of three blades and a detachable hardwood or plastic handle. The blades shall consist of a compass blade, a wallboard blade, and a metal & plastic cutting blade. The handle end of each blade shall be properly designed to fit the handle and provided a device to quickly and securely attach the handle to the blade. Compass Blade: 12 inches long, 8 points per inch Wallboard Blade: 10 inches long, 10 points per inch Metal and plastic cutting Blade: 6 inches long, 25 points per inch 51. 5120-00-278-1270 Qty: 2 UI: EA SCREWDRIVER, FLAT TIP DESCRIPTION Type I: Tip, Cabinet, Straight Sides Tip width: 3/16 (0.188) inch; Tip thickness: 0.030 inch; Blade length: 5 inch (+/- 1/4 in.) Plastic Handle See Technical Specifications paragraph(s): TE.6, T1.8 52. 5120-00-236-2127 Qty: 2 UI: EA SCREWDRIVER, FLAT TIP DESCRIPTION Type I: Cabinet, Straight Sides (Plain) Exposed blade length: 3 inches, (+/-) 1/4 inch Tip width: 3/16 in. Tip thickness: 0.030 Shank Shape: Round See Technical Specifications paragraph(s): TE.6, T1.8 53. 5120-00-260-4837 Qty: 2 UI: EA SCREWDRIVER, FLAT TIP DESCRIPTION Type I: Cabinet, Straight Sides Tip Width: 3/16 inch (0.188 in.) Blade length: 8 inches ( +/- 1/4 inch) End Thickness: 0.030 inch Features Provided: Straight tip sides and straight fluted handle. Shank Shape: Round Plastic Handle See Technical Specifications paragraph(s): T1.8 54. 5120-00-240-8716 Qty: 2 UI: EA SCREWDRIVER, CROSS TIP DESCRIPTION Type I: Phillips (PH) Class 1: Plain Tip Size: 1 Blade Length: 3" Blade Material: Steel Handle Material: Plastic See Technical Specifications paragraph(s): TE.6, T1.12 55. 5120-00-234-8912 Qty: 2 UI: EA SCREWDRIVER, CROSS TIP DESCRIPTION Type I: Phillips (PH) Class 1: Plain Tip Size: 3 Blade Length: 6" Blade Material: Steel Handle Material: Plastic See Technical Specifications paragraph(s): TE.6, T1.12 56. 5120-00-596-1584 Qty: 1 UI: EA TAPE, FISH, STEEL: DESCRIPTION In accordance with GSA Purchase Description 5120-00-287-4678, dated 10/23/98. 57. 5120-00-287-4678 Qty: 1 UI: EA TAPE, FISH STEEL: DESCRIPTION Type: Tape Fish Width: 0.250 inches Thickness: 0.062 inches Length: 100.000 feet Reel: Included Special Features: Flat Tape 58. 5210-00-150-2920 Qty: 2 UI: EA TAPE, MEASURING: DESCRIPTION Measuring Tape Tape Width: 3/4" (+/-1/64") Length: 16.00' (+/-1/4") Graduation: 16ths of an inch (first 6 inches graduated in 32nds); Top face - feet and inches on one edge and in consecutive inches on other edge. Accuracy: Scale error- shall not exceed 1/32 inch Material: Steel Features: black or red stud (16 inch) markings, case chrome plated, butt-end case, automatic winding, blade lock, belt clip 59. 5140-01-237-3233 Qty: 2 UI: EA TOOL BOX, PORTABLE: DESCRIPTION Material: Steel, 16 Gauge Sheet Finish: Baked Enamel Color: Manufacturers Option Overall Length: 42 inches (+/- 1 inch) Width: 19 inches (+/- 1 inch) Height: 19 inches (+/- 1 inch) Weight: 98 pounds approximately The Body shall be offset to allow the lid to overlap and to close flush hinge: One, continuous for the length of the box, welded to the lid and body lid opening: 90 degrees minimum, 100 degrees maximum, and shall include a mechanism which will sustain the lid in the open position, and permit ease of manual closure The box body shall have formed reinforcing ribs welded to each internal side, and to the inside lid cover. Two skids shall extend the full width of the bottom of the box, one at each end. Each skid shall have holes provided for caster attachment. Two lifting handles shall be recess mounted at each end of the box, and shall rotate 90 degrees approximately for the carrying position. One lid-operating handle shall be centered at the front vertical face of the lid, securely fastened with option for removal. The locking mechanism shall be an enclosed shackle padlock system. The base of the key operated lock shall be flush with the box's outer surface. Two lock systems shall be provided, located one at each end above the lifting handles. Four casters shall be provided: two swivel and two rigid with mounting bolts. Width of caster wheels: 1-1/4 inch minimum Diameter of Wheels: 4 inches minimum Load Capacity: 200 pounds minimum The wheels shall have roller or ball bearings. Two tool trays, steel, 16 Gauge. Finish: baked enamel Color: identical to the box. Internal Dimensions: length: 15-3/4 inches (+/- 1/8 inch) Width: 8 inches plus or minus 1/8 inch Depth: 4 inches plus or minus 1/8 inch, with carrying handle. The trays shall be designed with a flange that is supported by the top edge of the box, and is secured in place under the lid when closed. 60. 5120-00-240-1414 Qty: 1 UI: EA WRENCH, ADJUSTABLE DESCRIPTION Type 1: Standard Openings Jaw Capacity: 2-1/16 inches Length: 18.00 inches Material: Steel Coating: Chrome See Technical Specifications paragraph(s): TE.6, T1.16 and T2.2 61. 5120-00-449-8083 Qty: 2 UI: EA WRENCH, ADJUSTABLE DESCRIPTION Type 1: Standard Openings Jaw Capacity: 1-1/8 Length: 10 inch Material: Steel Coating: Chrome See Technical Specifications paragraph(s): TE.6, T1.16 and T2.2 62. 5120-00-277-1461 Qty: 1 UI: EA WRENCH, PIPE: DESCRIPTION This is a heavy duty and severe service wrench that has a 90 degree jaw opening to the axis of the handle. It shall consist of a bar (or handle), fixed jaw, a frame, a moveable jaw and an adjusting nut. Overall length: 18 inch minimum Pipe size: 1 to 2 inch minimum size range. Maximum weight: 6 pound, 4 ounce. Bending moment: 20,000 inch-pound The bar or handle shall be made of cast malleable iron, ductile iron or steel. If the handle is made of steel, it shall be heat treated to 25-40 HRC. The moveable jaw shall be drop forged steel heat treated to 40-49 HRC on the shank; adjacent to the teeth heat treated to 48-60 HRC. The frame or housing shall be forged or cast integral with the bar or handle. The bar or handle shall be provided with a hardened-steel replaceable jaw insert secured by means of a steel pin or rivet. The teeth on the jaw insert shall have a hardness of 48-60 HRC. Case hardened jaws shall not be acceptable. Adjusting nut- Steel, heat treated to 32-48 HRC. Finish-Surface characteristics, protective coatings, and platings shall be in conformance with standard commercial practice. See Technical Specifications paragraph(s): TE.6 63. 5120-00-277-1485 Qty: 1 UI: EA WRENCH, PIPE: DESCRIPTION This is a heavy duty and severe service wrench that has a 90 degree jaw opening to the axis of the handle. It shall consist of a bar (or handle), fixed jaw, a frame, a moveable jaw and an adjusting nut. Type: Straight Overall length: 10 inches minimum Pipe size: 1/4 to 1 inch minimum size range. Maximum weight: 2 pounds Bending moment: 7000 inch pounds The bar or handle shall be made of cast malleable iron, ductile iron or steel. If the handle is made of steel, it shall be heat treated to 25-40 HRC. The moveable jaw shall be drop forged steel heat treated to 40-49 HRC on the shank; adjacent to the teeth heat treated to 48-60 HRC. The frame or housing shall be forged or cast integral with the bar or handle. The bar or handle shall be provided with a hardened-steel replaceable jaw insert secured by means of a steel pin or rivet. The teeth on the jaw insert shall have a hardness of 48-60 HRC. Case hardened jaws shall not be acceptable. Adjusting nut- Steel, heat treated to 32-48 HRC. Finish-Surface characteristics, protective coatings, and platings shall be in conformance with standard commercial practice. See Technical Specifications paragraph(s): TE.6 End of 5180-00-313-3045 Components List _______________________________________________________________ TECHNICAL SPECIFICATIONS TECHNICAL DOCUMENT T1.1 In accordance with Commercial Item Description A-A-2312A, dated 10/08/02. Applies to item(s): 22 T1.2 In accordance with Commercial Item Description A-A-2318, September 27, 1985. Applies to item(s): 23 T1.3 In accordance with Commercial Item Description A-A-2329, dated September 27,1985. Applies to item(s): 47 T1.4 In Accordance With Commercial Item Description A-A-55822, dated August 1, 1996. Applies to item(s): 16 T1.5 In accordance with American Society for Testing and Materials specification E 18, Standard Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials. Applies to item(s): 5, 6, 7, 8, 9, 10 and 11 T1.6 In accordance with American Society of Mechanical Engineers (ASME) B107.11 as contained in ASME B107.500-2010; this document incorporates and includes the revisions of primary standard B107.11, B107.13, B107.16, B107.18, B107.19, B107.20, B107.22, B107.23, B107.24, B107.25, B107.27 and B107.37.. Applies to item(s): 36 T1.7 In accordance with American Society of Mechanical Engineers (ASME) B107.13 as contained in ASME B107.500-2010; this document incorporates and includes the revisions of primary standard B107.11, B107.13, B107.16, B107.18, B107.19, B107.20, B107.22, B107.23, B107.24, B107.25, B107.27 and B107.37.. Applies to item(s): 37 T1.8 In accordance with American Society of Mechanical Engineers (ASME) B107.15 as contained in ASME B107.600-2008; this document incorporates and includes the revisions of primary standard B107.15, B107.26,B107.30, and B107.31 Applies to item(s): 51, 52 and 53 T1.9 In accordance with American Society of Mechanical Engineers (ASME) B107.20 as contained in ASME B107.500-2010; this document incorporates and includes the revisions of primary standard B107.11, B107.13, B107.16, B107.18, B107.19, B107.20, B107.22, B107.23, B107.24, B107.25, B107.27 and B107.37. Applies to item(s): 40 T1.10 In accordance with American Society of Mechanical Engineers (ASME) B107.23-2004. Applies to item(s): 39 T1.11 In accordance with American Society of Mechanical Engineers (ASME) B107.23 as contained in ASME B107.500-2010; this document incorporates and includes the revisions of primary standard B107.11, B107.13, B107.16, B107.18, B107.19, B107.20, B107.22, B107.23, B107.24, B107.25, B107.27 and B107.37. Applies to item(s): 38 T1.12 In accordance with American Society of Mechanical Engineers (ASME) B107.15 as contained in ASME B107.600-2008; this document incorporates and includes the revisions of primary standard B107.15, B107.26, B107.30, and B107.31 Applies to item(s): 54 and 55 T1.13 In accordance with ASME B107.400-2008, Striking Tools, Incorporating ASME B107.41, ASME B 107.42, ASME B107.53, ASME B107.54, ASME B107.56, ASME B107.57, and ASME B107.58 Applies to item(s): 28 T1.14 In accordance with American Society of Mechanical Engineers (ASME) B107.44 Chisels Glaziers, Wood, Ripping, Flooring/Electricians as contained in ASME B107.410-2008; this document incorporates and includes the revisions of primary standard B107.43, B107.44, B107.46, B107.48, B107.49, B107.50, B107.52 and B107.59 Applies to item(s): 15 T1.15 In accordance with American Society of Mechanical Engineers (ASME) B107.48 as contained in ASME B107.410-2008; this document incorporates and includes the revisions of primary standard B107.43, B107.44, B107.46, B107.48, B107.49, B107.50, B107.52 and B107.59 Applies to item(s): 17 T1.16 In accordance with American Society of Mechanical Engineers (ASME) B107.8 as contained in ASME B107.100-2010; this document incorporates and includes the revisions of primary standard B107.6, B107.8, B107.9, B107.21, B107.39, B107.40, and B107.66. Applies to item(s): 60 and 61 T1.17 In accordance with ASME B18.3-2003, Socket Cap, Shoulder and Set Screws, Hex and Spline Keys. Applies to item(s): 30, 30.1, 30.2, 30.3, 30.4, 30.5, 30.6, 30.7, 30.8, 30.9, 30.10, 30.11, 30.12, 30.13, 30.14, 30.15, 30.16, 30.17, 30.18, 30.19 and 30.20 T1.18 In accordance with American Society of Mechanical Engineers (ASME) B94.52M-1999. Applies to item(s): 12 T1.19 Applies to item(s): 2 T1.20 In accordance with Federal Specification GGG-B-671F, dated 02/11/76. Applies to item(s): 13 T1.21 In accordance with Federal Specification GGG-P-836A, dated 04/05/95. Applies to item(s): 43, 44, 45 and 46 T1.22 In accordance with Federal Specification W-P-796B dated April 24, 1974. Applies to item(s): 42 EXCEPTION(S) TO TECHNICAL DOCUMENT T2.1 EXCEPTION TO COMMERCIAL ITEM DESCRIPTION A-A-55822, dated August 1, 1996. Paragraph 2.3 Painting, delete first sentence and substitute: "The interior and exterior of the chest shall be finished by sealing, and then coating with Green 383 (color # 34094) polyurethane conforming to MIL-C-46168 or MIL-C-53039 to minimum dry film thickness of 1.8 mils. Applies to item(s) : 16 T2.2 Coatings: Shall be in accordance with SAE AS4984-2011; Coating Requirements for Aerospace Hand Tools. Applies to item(s) : 60 and 61 T2.3 Alternative coatings may be used and shall be in accordance with Coating Requirements for Aerospace Hand Tools, SAE AS4984 Issued 1999-05. Applies to item(s) : 39 T2.4 Mark each tool in a permanent and legible manner with drawing number, manufacturer's name or identifying symbol, and country of origin Applies to item(s) : 2 and 48 T2.5 Bi-metal blades can be furnished for the flexible blades. The cutting edge of the bi-metal blade shall be constructed of high speed steel. The back shall be constructed of carbon steel. Applies to item(s) : 12 ITEM MARKING T3.1 Each item Shall Be Marked in a Permanent and Legible Manner with: 1) Manufacturer's Part Number 2) Manufacturer's Name or Identifying Symbol, and 3) Country of Origin Each Package including the unit, single, intermediate, and exterior container must be labeled with the requisition number or Transportation Control Number (TCN). Requisition Number and TCN are found on the Purchase Order. Applies to item(s) : main kit/set PACKAGING T4.1 Preservation/Packing: Each tool kit shall be packed in a close fitting fiberboard box that will offer protection during shipping, handling, storage and redistribution. The packed tool kit shall be marked in accordance with standard commercial practice. Shipping Container: Each kit shall be packed as stated above and the quantity of kits packaged per shipping container shall be uniform. The shipping container shall be packed in a close fitting fiberboard box in compliance with the Uniform Freight Classification and the National Motor Freight Classification requirements of Rules, Item 222, Sec. 3., Minimum 200 or ECT 32. Applies to item(s) : main kit/set MARKING T6.1 All unit, intermediate, transport packages and unit loads shall be marked and bar coded for delivery to the GSA DEPOT and MILITARY ACTIVITIES shall be in accordance with the latest version of MIL-STD-129, "Military Marking For Shipment and Storage". "Latest version" is defined as the version in effect on the date of bid submittal. Federal Standards and Military Standards can be accessed on-line via the Defense Logistics Agency's "Assist" Quicksearch web site: http://assist.daps.dla.mil/quicksearch/ NOTICE: All Pallets transported / Shipped to the GSA Depot MUST be HEAT TREATED and marked IAW IIPC Palletization: The shipping (transport) containers shall be palletized. The pallets shall be 48-inch length x 40-inch width, general purpose, four-way entry, flush stringer, and double-face non-reversible pallets. The palletized load shall not exceed 2500 pounds in weight for shipments to the Eastern Distribution Center (Burlington). The palletized load shall not exceed 2000 pounds in weight for shipments to the Western Distribution Center (French Camp Location). The palletized load shall not overhang the pallet deck board edge by more than 1 inch and shall not exceed 53 inches in overall height (including pallet). Less than half pallet loads or loads shipped by small package carrier in acceptable transport packing need not be palletized. When less than full but more than a half pallet is used, the palletized load shall utilize proper bracing and/or reinforcement to ensure that the load can withstand two additional loads placed on it. Stacking: A load-stacking test shall be performed once, at the beginning of the contract, for each different unitized or palletized load configuration. A fully palletized load shall be tested utilizing a total stack of three palletized loads, with all the proper bracing and/or reinforcement necessary to perform the test. There shall be no evidence of damage to the pallets, shipping containers or products when stack is tested on the rigid surface for a minimum of 24 hours, in compliance with all the National and Local Safety Regulations. The pre-tested palletized load configuration shall be duplicated using the same packaging materials, pattern, number of shipping (transport) containers, and procedures consistent throughout the duration of the contract. Palletized loads shall be stable and safe when handled with mechanical equipment by qualified personnel. Materials: All lumber used inside or outside a shipment shall be bark free. No used wood pallets with repaired components or stringers will be acceptable. All wood pallet stringers shall be manufactured from hardwoods. Pallets manufactured of materials other than wood, shall conform to all the requirements specified herein. Unitization: For the purpose of this requirement, the assembled group of containers or items in a single load that can be handled as a unit throughout the distribution system. Unitization encompasses, but is not limited to, consolidation in a container, placement on a pallet or load base having forklift capability, or securely binding together. Shipments should be considered for unitization where appropriate or specified. Unitization of pallet load: The palletized load shall be unitized and secured to the pallet to insure that the load arrives intact without product damage. The containers or items shall be placed in a suitable pattern to form a stable and balanced load. Vertical, horizontal or filler reinforcement shall be added as necessary to meet the stacking strength requirements. A palletized load shall be secured to the pallet by shrink or stretch wrapping, and/or, by steel or nonmetallic strapping. When steel or nonmetallic strapping is used, edge protectors shall be provided to prevent damage to the cartons when tensioning the strapping. As a minimum, two straps shall run lengthwise, two straps shall run widthwise, and two straps shall run around the girth of the palletized load. A palletized load shall be capable of protecting the products against damage in a multiple handling, transportation, and storage environment having distribution warehouses with rack systems that support the load/s overhead of warehouse personnel. Notice of special requirements for shipment to all countries, GSA Depots and DLA Consolidated Shipping Points that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published Guidelines for Regulating Wood Packaging Material in International Trade. Countries endorsing the IPPC Guidelines are found at the website given below. General Services Administration Acquisition Manual (GSAM) Clause 552.211-89 requires non-manufactured wood pallets and other non-manufactured wood packaging material used to pack items for delivery to or through IPPC countries be marked and properly treated in accordance with IPPC guidelines. Pallets and packing material shipped to FAS distribution facilities designated for possible delivery to the countries endorsing the IPPC Guidelines will comply with DLAD 47.305-1, and MIL-STD-2073-1. http://www.aphis.usda.gov/import_export/plants/plant_exports/wpm/country/index.shtml UNIT PACKAGES: The unit packages shall be packed in a close fitting fiberboard box in compliance with the Uniform Freight Classification and the National Motor Freight Classification requirements of Rules, Item 222, Sec. 3., Minimum 200 psi, or Edge Crush Test (ECT) 32 Lbs. per Inch Width. Applies to item(s) : main kit/set ENVIRONMENTAL FIELDS TE.6. PRIME Packaging for this product is compliant with the U.S. Navy "Plastics Removal in the Marine Environment (PRIME)" program which calls for non-plastic packaging, packing, and associated marking requirements. The definition of plastic shall be in accordance with that given in ASTM D883-00, "Standard Terminology Related to Plastics". Applies to item(s): 1, 12, 17, 18, 19, 21, 22, 23, 26, 29, 30, 30.1, 30.2, 30.3, 30.4, 30.6, 30.8, 30.9, 30.10, 30.11, 30.12, 30.13, 30.14, 30.15, 30.16, 30.17, 30.18, 30.19, 30.20, 36, 37, 38, 40, 43, 44, 45, 46, 47, 49, 51, 52, 54, 55, 60, 61, 62 and 63
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/notices/7ea34ec4ad04d158e74ae6d046412bcc)
 

Record

SN02820357-W 20120801/120731000331-7ea34ec4ad04d158e74ae6d046412bcc (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |