SOURCES SOUGHT
36 -- Fabrication of Lab Scale Bi-component Fiber Melt Extrusion Unit and its Accessory Parts
- Notice Date
- 8/6/2012
- Notice Type
- Sources Sought
- NAICS
- 561990
— All Other Support Services
- Contracting Office
- ACC-APG - Natick (SPS), ATTN: AMSRD-ACC-N, Natick Contracting Division (R and BaseOPS), Building 1, Kansas Street, Natick, MA 01760-5011
- ZIP Code
- 01760-5011
- Solicitation Number
- W911QY6666
- Response Due
- 8/10/2012
- Archive Date
- 10/9/2012
- Point of Contact
- Elizabeth A. Welsh, 508-233-4662
- E-Mail Address
-
ACC-APG - Natick (SPS)
(elizabeth.a.welsh12.civ@mail.mil)
- Small Business Set-Aside
- N/A
- Description
- Fabricate Lab Scale Bi-component Melt Extrusion Base Unit: Complete unit ready to run equipped with the following: two (2) melt extruders, extruder units must have drive mechanisms, variable speed D.C. electric motor driven, extruder barrel pressure rating of 7,500 psi (500 bar), two (2) - single screw extruders, screw size 5/8" diameter - 24:1 l/d (16mm), two (2) - pack pressure gauges, can deliver polymer pressure of 2500 psi (166 bar), temperature capability of up to 3100C with temperature control of < 3.50C, electrically heated, five (5) zones: two (2) per extruder; one (1) for spinneret, pack block - 17-4 ph stainless steel (ss), torque limitation on extruder screw, throughput range: 0.05 to 2.0 lb / hour for each extruder, pressure control of extruder screw speed 5% via KBIC dc motor controller, one (1) complete control package in satellite control box, quantity of unused polymer in each system less than 10 cc. Fabricate Spin Pack set or Spinneret - Supplied with Bi-component Extruder One (1) spin pack set containing support plate and spinneret (corrosion resistant Hastalloy) or one (1) spinneret (corrosion resistant - Hastalloy) having 19 round holes with each having 0.5mm diameter shaped holes, all fasteners, adapters, and components required for installation, operation, and disassembly of the spin pack set or spinneret should be included, all component parts to make the following fiber cross sections: homo-filament, side-by-side, sheath/core, 16 segment pie, 36 islands-in-the-sea, screen sandwich type filters and seals or equivalent for 25 builds. Options & Accessories - The machine needs to run FOY yarn, meltblown webs, spunbond webs, metal core and monofilaments which requires fabrication of all these accessory parts in addition to the optional equipment as listed in the "Bi-component Melt Extruder Document."
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/be32720513f83df4e0517490d34ebc43)
- Place of Performance
- Address: ACC-APG - Natick (SPS) ATTN: AMSRD-ACC-N, Natick Contracting Division (R and BaseOPS), Building 1, Kansas Street Natick MA
- Zip Code: 01760-5011
- Zip Code: 01760-5011
- Record
- SN02827647-W 20120808/120806234619-be32720513f83df4e0517490d34ebc43 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |