SOURCES SOUGHT
71 -- Stainless Steel Detention Rm Table, Chairs, Desks - Table-Desk-Chair-Stand Sketches
- Notice Date
- 8/23/2012
- Notice Type
- Sources Sought
- NAICS
- 337124
— Metal Household Furniture Manufacturing
- Contracting Office
- General Services Administration, Public Buildings Service (PBS), Property Management Service Center - Michigan Service Center (5PSSC1A), General Services Administration, Public Buildings Service, 6 Parklane Blvd, Suite 451, Dearborn, Michigan, 48126, United States
- ZIP Code
- 48126
- Solicitation Number
- 5PSSC1A-12-0566
- Point of Contact
- Jerrud W. Parker, Phone: 313 317-9618
- E-Mail Address
-
jerrud.parker@gsa.gov
(jerrud.parker@gsa.gov)
- Small Business Set-Aside
- Total Small Business
- Description
- Sketches of the items to be provided SPECIFICATIONS A. Contractor to remove existing table (unbolt from floor) and store for re-use (onsite), per tenant direction. B. Contractor to relocate (2) full height cabinets, and store for re-use (onsite), per tenant direction. C. Furnish and install (2) agent desks, per attached sketch. Secure to floor with tamper proof hardware. D. Furnish and install (3) arm chairs, per attached sketch. Secure to floor with tamper proof hardware. E. Furnish and install (2) keyboard trays - one each per each agent desk. F. Furnish and deliver (1) printer stand, per attached sketch. G. Furnish and install (1) interview desk, per attached sketch. Secure to floor with tamper proof hardware. H. All furniture items to be constructed of stainless steel, adequate thickness and gauge for use in an elevated abuse arena; i.e. ‘correctional grade'. Provide suitable bracketing, reinforcing, etc. to prevent flexing or racking of items. I. Products must be installed in alignment, free from warp, twist or distortion, plumb, level and true. Comply with approved shop drawings, manufacturer's instructions and recommendations for handling and installation. Defective products shall not be installed. J. Perform cutting, drilling and fitting required for installation of equipment. Field modification of furniture should be kept to an absolute minimum. K. Provide penetrations for installation or other work in detention equipment; comply with templates or detail drawings furnished by other trades. Penetrations cut in the field must be marked by the trade requiring the penetration and cut by the furniture contractor. L. Comply with AWS Code for procedures of manual shielded metal-arc welding. Weld per product manufactures recommendations. Where surfaces are to be exposed to view, grind and sand welds smooth; finish holes, defects, other imperfections so surfaces will be smooth if/when painted. M. Field welding or other field attachment of metal assemblies to embedded anchorages shall be accomplished by furniture contractor. Where adjustable anchors are required, furnish anchors to frame installers for setting. Concrete unit masonry provider shall grout frames set into concrete block, including intermediate mullions or tubular elements, if necessary. N. Adjust and lubricate moving parts to operate smoothly and quietly, without binding. O. Furniture shall be free from scratches, dents, permanent discolorations and other defects. Remove and replace damaged parts. P. All final cleaning shall be the responsibility of the furniture contractor
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/GSA/PBS/5PT3/5PSSC1A-12-0566/listing.html)
- Place of Performance
- Address: Metro Airport, Romulus, Michigan, 48242, United States
- Zip Code: 48242
- Zip Code: 48242
- Record
- SN02852989-W 20120825/120824001158-b25d3a9530b5564a56e7f0d8526a0e70 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |