PRESOL | 47 | METAL | 11-Aug-12

FBO DAILY ISSUE OF AUGUST 11, 2012 FBO #3913
SOLICITATION NOTICE

47 -- METAL

Notice Date: 8/9/2012
Notice Type: Combined Synopsis/Solicitation
Contracting Office: Fleet Industrial Supply Center, Jacksonville, FL 32212
ZIP Code: 32212
Solicitation Number: N68836-12-T-0343
Response Due: 8/15/2012
Archive Date: 2/11/2013
Point of Contact: Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
E-Mail Address: Clientservices@fedbid.com;
Small Business Set-Aside: Total Small Business
Description: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is N68836-12-T-0343 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-60. The associated North American Industrial Classification System (NAICS) code for this procurement is 331210 with a small business size standard of 1,000.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2012-08-15 13:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be JACKSONVILLE, FL 32212 The FLC - Jacksonville requires the following items, Exact Match Only, to the following: LI 001, ANGLE, 2" X 2" X 3/16 A-36 20 FT (100 pieces that are 20ft long), 100, EA; LI 002, PLATE, 3/16 A-36, 48" X 96",.180 MIN MILL EDGE, 1, SHEET; LI 003, ANGLE, 1" X 1" X 3/16 A-36 20 FT (1 piece that is 20ft long), 1, EA; LI 004, TUBING, 2" SQ X 11 GA WALL 24FT, ASTM A-500 GRADE B (180 pieces that are 24ft long), 180, EA; LI 005, TUBING, 2" SQ X 1/4 WALL 24FT, ASTM A-500 GRADE B (100 pieces that are 24ft long), 100, EA; LI 006, TUBING, 1-1/4" SQ X 11 GA WALL 24FT, ASTM A-513 (140 pieces that are 24ft long), 140, EA; LI 007, ANGLE, 3" X 2" X 3/16 A-36 20 FT (6 pieces that are 20ft long), 6, EA; LI 008, ANGLE, 1-1/2" X 1-1/2" X 3/8 A-36 20 FT (1 piece that is 20ft long), 1, EA; LI 009, PLATE, 5/16 A-36, 48" X 96" CUT TOLERANCE: +1/8 / -0, 1, EA; LI 010, PLATE, 11 GA HR CQ, 48" X 96", A1011 CS B C1008.112 MIN MILL EDGE, 37, EA; LI 011, TUBING, 3" SQ X 7 GA WALL 24FT, ASTM A-500 GRADE B (14 pieces that are 24ft long), 14, EA; LI 012, TUBING, 3" X 2" X 7 GA WALL 24FT, ASTM A-500 GRADE B (4 pieces that are 24ft long), 4, EA; LI 013, PLATE, 1/4 A-36, 48" X 120",.240 MIN MILL EDGE, 7, EA; LI 014, TUBING, 4" X 2" X 11 GA WALL 24FT, ASTM A-500 GRADE B (6 pieces that are 24ft long), 6, EA; LI 015, STRIP, 3/16 X 5" HR CQ, 20FT (10 pieces that are 20ft long), 10, EA; LI 016, FLOOR PLATE, 1/4 X 48" X 96", 12, SHEET; LI 017, TUBING, 1-1/2 SQ X (.083) 14 GA 24FT, ASTM A-513 (2 pieces that are 24ft long) PLEASE NOTE, DO NOT OFFER SMLS, THIS IS NOT SMLS TUBE, 2, EA; LI 018, ROD, 1" RD A-36 HR STEEL 20FT (3 pieces that are 20ft long), 3, EA; LI 019, TUBING, 1-3/4" SQ X 7 GA WALL 24FT, ASTM A-500 GRADE B (2 pieces that are 24ft long), 2, EA; LI 020, TUBING, 1-1/4" SQ X 7 GA WALL 24FT, ASTM A-500 GRADE B (2 pieces that are 24ft long), 2, EA; LI 021, FLAT BAR, 1/2" X 1-1/4" A-36 HR STEEL 20FT (1 piece that is 20ft long), 1, EA; LI 022, PLATE, 16 GA HR CQ 48" X 96", TEMPER FLAT A1011 CS B C1008,.055 MIN MILL EDGE, 1, SHEET; LI 023, CHANNEL, 4" X 5.4# A-36 20FT, 4.00 X 1.584.184 WEB (12 pieces that are 20ft long), 12, EA; LI 024, TUBING, 2" SQ X 7 GA WALL 24FT, ASTM A-500 GRADE B (24 pieces that are 24ft long), 24, EA; LI 025, STRIP, 3/16 X 2" HR CQ, 20FT (2 pieces that are 20ft long), 2, EA; LI 026, FLAT BAR, 1/4 X 2" A-36 HR STEEL 20FT (6 pieces that are 20ft long), 6, EA; LI 027, FLAT BAR, 3/8 X 1" A-36 HR STEEL 20FT (1 piece that is 20ft long), 1, EA; LI 028, PIPE, 1/2 SCH 40 BPE WELDED PIPE, 21FT, ASTM A53 (TESTED),.840 OD X.109 WALL (40 pieces that are 21ft long), 40, EA; LI 029, PIPE, 2 SCH 40 BPE WELDED PIPE, 21FT, ASTM A53 (TESTED), 2.375 OD X.154 WALL (5 pieces that are 21ft long), 5, EA; LI 030, ALUM ANGLE, 2" X 2" X 1/8 6061-T6 (60 pieces that are 25ft long), 60, EA; LI 031, ALUM FLAT BAR, 1/4 X 1" 6061-T6511, 12FT (40 pieces that are 12ft long), 40, EA; LI 032, ALUM PLATE, 48" X 96".190 6061-T6, 10, SHEET; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, FLC - Jacksonville intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. FLC - Jacksonville is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. This announcement constitutes the only solicitation; a formal, written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This solicitation documents and incorporates provisions and clauses in effect through FAC 2005-52 and DFARS Change Notice 20110331. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses: www.acqnet.gov/far and http://www.acq.osd.mil/dpap/dfars/index.htm The NAICS code is 331210 and the Small Business Standard is 1000. Sector 42 ? Wholesale Trade (These NAICS codes shall not be used to classify Government acquisitions for supplies. They also shall not be used by Federal government contractors when subcontracting for the acquisition for supplies. The applicable manufacturing NAICS code shall be used to classify acquisitions for supplies. A Wholesale Trade or Retail Trade business concern submitting an offer or a quote on a supply acquisition is categorized as a nonmanufacturer and deemed small if it has 500 or fewer employees and meets the requirements of 13 CFR 121.406.) FAR 52.247-34, F.o.b. Destination applies 52.212-2 Evaluation - Commercial Items. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. No partial shipments are permitted unless specifically authorized at the time of award. Bid MUST be good for 30 calendar days after close of Buy. FAR 52.212-3 Offeror Reps and Certs / FAR 52.212-3 Alt1 Offeror Reps and Certs. EFFECTIVE JAN 2005, all offerors are required to use ?Online Representations and Certifications Application (ORCA) to respond to federal solicitations. To register in ORCA, please go to www.bpn.gov/orca. You must be active in the Central Contractor Registration (www.ccr.gov) and have a Marketing Partner Identification Number (MPIN), to register in ORCA. Failure to register in ORCA may preclude an award being made to your company. Central Contractor Registration (CCR). Sellers must be registered in the CCR database to be considered for award. Registration is free and can be completed on-line at http://www.ccr.gov/ The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/Far/ 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders?Commercial Items. 52.219-6 Notice of Total Small Business Set-Aside. 52.222-3 Convict Labor 52.222-19 Child Labor--Cooperation with Authorities and Remedies 52.222-21 Prohibition of Segregated Facilities 52.222-26 Equal Opportunity 52.222-35 Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans 52.222-36 Affirmative Action for Workers w/ Disabilities 52.222-37 Employment Reports on Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans. 52.223-18 Contractor Policy to Ban Text Messaging while Driving (SEPT 2010) 52.225-13 Restrictions on Certain Foreign Purchases. 252.212-7001 Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items. (MAR 2011) 252.225-7001 Buy American Act and Balance of Payments Program. 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. Offeror must be registered in the Central Contractor Registration (CCR) database before an award can be made to them. If the offeror is not registered in the CCR, it may do so through the CCR website at http://www.ccr.gov. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. DFARS Compliant Material All material shall be procured from domestic or qualifying country sources. A copy of certification identifying the source of material shall be provided at the time of receipt of material.
Web Link: FBO.gov Permalink
(https://www.fbo.gov/notices/30c5105e33d68722f74421c757e09d28)
Place of Performance: Address: JACKSONVILLE, FL 32212; Zip Code: 32212-0016
Record: SN02834001-W 20120811/120810002042-30c5105e33d68722f74421c757e09d28 (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

47 -- METAL