PRESOL | 99 | FAUX WEAPON | 26-Aug-12

FBO DAILY ISSUE OF AUGUST 26, 2012 FBO #3928
SOLICITATION NOTICE

99 -- FAUX WEAPON

Notice Date: 8/24/2012
Notice Type: Combined Synopsis/Solicitation
NAICS: 339999 — All Other Miscellaneous Manufacturing
Contracting Office: Other Defense Agencies, U.S. Special Operations Command, Naval Special Warfare Development Group, 1636 Regulus Avenue, Building 313, Virginia Beach, Virginia, 23461-2299
ZIP Code: 23461-2299
Solicitation Number: H92244-12-T-0308
Archive Date: 9/22/2012
Point of Contact: Danyiele F. Peterson, Phone: 7578932713
E-Mail Address: danyiele.peterson@vb.socom.mil
(danyiele.peterson@vb.socom.mil)
Small Business Set-Aside: Total Small Business
Description: This is a combined synopsis/solicitation for Commercial Items in accordance with the format prescribed in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are requested and a written solicitation will not be issued. The solicitation is being issued as a Request for Quote (RFQ); solicitation number is H92244-12-T-0308, and a firm fixed price contract is contemplated. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-60 effective 26 July 2012. This procurement is 100% small business set aside and the associated North American Industrial Classification Code (NAICS) code is 339999 with a business size standard of 500 employees.The DPAS rating for this procurement is DO-C9. All responsible sources may submit a quote which shall be considered by the agency. The Naval Special Warfare Development Group (NSWDG) has a requirement to procure the following: Section B - Schedule of Supplies and Services CLIN 0001, Description: Simulated AK47 with the ammunition magazine; Qty: 15, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide fifteen (15) simulated AK-47s with the ammunition magazine. The weapons shall be fabricated from an impact resistant based material and painted with ultra-violet resistant paint to provide a realistic used appearance. The weapons shall contain a steel sub-straight to provide rigidity. The weapon shall have dimensions and weight that are within two percent (2%) of an actual AK-47 with a full magazine. CLIN 0002, Description: Simulated AK47 without the ammunition magazine; Qty: 30, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide thirty (30) simulated AK-47s without the ammunition magazine. The weapons shall be fabricated from an impact resistant based material and painted with ultra-violet resistant paint to provide a realistic used appearance. The weapon shall contain a steel sub-straight to provide rigidity. The weapon shall have dimensions and weight that are within two percent (2%) of an actual AK-47 without the ammunition magazine. CLIN 0003, Description: Simulated AK47 with the ammunition magazine and folding stock; Qty: 10, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide ten (10) simulated AK-47s with the ammunition magazine and folding stock. The weapons shall be fabricated from an impact resistant based material and painted with ultra-violet resistant paint to provide a realistic used appearance. The weapon shall contain a steel sub-straight to provide rigidity. The weapon shall have dimensions and weight that are within two percent (2%) of an actual AK-47 with the ammunition magazine and folding stock. CLIN 0004, Description: Simulated AK47 assault rifles banana clips; Qty: 30, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide thirty (30) simulated AK-47 assault rifles banana clips. The clip shall be fabricated from an impact resistant based material and painted with ultra-violet resistant paint to provide a realistic used appearance. The clips shall contain a steel sub-straight to provide rigidity. The clips shall have dimensions and weight that are within two percent (2%) of an actual AK47 ammunition magazine. CLIN 0005, Description: Simulated Crates; Qty: 3, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide six (3) simulated crates to house ten (10) or more AK47 assault rifles in each. The crates shall be fabricated from wood, painted green, have rope handles and authentic looking white foreign lettering. The lid shall be hinged. CLIN 0006, Description: Simulated AKS-74U Assault Rifles with folded stock; Qty: 5, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide five (5) simulated AKS-74u Rifles with folded stock. The weapons shall be fabricated from an impact resistant based material and painted with ultra-violet resistant paint to provide a realistic used appearance. The weapon shall contain a steel sub-straight to provide rigidity. The weapon shall have dimensions and weight that are within two percent (2%) of an actual AK-74 Assault Rifles and ammunition magazine. CLIN 0007, Description: Simulated AK-74 Assault Rifles with unfolded stock; Qty: 15, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide fifteen (15) simulated AKS-74u Rifles with unfolded stock. The weapons shall be fabricated from an impact resistant based material and painted with ultra-violet resistant paint to provide a realistic used appearance. The weapon shall contain a steel sub-straight to provide rigidity. The weapon shall have dimensions and weight that are within two percent (2%) of an actual AK-74 Assault Rifles and ammunition magazine. CLIN 0008, Description: Simulated Colt Revolver (Short Barrel); Qty: 5, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide five (5) simulated Colt Revolver (Short Barrel). The weapons shall be fabricated from an impact resistant based material and painted with ultra-violet resistant paint to provide a realistic used appearance. The weapon shall contain a steel sub-straight to provide rigidity. The weapon shall have dimensions and weight that are within two percent (2%) of an actual Colt revolver. CLIN 0009, Description: Simulated Makarov Pistols; Qty: 6, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide six (6) simulated Makarov Pistols. The weapons shall be fabricated from an impact resistant based material and painted with ultra-violet resistant paint to provide a realistic used appearance. The weapon shall contain a steel sub-straight to provide rigidity. The weapon shall have dimensions and weight that are within two percent (2%) of an actual Makarov Pistols. CLIN 0010, Description: Simulated Star Semi Auto Pistols; Qty: 6, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide six (6) simulated Star Semi Auto Pistols. The weapons shall be fabricated from an impact resistant based material and painted with ultra-violet resistant paint to provide a realistic used appearance. The weapon shall contain a steel sub-straight to provide rigidity. The weapon shall have dimensions and weight that are within two percent (2%) of an actual Star Semi Auto Pistols. CLIN 0011, Description: Simulated Rocket Propelled Grenade Launchers (RPG) without grenade; Qty: 60, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide sixty (60) simulated rocket propelled grenade launchers (RPG) without grenade. The weapons shall be fabricated from an impact resistant based material and painted with ultra-violet resistant paint to provide a realistic used appearance. The weapon shall contain a steel sub-straight to provide rigidity. The weapon shall have dimensions and weight that are within two percent (2%) of an actual RPG without grenade. CLIN 0012, Description: Simulated RPG Crates; Qty: 4, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide four (4) simulated RPG crates containing four (4) simulated/removable RPG grenades in each crate. The crates shall be fabricated from wood, painted green, have rope handles and authentic looking white foreign lettering. The lid shall be hinged and have a latching mechanism. The grenades shall be fabricated from an impact resistant based material and painted with ultra-violet resistant paint to provide a realistic used appearance. The grenade shall contain a steel sub-straight to provide rigidity. The grenade shall have dimensions and weight that are within two percent (2%) of an actual RPG grenade. CLIN 0013, Description: Simulated/Removable Hand Grenade Crates; Qty: 3, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide three (3) crates containing sixteen (16) simulated/removable hand grenades. The grenades shall be fabricated from an impact resistant material and painted with ultra-violet resistant paint to provide a realistic used appearance. The grenades shall have dimensions and weight that are within two percent (2%) of an actual grenade. The crates shall be fabricated from wood, painted green, have rope handles, and authentic looking white foreign lettering. The lid shall be hinged and have a latching mechanism. CLIN 0014, Description: Simulated Loose Chinese Fragmentation Grenades; Qty: 10, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide ten (10) simulated loose Chinese fragmentation grenades. The grenades shall be fabricated from an impact resistant material and painted with ultra-violet resistant paint to provide a realistic used appearance. The grenades shall have dimensions and weight that are within two percent (2%) of an actual Chinese fragmentation grenade. CLIN 0015, Description: Simulated Medium-sized (81 mm or larger) Mortars Projectiles; Qty: 10, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide ten (10) simulated medium sized (81 mm or larger) mortars projectiles. The mortars shall be fabricated from an impact resistant based material and painted with ultra-violet resistant paint to provide a realistic used appearance. The weapon shall contain a steel sub-straight to provide rigidity. The mortars shall have dimensions and weight that are within two percent (2%) of an actual mortar. CLIN 0016, Description: Simulated Small (60 mm) Mortars Projectiles; Qty: 10, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide ten (10) simulated small (60 mm) mortars projectiles. The mortars shall be fabricated from an impact resistant based material and painted with ultra-violet resistant paint to provide a realistic used appearance. The weapon shall contain a steel sub-straight to provide rigidity. The mortars shall have dimensions and weight that are within two percent (2%) of an actual mortar. CLIN 0017, Description: Simulated Medium-sized Mortar launching tubes with base plate; Qty: 3, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide three (3) simulated medium sized mortar launching tubes with base plate. The tubes shall be fabricated from a blend of ABS plastic and polyurethane resin and painted with a ultra-violet resistant paint to provide a realistic used appearance. They shall have dimensions and weight that are within two percent (2%) of an actual mortar launching tubes/base plates. CLIN 0018, Description: Simulated FN FAL Assault Rifle with the ammunition magazine; Qty: 5, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide five (5) simulated FN FAL Assault Rifle with the ammunition magazine. The weapons shall be fabricated from an impact resistant based material and painted with ultra-violet resistant paint to provide a realistic used appearance. The weapon shall contain a steel sub-straight to provide rigidity. The weapon shall have dimensions and weight that are within two percent (2%) of an actual FN FAL Assault Rifle with a full magazine. CLIN 0019, Description: Simulated G3 Assault Rifle with the ammunition magazine; Qty: 10, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide ten (10) simulated G3 Assault Rifle with the ammunition magazine. The weapons shall be fabricated from an impact resistant based material and painted with ultra-violet resistant paint to provide a realistic used appearance. The weapon shall contain a steel sub-straight to provide rigidity. The weapon shall have dimensions and weight that are within two percent (2%) of an actual G3 Assault Rifle with a full magazine. CLIN 0020, Description: Simulated Infield Mk. 1 Assault Rifle with the ammunition magazine; Qty: 15, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide fifteen (15) simulated Infield Mk. 1 Assault Rifle with the ammunition magazine. The weapons shall be fabricated from an impact resistant based material and painted with ultra-violet resistant paint to provide a realistic used appearance. The weapon shall contain a steel sub-straight to provide rigidity. The weapon shall have dimensions and weight that are within two percent (2%) of an actual Infield Mk. 1 Assault Rifle with a full magazine. CLIN 0021, Description: Simulated SKS Assault Rifle with the ammunition magazine; Qty: 15, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide fifteen (15) simulated SKS Assault Rifle with the ammunition magazine. The weapons shall be fabricated from an impact resistant based material and painted with ultra-violet resistant paint to provide a realistic used appearance. The weapon shall contain a steel sub-straight to provide rigidity. The weapon shall have dimensions and weight that are within two percent (2%) of an actual Infield Mk. 1 Assault Rifle with a full magazine. CLIN 0022, Description: Simulated SVD Dragunov Sniper Rifles with the ammunition magazine; Qty: 10, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide ten (10) simulated SVD Dragunov Sniper Rifles with the ammunition magazine. The weapons shall be fabricated from an impact resistant based material and painted with ultra-violet resistant paint to provide a realistic used appearance. The weapon shall contain a steel sub-straight to provide rigidity. The weapon shall have dimensions and weight that are within two percent (2%) of an actual SVD Dragunov Sniper Rifles with a full magazine. CLIN 0023, Description: Simulated Moisin-Nagant Rifles with the ammunition magazine; Qty: 10, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide ten (10) simulated Moisin-Nagant Rifles with the ammunition magazine. The weapons shall be fabricated from an impact resistant based material and painted with ultra-violet resistant paint to provide a realistic used appearance. The weapon shall contain a steel sub-straight to provide rigidity. The weapon shall have dimensions and weight that are within two percent (2%) of an actual Moisin-Nagant Rifles with a full magazine. CLIN 0024, Description: Simulated PKM Machine Guns; Qty: 10, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide ten (10) simulated PKM Machine Guns. The weapons shall be fabricated from an impact resistant based material and painted with ultra-violet resistant paint to provide a realistic used appearance. The weapon shall contain a steel sub-straight to provide rigidity. The weapon shall have dimensions and weight that are within two percent (2%) of an actual PKM Machine Guns. CLIN 0025, Description: Simulated PKM ammo cans; Qty: 4, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide four (4) simulated PKM ammo cans. The can shall be fabricated from an impact resistant based material and painted with ultra-violet resistant paint to provide a realistic used appearance. The cans shall have dimensions and weight that are within two percent (2%) of an actual PKM ammo cans. CLIN 0026, Description: Simulated RPD Machine Guns; Qty: 10, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide ten (10) simulated RPD Machine Guns. The weapons shall be fabricated from an impact resistant based material and painted with ultra-violet resistant paint to provide a realistic used appearance. The weapon shall contain a steel sub-straight to provide rigidity. The weapon shall have dimensions and weight that are within two percent (2%) of an actual PKM Machine Guns. CLIN 0027, Description: Simulated PKM ammo drums; Qty: 4, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide four (4) simulated PKM ammo drums. The can shall be fabricated from an impact resistant based material and painted with ultra-violet resistant paint to provide a realistic used appearance. The cans shall have dimensions and weight that are within two percent (2%) of an actual PKM ammo drums. CLIN 0028, Description: Simulated 155mm Artillery Shells; Qty: 5, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide five (5) simulated 155mm Artillery Shells. The shells shall be fabricated from an impact resistant based material and painted with ultra-violet resistant paint to provide a realistic used appearance. The weapon shall contain a steel sub-straight to provide rigidity. The shells shall have dimensions and weight that are within two percent (2%) of an actual 155mm Artillery Shells. CLIN 0029, Description: Gun Racks; Qty: 5, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide five (5) gun racks able to hold five (5) rifles on each. The racks shall be fabricated from metal and will appear aged and weather beaten. The racks shall be fabricated to be durable and painted with ultra-violet resistant paint to provide a realistic used appearance. CLIN 0030, Description: Police Gun Racks (minus doors); Qty: 1, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide one (1) police gun racks (minus doors) able to hold a minimum of twenty (20) rifles. The racks shall be fabricated from wood and will appear aged and weather beaten. The rack shall be fabricated to be durable and painted with ultra-violet resistant paint to provide a realistic used appearance. CLIN 0031, Description: Equipment Load Out Table Qty: 1, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide one (1) equipment load out table. The table shall be fabricated from wood and will appear aged and weather beaten. The table shall be fabricated to be durable and painted with ultra-violet resistant paint to provide a realistic used appearance. CLIN 0032, Description: Simulated Ammo Cans Qty: 12, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide twelve (12) simulated ammo cans. The can shall be fabricated from an impact resistant based material and painted with ultra-violet resistant paint to provide a realistic used appearance. The cans shall have dimensions and weight that are within two percent (2%) of an actual PKM ammo cans. CLIN 0033, Description: Small Caliber Center-fired Ammo Boxes Qty: 200, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide two-hundred (200) small caliber center-fired ammo boxes (9mm, 45 ACP, 7.62x39, etc.) from a variety of commercial and military suppliers. Variety is required so no more the ten (10) boxes can be identical (same caliber/manufacturer) and must have a realistic appearance. The boxes shall have dimensions and weight that are within two percent (2%) of actual ammo boxes. CLIN 0034, Description: Shelving Racks Qty: 6, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide six (6) shelving racks able to hold a minimum of twenty (20) rifles. The racks shall be fabricated from wood and/or metal and will appear aged and weather beaten. The racks shall be fabricated to be durable and painted with ultra-violet resistant paint to provide a realistic used appearance. OPTIONAL CLINS OPTION CLIN 1001, Description: Simulated AK47 with the ammunition magazine; Qty: 15, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide fifteen (15) simulated AK-47s with the ammunition magazine. The weapons shall be fabricated from an impact resistant based material and painted with ultra-violet resistant paint to provide a realistic used appearance. The weapons shall contain a steel sub-straight to provide rigidity. The weapon shall have dimensions and weight that are within two percent (2%) of an actual AK-47 with a full magazine. OPTION CLIN 1002, Description: Simulated AK47 without the ammunition magazine; Qty: 30, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide thirty (30) simulated AK-47s without the ammunition magazine. The weapons shall be fabricated from an impact resistant based material and painted with ultra-violet resistant paint to provide a realistic used appearance. The weapon shall contain a steel sub-straight to provide rigidity. The weapon shall have dimensions and weight that are within two percent (2%) of an actual AK-47 without the ammunition magazine. OPTION CLIN 1003, Description: Simulated AK47 with the ammunition magazine and folding stock; Qty: 10, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide ten (10) simulated AK-47s with the ammunition magazine and folding stock. The weapons shall be fabricated from an impact resistant based material and painted with ultra-violet resistant paint to provide a realistic used appearance. The weapon shall contain a steel sub-straight to provide rigidity. The weapon shall have dimensions and weight that are within two percent (2%) of an actual AK-47 with the ammunition magazine and folding stock. OPTION CLIN 1004, Description: Simulated AK47 assault rifles banana clips; Qty: 30, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide thirty (30) simulated AK-47 assault rifles banana clips. The clip shall be fabricated from an impact resistant based material and painted with ultra-violet resistant paint to provide a realistic used appearance. The clips shall contain a steel sub-straight to provide rigidity. The clips shall have dimensions and weight that are within two percent (2%) of an actual AK47 ammunition magazine. OPTION CLIN 1005, Description: Simulated Crates; Qty: 3, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide three (3) simulated crates to house ten (10) or more AK47 assault rifles in each. The crates shall be fabricated from wood, painted green, have rope handles and authentic looking white foreign lettering. The lid shall be hinged. OPTION CLIN 1006, Description: Simulated AKS-74U Assault Rifles with folded stock; Qty: 5, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide five (5) simulated AKS-74u Rifles with folded stock. The weapons shall be fabricated from an impact resistant based material and painted with ultra-violet resistant paint to provide a realistic used appearance. The weapon shall contain a steel sub-straight to provide rigidity. The weapon shall have dimensions and weight that are within two percent (2%) of an actual AK-74 Assault Rifles and ammunition magazine. OPTION CLIN 1007, Description: Simulated AK-74 Assault Rifles with unfolded stock; Qty: 15, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide fifteen (15) simulated AKS-74u Rifles with unfolded stock. The weapons shall be fabricated from an impact resistant based material and painted with ultra-violet resistant paint to provide a realistic used appearance. The weapon shall contain a steel sub-straight to provide rigidity. The weapon shall have dimensions and weight that are within two percent (2%) of an actual AK-74 Assault Rifles and ammunition magazine. OPTION CLIN 1009, Description: Simulated Makarov Pistols; Qty: 6, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide six (6) simulated Makarov Pistols. The weapons shall be fabricated from an impact resistant based material and painted with ultra-violet resistant paint to provide a realistic used appearance. The weapon shall contain a steel sub-straight to provide rigidity. The weapon shall have dimensions and weight that are within two percent (2%) of an actual Makarov Pistols. OPTION CLIN 1010, Description: Simulated Star Semi Auto Pistols; Qty: 6, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide six (6) simulated Star Semi Auto Pistols. The weapons shall be fabricated from an impact resistant based material and painted with ultra-violet resistant paint to provide a realistic used appearance. The weapon shall contain a steel sub-straight to provide rigidity. The weapon shall have dimensions and weight that are within two percent (2%) of an actual Star Semi Auto Pistols. OPTION CLIN 1011, Description: Simulated Rocket Propelled Grenade Launchers (RPG) without grenade; Qty: 60, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide sixty (60) simulated rocket propelled grenade launchers (RPG) without grenade. The weapons shall be fabricated from an impact resistant based material and painted with ultra-violet resistant paint to provide a realistic used appearance. The weapon shall contain a steel sub-straight to provide rigidity. The weapon shall have dimensions and weight that are within two percent (2%) of an actual RPG without grenade. OPTION CLIN 1012, Description: Simulated RPG Crates; Qty: 4, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide four (4) simulated RPG crates containing four (4) simulated/removable RPG grenades in each crate. The crates shall be fabricated from wood, painted green, have rope handles and authentic looking white foreign lettering. The lid shall be hinged and have a latching mechanism. The grenades shall be fabricated from an impact resistant based material and painted with ultra-violet resistant paint to provide a realistic used appearance. The grenade shall contain a steel sub-straight to provide rigidity. The grenade shall have dimensions and weight that are within two percent (2%) of an actual RPG grenade. OPTION CLIN 1013, Description: Simulated/Removable Hand Grenade Crates; Qty: 3, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide three (3) crates containing sixteen (16) simulated/removable hand grenades. The grenades shall be fabricated from an impact resistant material and painted with ultra-violet resistant paint to provide a realistic used appearance. The grenades shall have dimensions and weight that are within two percent (2%) of an actual grenade. The crates shall be fabricated from wood, painted green, have rope handles, and authentic looking white foreign lettering. The lid shall be hinged and have a latching mechanism. OPTION CLIN 1014, Description: Simulated Loose Chinese Fragmentation Grenades; Qty: 10, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide ten (10) simulated loose Chinese fragmentation grenades. The grenades shall be fabricated from an impact resistant material and painted with ultra-violet resistant paint to provide a realistic used appearance. The grenades shall have dimensions and weight that are within two percent (2%) of an actual Chinese fragmentation grenade. OPTION CLIN 1015, Description: Simulated Medium-sized (81 mm or larger) Mortars Projectiles; Qty: 10, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide ten (10) simulated medium sized (81 mm or larger) mortars projectiles. The mortars shall be fabricated from an impact resistant based material and painted with ultra-violet resistant paint to provide a realistic used appearance. The weapon shall contain a steel sub-straight to provide rigidity. The mortars shall have dimensions and weight that are within two percent (2%) of an actual mortar. OPTION CLIN 1016, Description: Simulated Small (60 mm) Mortars Projectiles; Qty: 10, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide ten (10) simulated small (60 mm) mortars projectiles. The mortars shall be fabricated from an impact resistant based material and painted with ultra-violet resistant paint to provide a realistic used appearance. The weapon shall contain a steel sub-straight to provide rigidity. The mortars shall have dimensions and weight that are within two percent (2%) of an actual mortar. OPTION CLIN 1017, Description: Simulated Medium-sized Mortar launching tubes with base plate; Qty: 3, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide three (3) simulated medium sized mortar launching tubes with base plate. The tubes shall be fabricated from a blend of ABS plastic and polyurethane resin and painted with a ultra-violet resistant paint to provide a realistic used appearance. They shall have dimensions and weight that are within two percent (2%) of an actual mortar launching tubes/base plates. OPTION CLIN 1018, Description: Simulated FN FAL Assault Rifle with the ammunition magazine; Qty: 5, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide five (5) simulated FN FAL Assault Rifle with the ammunition magazine. The weapons shall be fabricated from an impact resistant based material and painted with ultra-violet resistant paint to provide a realistic used appearance. The weapon shall contain a steel sub-straight to provide rigidity. The weapon shall have dimensions and weight that are within two percent (2%) of an actual FN FAL Assault Rifle with a full magazine. OPTION CLIN 1019, Description: Simulated G3 Assault Rifle with the ammunition magazine; Qty: 10, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide ten (10) simulated G3 Assault Rifle with the ammunition magazine. The weapons shall be fabricated from an impact resistant based material and painted with ultra-violet resistant paint to provide a realistic used appearance. The weapon shall contain a steel sub-straight to provide rigidity. The weapon shall have dimensions and weight that are within two percent (2%) of an actual G3 Assault Rifle with a full magazine. OPTION CLIN 1020, Description: Simulated Infield Mk. 1 Assault Rifle with the ammunition magazine; Qty: 15, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide fifteen (15) simulated Infield Mk. 1 Assault Rifle with the ammunition magazine. The weapons shall be fabricated from an impact resistant based material and painted with ultra-violet resistant paint to provide a realistic used appearance. The weapon shall contain a steel sub-straight to provide rigidity. The weapon shall have dimensions and weight that are within two percent (2%) of an actual Infield Mk. 1 Assault Rifle with a full magazine. OPTION CLIN 1021, Description: Simulated SKS Assault Rifle with the ammunition magazine; Qty: 15, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide fifteen (15) simulated SKS Assault Rifle with the ammunition magazine. The weapons shall be fabricated from an impact resistant based material and painted with ultra-violet resistant paint to provide a realistic used appearance. The weapon shall contain a steel sub-straight to provide rigidity. The weapon shall have dimensions and weight that are within two percent (2%) of an actual Infield Mk. 1 Assault Rifle with a full magazine. OPTION CLIN 1022, Description: Simulated SVD Dragunov Sniper Rifles with the ammunition magazine; Qty: 10, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide ten (10) simulated SVD Dragunov Sniper Rifles with the ammunition magazine. The weapons shall be fabricated from an impact resistant based material and painted with ultra-violet resistant paint to provide a realistic used appearance. The weapon shall contain a steel sub-straight to provide rigidity. The weapon shall have dimensions and weight that are within two percent (2%) of an actual SVD Dragunov Sniper Rifles with a full magazine. OPTION CLIN 1023, Description: Simulated Moisin-Nagant Rifles with the ammunition magazine; Qty: 10, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide ten (10) simulated Moisin-Nagant Rifles with the ammunition magazine. The weapons shall be fabricated from an impact resistant based material and painted with ultra-violet resistant paint to provide a realistic used appearance. The weapon shall contain a steel sub-straight to provide rigidity. The weapon shall have dimensions and weight that are within two percent (2%) of an actual Moisin-Nagant Rifles with a full magazine. OPTION CLIN 1024, Description: Simulated PKM Machine Guns; Qty: 10, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide ten (10) simulated PKM Machine Guns. The weapons shall be fabricated from an impact resistant based material and painted with ultra-violet resistant paint to provide a realistic used appearance. The weapon shall contain a steel sub-straight to provide rigidity. The weapon shall have dimensions and weight that are within two percent (2%) of an actual PKM Machine Guns. OPTION CLIN 1025, Description: Simulated PKM ammo cans; Qty: 4, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide four (4) simulated PKM ammo cans. The can shall be fabricated from an impact resistant based material and painted with ultra-violet resistant paint to provide a realistic used appearance. The cans shall have dimensions and weight that are within two percent (2%) of an actual PKM ammo cans. OPTION CLIN 1026, Description: Simulated RPD Machine Guns; Qty: 10, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide ten (10) simulated RPD Machine Guns. The weapons shall be fabricated from an impact resistant based material and painted with ultra-violet resistant paint to provide a realistic used appearance. The weapon shall contain a steel sub-straight to provide rigidity. The weapon shall have dimensions and weight that are within two percent (2%) of an actual PKM Machine Guns. OPTION CLIN 1027, Description: Simulated PKM ammo drums; Qty: 4, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide four (4) simulated PKM ammo drums. The can shall be fabricated from an impact resistant based material and painted with ultra-violet resistant paint to provide a realistic used appearance. The cans shall have dimensions and weight that are within two percent (2%) of an actual PKM ammo drums. OPTION CLIN 1028, Description: Simulated 155mm Artillery Shells; Qty: 6, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide six (6) simulated 155mm Artillery Shells. The shells shall be fabricated from an impact resistant based material and painted with ultra-violet resistant paint to provide a realistic used appearance. The weapon shall contain a steel sub-straight to provide rigidity. The shells shall have dimensions and weight that are within two percent (2%) of an actual 155mm Artillery Shells. OPTION CLIN 1029, Description: Gun Racks; Qty: 6, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide six (6) gun racks able to hold five (5) rifles on each. The racks shall be fabricated from metal and will appear aged and weather beaten. The racks shall be fabricated to be durable and painted with ultra-violet resistant paint to provide a realistic used appearance. OPTION CLIN 1032, Description: Simulated Ammo Cans Qty: 12, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide twelve (12) simulated ammo cans. The can shall be fabricated from an impact resistant based material and painted with ultra-violet resistant paint to provide a realistic used appearance. The cans shall have dimensions and weight that are within two percent (2%) of an actual PKM ammo cans. OPTION CLIN 0033, Description: Small Caliber Center-fired Ammo Boxes Qty: 50, Unit of Issue: Each; Extended Description/Specifications: Contractor shall provide fifty (50) small caliber center-fired ammo boxes (9mm, 45 ACP, 7.62x39, etc.) from a variety of commercial and military suppliers. Variety is required so no more the ten (10) boxes can be identical (same caliber/manufacturer) and must have a realistic appearance. The boxes shall have dimensions and weight that are within two percent (2%) of actual ammo boxes. Delivery date: 120 DAYS ARO or sooner Deliver to Virginia Beach, Virginia. Exact delivery location will be specified in contract award. FOB: Destination CLAUSES INCORPORATED BY REFERENCE: FAR 52.202-1 Definitions Jan 2012 FAR 52.203-3 Gratuities Apr 1984 FAR 52.203-6 Restrictions on Subcontractor Sales to the Government (Sep 2006) Alternate I (Oct 1995) Sep 2006 FAR 52-203-10 Price or Fee Adjustment For Illegal Or Improper Activity Jan 1997 FAR 52.204-7 Central Contractor Registration Feb 2012 FAR 52.211-14 Notice of Priority Rating for National Defense Use Apr 2008 FAR 52.211-15 Defense Priority and Allocation Requirements Nov 2011 FAR 52.212-1 Instructions to Offerors - Commercial Items Feb 2012 FAR 52.212-3 Offeror Representations and Certifications Commercial Items Apr 2012 FAR 52.212-4 Contract Terms and Conditions-Commercial Items Feb 2012 FAR 52.212-5 DEV Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items (Deviation) Mar 2012 FAR 52.222-3 Convict Labor Jun 2003 FAR 52.222-19 Child Labor Law - Cooperation with Authorities and Remedies Mar 2012 FAR 52.222-21 Prohibition Of Segregated Facilities Feb 1999 FAR 52.222-26 Equal Opportunity Mar 2007 FAR 52.222-50 Combating Trafficking in Persons Feb 2009 FAR 52.223-18 Encouraging Contractor Policy to Ban Text Messaging While Driving Aug 2011 FAR 52.232-33 Payment by Electronic Funds Transfer-Central Contractor Registration Oct 2003 FAR 52.233-1 Alt I Disputes - Alternate I (Dec 1991) Jul 2002 FAR 52.233-3 Protest After Award Aug 1996 FAR 52.237-2 Protection of Government Buildings, Equipment and Vegetation Apr 1984 FAR 52-242-13 Bankruptcy Jul 1995 FAR 52.243-1 Alt 1 Changes - Fixed Price Alt 1 (Apr 1984) Aug 1987 FAR 52.247-34 F.o.b. Destination Nov 1991 FAR 52.249-8 Default Apr 1984 FAR 52.253-1 Computer Generated Forms Jan 1991 DFARS 252.203-7000 Requirements Relating to Compensation of Former DoD Officials Sep 2011 DFARS 252.203-7005 Representation Relating to Compensation of Former DoD Officials Nov 2011 DFARS 252-204-7003 Control of Government Personnel Work Product Apr 1992 DFARS 252.204-7004 Alt A Central Contractor Registration (52.204-7) Alternate A Sep 2007 DFARS 252.211-7003 Item Identification and Valuation Jun 2011 DFARS 252.212-7001 Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items Mar 2012 DFARS 252.232-7010 Levies on Contract Payments Dec 2006 DFARS 252.247-7023 Alt III Transportation of Supplies by Sea Alt III May 2002 SOFARS 5652.204-9004 Foreign Persons Jan 2006 SOFARS 5652.233-9000 Independent Review of Agency Protests Aug 2011 SOFARS 5652.237-9000 Contractor Personnel Changes Jan 1998 Please note that due to character limitation in FedBizOpps, full text of the Federal Acquisition Regulation (FAR) can be accessed on the internet at http://www.farsite.hill.af.mil. All FAR Representation and Certifications shall be submitted through www.sam.gov. FAR 52.204-99 (DEVIATION) System for Award Management Registration (August 2012)(DEVIATION) (a) Definitions. As used in this clause- "Central Contractor Registration (CCR) database" means the retired primary Government repository for Contractor information required for the conduct of business with the Government. "Commercial and Government Entity (CAGE) code" means- (1) A code assigned by the Defense Logistics Agency (DLA) Logistics Information Service to identify a commercial or Government entity; or (2) A code assigned by a member of the North Atlantic Treaty Organization that DLA records and maintains in the CAGE master file. This type of code is known as an "NCAGE code." "Data Universal Numbering System (DUNS) number" means the 9-digit number assigned by Dun and Bradstreet, Inc. (D&B) to identify unique business entities. "Data Universal Numbering System+4 (DUNS+4) number" means the DUNS number means the number assigned by D&B plus a 4-character suffix that may be assigned by a business concern. (D&B has no affiliation with this 4-character suffix.) This 4-character suffix may be assigned at the discretion of the business concern to establish additional SAM records for identifying alternative Electronic Funds Transfer (EFT) accounts (see the FAR at Subpart 32.11) for the same concern. "Registered in the SAM database" means that- (1) The Contractor has entered all mandatory information, including the DUNS number or the DUNS+4 number, into the SAM database; (2) The Contractor's CAGE code is in the SAM database; and (3) The Government has validated all mandatory data fields, to include validation of the Taxpayer Identification Number (TIN) with the Internal Revenue Service (IRS), and has marked the record "Active". The Contractor will be required to provide consent for TIN validation to the Government as a part of the SAM registration process. "System for Award Management (SAM)" means the primary Government repository for prospective federal awardee information and the centralized Government system for certain contracting, grants, and other assistance related processes. It includes- (1) Data collected from prospective federal awardees required for the conduct of business with the Government; (2) Prospective contractor submitted annual representations and certifications in accordance with FAR Subpart 4.12; and (3) The list of all parties suspended, proposed for debarment, debarred, declared ineligible, or excluded or disqualified under the nonprocurement common rule by agencies, Government corporations, or by the Government Accountability Office. (b)(1) The Contractor shall be registered in the SAM database prior to submitting an invoice and through final payment of any contract, basic agreement, basic ordering agreement, or blanket purchasing agreement resulting from this solicitation. (2) The SAM registration shall be for the same name and address identified on the contract, with its associated CAGE code and DUNS or DUNS+4. (3) If indicated by the Government during performance, registration in an alternate system may be required in lieu of SAM. (c) If the Contractor does not have a DUNS number, it should contact Dun and Bradstreet directly to obtain one. (1) A contractor may obtain a DUNS number- (i) Via the internet at http://fedgov.dnb.com/webform or if the contractor does not have internet access, it may call Dun and Bradstreet at 1-866-705-5711 if located within the United States; or (ii) If located outside the United States, by contacting the local Dun and Bradstreet office. The contractor should indicate that it is a contractor for a U.S. Government contract when contacting the local Dun and Bradstreet office. (2) The Contractor should be prepared to provide the following information: (i) Company legal business name. (ii) Tradestyle, doing business, or other name by which your entity is commonly recognized. (iii) Company physical street address, city, state and Zip Code. (iv) Company mailing address, city, state and Zip Code (if separate from physical). (v) Company telephone number. (vi) Date the company was started. (vii) Number of employees at your location. (viii) Chief executive officer/key manager. (ix) Line of business (industry). (x) Company Headquarters name and address (reporting relationship within your entity). (d) Reserved. (e) Processing time for registration in SAM, which normally takes five business days, should be taken into consideration when registering. Contractors who are not already registered should consider applying for registration at least two weeks prior to invoicing. (f) The Contractor is responsible for the accuracy and completeness of the data within the SAM database, and for any liability resulting from the Government's reliance on inaccurate or incomplete data. To remain registered in the SAM database after the initial registration, the Contractor is required to review and update on an annual basis from the date of initial registration or subsequent updates its information in the SAM database to ensure it is current, accurate and complete. Updating information in the SAM does not alter the terms and conditions of this contract and is not a substitute for a properly executed contractual document. (g)(1)(i) If a Contractor has legally changed its business name, "doing business as" name, or division name (whichever is shown on the contract), or has transferred the assets used in performing the contract, but has not completed the necessary requirements regarding novation and change-of-name agreements in Subpart 42.12, the Contractor shall provide the responsible Contracting Officer sufficient documentation to support the legally changed name with a minimum of one business day's written notification of its intention to- (A) Change the name in the SAM database; (B) Comply with the requirements of subpart 42.12 of the FAR; and (C) Agree in writing to the timeline and procedures specified by the responsible Contracting Officer. (ii) If the Contractor fails to comply with the requirements of paragraph (g)(1)(i) of this clause, or fails to perform the agreement at paragraph (g)(1)(i)(C) of this clause, and, in the absence of a properly executed novation or change-of-name agreement, the SAM information that shows the Contractor to be other than the Contractor indicated in the contract will be considered to be incorrect information within the meaning of the "Suspension of Payment" paragraph of the electronic funds transfer (EFT) clause of this contract. (2) The Contractor shall not change the name or address for EFT payments or manual payments, as appropriate, in the SAM record to reflect an assignee for the purpose of assignment of claims (see FAR Subpart 32.8, Assignment of Claims). Assignees shall be separately registered in the SAM database. Information provided to the Contractor's SAM record that indicates payments, including those made by EFT, to an ultimate recipient other than that Contractor will be considered to be incorrect information within the meaning of the "Suspension of payment" paragraph of the EFT clause of this contract. (h) Contractors may obtain information on registration and annual confirmation requirements via the SAM accessed through https://www.acquisition.gov or by calling 866-606-8220, or 334-206-7828 for international calls. (End of Clause) FAR 52.212-2 EVALUATION--COMMERCIAL ITEMS (JAN 1999) (a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers in descending order of importance: (i) Technical - Offeror shall provide documentation that demonstrate that it meets the requirements of this solicitation. Key Performance Parameters: a. Realistic appearance of simulated weapons. b. Actual weight of simulated prop to real weapon. c. Design and lettering on crates must be consistent with simulated country of origin. d. Approximately ninety percent (90%) of the items must appear ages as if they have been in a war zone for may years; the remainder of items may appear to be of recent manufacture. No single item shall lot of items shall appear to be of recent manufacture in order to meet the requirement. (ii) Past Performance - Offerors shall provide name, title, and phone number of principal for no less than three prior or current contracts/agreements for similar scoped projects performed during the previous three years. To be technically acceptable, the submitting offeror must submit relevant and current past performance in ALL areas noted in this combined synopsis/solicitation. The Government will evaluate each offeror's experience on the basis of its depth and its relevance to the work that will be required under the prospective contract. (iii) Price - Offerors shall provide a detailed price quote. All line items will be reviewed for price reasonableness. (b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s). (c) A written notice of award or acceptance of an offer mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. FAR 52.217-7 Option for Increased Quantity -- Separately Priced Line Item (Mar 1989) The Government may require the delivery of the numbered line item, identified in the Schedule as an option item, in the quantity and at the price stated in the Schedule. The Contracting Officer may exercise the option by written notice to the Contractor within 365 days (1 year) after contract award. Delivery of added items shall continue at the same rate that like items are called for under the contract, unless the parties otherwise agree. FAR 52.212-3 Alt 1 Offeror Representations and Certifications Commercial Items (Apr 2011) - Alternate 1 April 2012 FAR 52.252-2 Clauses Incorporated By Reference Feb 1998 FAR 52.252-5 Authorized Deviations in Provisions Apr 1984 FAR 52.252-6 Authorized Deviations in Clauses Apr 1984 SOFARS 5652.201-9002 Authorized Changes Only By Contracting Officer (Jan 2005) The Contractor shall not comply with any order, direction or request of Government personnel unless it is issued in writing and signed by the Contracting Officer, or is pursuant to specific authority otherwise included as part of this contract. Except as specified herein, no order, statement, or conduct of Government personnel who visit the contractor's facilities or in any other manner communicates with Contractor personnel during the performance of this contract shall constitute a change under the Changes clause in Section I. In the event the Contractor effects any change at the direction of any person other the Contracting Officer, the change will be considered to have been made without authority and no adjustment will be made in the contract price to cover any increase in cost incurred as a result thereof. The address and telephone number of the Contracting Officer is Ana Downes, telephone (757) 893-2722. Offerors must scrutinize this solicitation and ensure their proposals and submissions comply with all requirements. It is not sufficient to merely state your proposal complies with the solicitation requirements. You must clearly identify how your proposal meets ALL of the solicitation requirements. All questions concerning this procurement, either technical or contractual must be submitted in writing to the Contracting Office. No direct discussion between the technical representative and a prospective offeror will be conducted unless it is deemed necessary by the Contracting Officer. Questions shall be sent by email the following point of contact: Danyiele Peterson, Contract Specialist; Email address: danyiele.peterson@vb.socom.mil. Quotes must be received no later than 02:00 PM. Eastern Standard Time (EST) on 07 Sep 2012. Quotes received after this time frame will not be considered for award. The Government will award the contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation and will be most advantageous to the Government based on best value. The prospective offeror must be registered with the System for Award Management (SAM) website at http://www.sam.gov to be considered for award. The offeror agrees to hold the prices in its quote firm for 90 calendar days from the date specified for receipt of quotes. Quotes can be faxed, emailed or mailed in the United States postal mail to NSWDG, Attn: Danyiele Peterson, 1636 Regulus Avenue, Virginia Beach, Virginia 23461-2299.
Web Link: FBO.gov Permalink
(https://www.fbo.gov/spg/ODA/USSOCOM/VirginiaBeachVA/H92244-12-T-0308/listing.html)
Record: SN02854115-W 20120826/120824235753-13bfb0f1e74864dba9a1881ecec69aa0 (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

99 -- FAUX WEAPON